#[non_exhaustive]pub struct ModifyNetworkInterfaceAttributeInput {
pub ena_srd_specification: Option<EnaSrdSpecification>,
pub enable_primary_ipv6: Option<bool>,
pub connection_tracking_specification: Option<ConnectionTrackingSpecificationRequest>,
pub associate_public_ip_address: Option<bool>,
pub associated_subnet_ids: Option<Vec<String>>,
pub dry_run: Option<bool>,
pub network_interface_id: Option<String>,
pub description: Option<AttributeValue>,
pub source_dest_check: Option<AttributeBooleanValue>,
pub groups: Option<Vec<String>>,
pub attachment: Option<NetworkInterfaceAttachmentChanges>,
}Expand description
Contains the parameters for ModifyNetworkInterfaceAttribute.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.ena_srd_specification: Option<EnaSrdSpecification>Updates the ENA Express configuration for the network interface that’s attached to the instance.
enable_primary_ipv6: Option<bool>If you’re modifying a network interface in a dual-stack or IPv6-only subnet, you have the option to assign a primary IPv6 IP address. A primary IPv6 address is an IPv6 GUA address associated with an ENI that you have enabled to use a primary IPv6 address. Use this option if the instance that this ENI will be attached to relies on its IPv6 address not changing. Amazon Web Services will automatically assign an IPv6 address associated with the ENI attached to your instance to be the primary IPv6 address. Once you enable an IPv6 GUA address to be a primary IPv6, you cannot disable it. When you enable an IPv6 GUA address to be a primary IPv6, the first IPv6 GUA will be made the primary IPv6 address until the instance is terminated or the network interface is detached. If you have multiple IPv6 addresses associated with an ENI attached to your instance and you enable a primary IPv6 address, the first IPv6 GUA address associated with the ENI becomes the primary IPv6 address.
connection_tracking_specification: Option<ConnectionTrackingSpecificationRequest>A connection tracking specification.
associate_public_ip_address: Option<bool>Indicates whether to assign a public IPv4 address to a network interface. This option can be enabled for any network interface but will only apply to the primary network interface (eth0).
associated_subnet_ids: Option<Vec<String>>A list of subnet IDs to associate with the network interface.
dry_run: Option<bool>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
network_interface_id: Option<String>The ID of the network interface.
description: Option<AttributeValue>A description for the network interface.
source_dest_check: Option<AttributeBooleanValue>Enable or disable source/destination checks, which ensure that the instance is either the source or the destination of any traffic that it receives. If the value is true, source/destination checks are enabled; otherwise, they are disabled. The default value is true. You must disable source/destination checks if the instance runs services such as network address translation, routing, or firewalls.
groups: Option<Vec<String>>Changes the security groups for the network interface. The new set of groups you specify replaces the current set. You must specify at least one group, even if it's just the default security group in the VPC. You must specify the ID of the security group, not the name.
attachment: Option<NetworkInterfaceAttachmentChanges>Information about the interface attachment. If modifying the delete on termination attribute, you must specify the ID of the interface attachment.
Implementations§
Source§impl ModifyNetworkInterfaceAttributeInput
impl ModifyNetworkInterfaceAttributeInput
Sourcepub fn ena_srd_specification(&self) -> Option<&EnaSrdSpecification>
pub fn ena_srd_specification(&self) -> Option<&EnaSrdSpecification>
Updates the ENA Express configuration for the network interface that’s attached to the instance.
Sourcepub fn enable_primary_ipv6(&self) -> Option<bool>
pub fn enable_primary_ipv6(&self) -> Option<bool>
If you’re modifying a network interface in a dual-stack or IPv6-only subnet, you have the option to assign a primary IPv6 IP address. A primary IPv6 address is an IPv6 GUA address associated with an ENI that you have enabled to use a primary IPv6 address. Use this option if the instance that this ENI will be attached to relies on its IPv6 address not changing. Amazon Web Services will automatically assign an IPv6 address associated with the ENI attached to your instance to be the primary IPv6 address. Once you enable an IPv6 GUA address to be a primary IPv6, you cannot disable it. When you enable an IPv6 GUA address to be a primary IPv6, the first IPv6 GUA will be made the primary IPv6 address until the instance is terminated or the network interface is detached. If you have multiple IPv6 addresses associated with an ENI attached to your instance and you enable a primary IPv6 address, the first IPv6 GUA address associated with the ENI becomes the primary IPv6 address.
