#[non_exhaustive]pub struct ModifyLocalGatewayRouteInput {
pub destination_cidr_block: Option<String>,
pub local_gateway_route_table_id: Option<String>,
pub local_gateway_virtual_interface_group_id: Option<String>,
pub network_interface_id: Option<String>,
pub dry_run: Option<bool>,
pub destination_prefix_list_id: Option<String>,
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.destination_cidr_block: Option<String>
The CIDR block used for destination matches. The value that you provide must match the CIDR of an existing route in the table.
local_gateway_route_table_id: Option<String>
The ID of the local gateway route table.
local_gateway_virtual_interface_group_id: Option<String>
The ID of the virtual interface group.
network_interface_id: Option<String>
The ID of the network interface.
dry_run: Option<bool>
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation
. Otherwise, it is UnauthorizedOperation
.
destination_prefix_list_id: Option<String>
The ID of the prefix list. Use a prefix list in place of DestinationCidrBlock
. You cannot use DestinationPrefixListId
and DestinationCidrBlock
in the same request.
Implementations§
Source§impl ModifyLocalGatewayRouteInput
impl ModifyLocalGatewayRouteInput
Sourcepub fn destination_cidr_block(&self) -> Option<&str>
pub fn destination_cidr_block(&self) -> Option<&str>
The CIDR block used for destination matches. The value that you provide must match the CIDR of an existing route in the table.
Sourcepub fn local_gateway_route_table_id(&self) -> Option<&str>
pub fn local_gateway_route_table_id(&self) -> Option<&str>
The ID of the local gateway route table.
Sourcepub fn local_gateway_virtual_interface_group_id(&self) -> Option<&str>
pub fn local_gateway_virtual_interface_group_id(&self) -> Option<&str>
The ID of the virtual interface group.
Sourcepub fn network_interface_id(&self) -> Option<&str>
pub fn network_interface_id(&self) -> Option<&str>
The ID of the network interface.
Sourcepub fn dry_run(&self) -> Option<bool>
pub fn dry_run(&self) -> Option<bool>
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation
. Otherwise, it is UnauthorizedOperation
.
Sourcepub fn destination_prefix_list_id(&self) -> Option<&str>
pub fn destination_prefix_list_id(&self) -> Option<&str>
The ID of the prefix list. Use a prefix list in place of DestinationCidrBlock
. You cannot use DestinationPrefixListId
and DestinationCidrBlock
in the same request.
Source§impl ModifyLocalGatewayRouteInput
impl ModifyLocalGatewayRouteInput
Sourcepub fn builder() -> ModifyLocalGatewayRouteInputBuilder
pub fn builder() -> ModifyLocalGatewayRouteInputBuilder
Creates a new builder-style object to manufacture ModifyLocalGatewayRouteInput
.
Trait Implementations§
Source§impl Clone for ModifyLocalGatewayRouteInput
impl Clone for ModifyLocalGatewayRouteInput
Source§fn clone(&self) -> ModifyLocalGatewayRouteInput
fn clone(&self) -> ModifyLocalGatewayRouteInput
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl Debug for ModifyLocalGatewayRouteInput
impl Debug for ModifyLocalGatewayRouteInput
Source§impl PartialEq for ModifyLocalGatewayRouteInput
impl PartialEq for ModifyLocalGatewayRouteInput
Source§fn eq(&self, other: &ModifyLocalGatewayRouteInput) -> bool
fn eq(&self, other: &ModifyLocalGatewayRouteInput) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for ModifyLocalGatewayRouteInput
Auto Trait Implementations§
impl Freeze for ModifyLocalGatewayRouteInput
impl RefUnwindSafe for ModifyLocalGatewayRouteInput
impl Send for ModifyLocalGatewayRouteInput
impl Sync for ModifyLocalGatewayRouteInput
impl Unpin for ModifyLocalGatewayRouteInput
impl UnwindSafe for ModifyLocalGatewayRouteInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);