#[non_exhaustive]pub struct ModifyVpcAttributeInputBuilder { /* private fields */ }
Expand description
A builder for ModifyVpcAttributeInput
.
Implementations§
Source§impl ModifyVpcAttributeInputBuilder
impl ModifyVpcAttributeInputBuilder
Sourcepub fn enable_dns_hostnames(self, input: AttributeBooleanValue) -> Self
pub fn enable_dns_hostnames(self, input: AttributeBooleanValue) -> Self
Indicates whether the instances launched in the VPC get DNS hostnames. If enabled, instances in the VPC get DNS hostnames; otherwise, they do not.
You cannot modify the DNS resolution and DNS hostnames attributes in the same request. Use separate requests for each attribute. You can only enable DNS hostnames if you've enabled DNS support.
Sourcepub fn set_enable_dns_hostnames(
self,
input: Option<AttributeBooleanValue>,
) -> Self
pub fn set_enable_dns_hostnames( self, input: Option<AttributeBooleanValue>, ) -> Self
Indicates whether the instances launched in the VPC get DNS hostnames. If enabled, instances in the VPC get DNS hostnames; otherwise, they do not.
You cannot modify the DNS resolution and DNS hostnames attributes in the same request. Use separate requests for each attribute. You can only enable DNS hostnames if you've enabled DNS support.
Sourcepub fn get_enable_dns_hostnames(&self) -> &Option<AttributeBooleanValue>
pub fn get_enable_dns_hostnames(&self) -> &Option<AttributeBooleanValue>
Indicates whether the instances launched in the VPC get DNS hostnames. If enabled, instances in the VPC get DNS hostnames; otherwise, they do not.
You cannot modify the DNS resolution and DNS hostnames attributes in the same request. Use separate requests for each attribute. You can only enable DNS hostnames if you've enabled DNS support.
Sourcepub fn enable_dns_support(self, input: AttributeBooleanValue) -> Self
pub fn enable_dns_support(self, input: AttributeBooleanValue) -> Self
Indicates whether the DNS resolution is supported for the VPC. If enabled, queries to the Amazon provided DNS server at the 169.254.169.253 IP address, or the reserved IP address at the base of the VPC network range "plus two" succeed. If disabled, the Amazon provided DNS service in the VPC that resolves public DNS hostnames to IP addresses is not enabled.
You cannot modify the DNS resolution and DNS hostnames attributes in the same request. Use separate requests for each attribute.
Sourcepub fn set_enable_dns_support(
self,
input: Option<AttributeBooleanValue>,
) -> Self
pub fn set_enable_dns_support( self, input: Option<AttributeBooleanValue>, ) -> Self
Indicates whether the DNS resolution is supported for the VPC. If enabled, queries to the Amazon provided DNS server at the 169.254.169.253 IP address, or the reserved IP address at the base of the VPC network range "plus two" succeed. If disabled, the Amazon provided DNS service in the VPC that resolves public DNS hostnames to IP addresses is not enabled.
You cannot modify the DNS resolution and DNS hostnames attributes in the same request. Use separate requests for each attribute.
Sourcepub fn get_enable_dns_support(&self) -> &Option<AttributeBooleanValue>
pub fn get_enable_dns_support(&self) -> &Option<AttributeBooleanValue>
Indicates whether the DNS resolution is supported for the VPC. If enabled, queries to the Amazon provided DNS server at the 169.254.169.253 IP address, or the reserved IP address at the base of the VPC network range "plus two" succeed. If disabled, the Amazon provided DNS service in the VPC that resolves public DNS hostnames to IP addresses is not enabled.
You cannot modify the DNS resolution and DNS hostnames attributes in the same request. Use separate requests for each attribute.
Sourcepub fn vpc_id(self, input: impl Into<String>) -> Self
pub fn vpc_id(self, input: impl Into<String>) -> Self
The ID of the VPC.
This field is required.Sourcepub fn set_vpc_id(self, input: Option<String>) -> Self
pub fn set_vpc_id(self, input: Option<String>) -> Self
The ID of the VPC.
Sourcepub fn get_vpc_id(&self) -> &Option<String>
pub fn get_vpc_id(&self) -> &Option<String>
The ID of the VPC.
Sourcepub fn enable_network_address_usage_metrics(
self,
input: AttributeBooleanValue,
) -> Self
pub fn enable_network_address_usage_metrics( self, input: AttributeBooleanValue, ) -> Self
Indicates whether Network Address Usage metrics are enabled for your VPC.
Sourcepub fn set_enable_network_address_usage_metrics(
self,
input: Option<AttributeBooleanValue>,
) -> Self
pub fn set_enable_network_address_usage_metrics( self, input: Option<AttributeBooleanValue>, ) -> Self
Indicates whether Network Address Usage metrics are enabled for your VPC.
Sourcepub fn get_enable_network_address_usage_metrics(
&self,
) -> &Option<AttributeBooleanValue>
pub fn get_enable_network_address_usage_metrics( &self, ) -> &Option<AttributeBooleanValue>
Indicates whether Network Address Usage metrics are enabled for your VPC.
Sourcepub fn build(self) -> Result<ModifyVpcAttributeInput, BuildError>
pub fn build(self) -> Result<ModifyVpcAttributeInput, BuildError>
Consumes the builder and constructs a ModifyVpcAttributeInput
.
Source§impl ModifyVpcAttributeInputBuilder
impl ModifyVpcAttributeInputBuilder
Sourcepub async fn send_with(
self,
client: &Client,
) -> Result<ModifyVpcAttributeOutput, SdkError<ModifyVpcAttributeError, HttpResponse>>
pub async fn send_with( self, client: &Client, ) -> Result<ModifyVpcAttributeOutput, SdkError<ModifyVpcAttributeError, HttpResponse>>
Sends a request with this input using the given client.
Trait Implementations§
Source§impl Clone for ModifyVpcAttributeInputBuilder
impl Clone for ModifyVpcAttributeInputBuilder
Source§fn clone(&self) -> ModifyVpcAttributeInputBuilder
fn clone(&self) -> ModifyVpcAttributeInputBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Default for ModifyVpcAttributeInputBuilder
impl Default for ModifyVpcAttributeInputBuilder
Source§fn default() -> ModifyVpcAttributeInputBuilder
fn default() -> ModifyVpcAttributeInputBuilder
Source§impl PartialEq for ModifyVpcAttributeInputBuilder
impl PartialEq for ModifyVpcAttributeInputBuilder
Source§fn eq(&self, other: &ModifyVpcAttributeInputBuilder) -> bool
fn eq(&self, other: &ModifyVpcAttributeInputBuilder) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for ModifyVpcAttributeInputBuilder
Auto Trait Implementations§
impl Freeze for ModifyVpcAttributeInputBuilder
impl RefUnwindSafe for ModifyVpcAttributeInputBuilder
impl Send for ModifyVpcAttributeInputBuilder
impl Sync for ModifyVpcAttributeInputBuilder
impl Unpin for ModifyVpcAttributeInputBuilder
impl UnwindSafe for ModifyVpcAttributeInputBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);