Sourcepub fn connection_tracking_specification(
&self,
) -> Option<&ConnectionTrackingSpecificationRequest>
pub fn connection_tracking_specification( &self, ) -> Option<&ConnectionTrackingSpecificationRequest>
A connection tracking specification.
Sourcepub fn associate_public_ip_address(&self) -> Option<bool>
pub fn associate_public_ip_address(&self) -> Option<bool>
Indicates whether to assign a public IPv4 address to a network interface. This option can be enabled for any network interface but will only apply to the primary network interface (eth0).
Sourcepub fn associated_subnet_ids(&self) -> &[String]
pub fn associated_subnet_ids(&self) -> &[String]
A list of subnet IDs to associate with the network interface.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .associated_subnet_ids.is_none().
Sourcepub fn dry_run(&self) -> Option<bool>
pub fn dry_run(&self) -> Option<bool>
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn network_interface_id(&self) -> Option<&str>
pub fn network_interface_id(&self) -> Option<&str>
The ID of the network interface.
Sourcepub fn description(&self) -> Option<&AttributeValue>
pub fn description(&self) -> Option<&AttributeValue>
A description for the network interface.
Sourcepub fn source_dest_check(&self) -> Option<&AttributeBooleanValue>
pub fn source_dest_check(&self) -> Option<&AttributeBooleanValue>
Enable or disable source/destination checks, which ensure that the instance is either the source or the destination of any traffic that it receives. If the value is true, source/destination checks are enabled; otherwise, they are disabled. The default value is true. You must disable source/destination checks if the instance runs services such as network address translation, routing, or firewalls.
Sourcepub fn groups(&self) -> &[String]
pub fn groups(&self) -> &[String]
Changes the security groups for the network interface. The new set of groups you specify replaces the current set. You must specify at least one group, even if it's just the default security group in the VPC. You must specify the ID of the security group, not the name.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .groups.is_none().
Sourcepub fn attachment(&self) -> Option<&NetworkInterfaceAttachmentChanges>
pub fn attachment(&self) -> Option<&NetworkInterfaceAttachmentChanges>
Information about the interface attachment. If modifying the delete on termination attribute, you must specify the ID of the interface attachment.
Source§impl ModifyNetworkInterfaceAttributeInput
impl ModifyNetworkInterfaceAttributeInput
Sourcepub fn builder() -> ModifyNetworkInterfaceAttributeInputBuilder
pub fn builder() -> ModifyNetworkInterfaceAttributeInputBuilder
Creates a new builder-style object to manufacture ModifyNetworkInterfaceAttributeInput.
Trait Implementations§
Source§impl Clone for ModifyNetworkInterfaceAttributeInput
impl Clone for ModifyNetworkInterfaceAttributeInput
Source§fn clone(&self) -> ModifyNetworkInterfaceAttributeInput
fn clone(&self) -> ModifyNetworkInterfaceAttributeInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl PartialEq for ModifyNetworkInterfaceAttributeInput
impl PartialEq for ModifyNetworkInterfaceAttributeInput
Source§fn eq(&self, other: &ModifyNetworkInterfaceAttributeInput) -> bool
fn eq(&self, other: &ModifyNetworkInterfaceAttributeInput) -> bool
self and other values to be equal, and is used by ==.impl StructuralPartialEq for ModifyNetworkInterfaceAttributeInput
Auto Trait Implementations§
impl Freeze for ModifyNetworkInterfaceAttributeInput
impl RefUnwindSafe for ModifyNetworkInterfaceAttributeInput
impl Send for ModifyNetworkInterfaceAttributeInput
impl Sync for ModifyNetworkInterfaceAttributeInput
impl Unpin for ModifyNetworkInterfaceAttributeInput
impl UnwindSafe for ModifyNetworkInterfaceAttributeInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);