pub struct GetRouteServerRoutingDatabaseFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to GetRouteServerRoutingDatabase.
Gets the routing database for the specified route server. The Routing Information Base (RIB) serves as a database that stores all the routing information and network topology data collected by a router or routing system, such as routes learned from BGP peers. The RIB is constantly updated as new routing information is received or existing routes change. This ensures that the route server always has the most current view of the network topology and can make optimal routing decisions.
Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and internet gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.
Route server supports the follow route table types:
-
VPC route tables not associated with subnets
-
Subnet route tables
-
Internet gateway route tables
Route server does not support route tables associated with virtual private gateways. To propagate routes into a transit gateway route table, use Transit Gateway Connect.
Implementations§
Source§impl GetRouteServerRoutingDatabaseFluentBuilder
impl GetRouteServerRoutingDatabaseFluentBuilder
Sourcepub fn as_input(&self) -> &GetRouteServerRoutingDatabaseInputBuilder
pub fn as_input(&self) -> &GetRouteServerRoutingDatabaseInputBuilder
Access the GetRouteServerRoutingDatabase as a reference.
Sourcepub async fn send(
self,
) -> Result<GetRouteServerRoutingDatabaseOutput, SdkError<GetRouteServerRoutingDatabaseError, HttpResponse>>
pub async fn send( self, ) -> Result<GetRouteServerRoutingDatabaseOutput, SdkError<GetRouteServerRoutingDatabaseError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<GetRouteServerRoutingDatabaseOutput, GetRouteServerRoutingDatabaseError, Self>
pub fn customize( self, ) -> CustomizableOperation<GetRouteServerRoutingDatabaseOutput, GetRouteServerRoutingDatabaseError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn route_server_id(self, input: impl Into<String>) -> Self
pub fn route_server_id(self, input: impl Into<String>) -> Self
The ID of the route server for which to get the routing database.
Sourcepub fn set_route_server_id(self, input: Option<String>) -> Self
pub fn set_route_server_id(self, input: Option<String>) -> Self
The ID of the route server for which to get the routing database.
Sourcepub fn get_route_server_id(&self) -> &Option<String>
pub fn get_route_server_id(&self) -> &Option<String>
The ID of the route server for which to get the routing database.
Sourcepub fn next_token(self, input: impl Into<String>) -> Self
pub fn next_token(self, input: impl Into<String>) -> Self
The token for the next page of results.
Sourcepub fn set_next_token(self, input: Option<String>) -> Self
pub fn set_next_token(self, input: Option<String>) -> Self
The token for the next page of results.
Sourcepub fn get_next_token(&self) -> &Option<String>
pub fn get_next_token(&self) -> &Option<String>
The token for the next page of results.
Sourcepub fn max_results(self, input: i32) -> Self
pub fn max_results(self, input: i32) -> Self
The maximum number of routing database entries to return in a single response.
Sourcepub fn set_max_results(self, input: Option<i32>) -> Self
pub fn set_max_results(self, input: Option<i32>) -> Self
The maximum number of routing database entries to return in a single response.
Sourcepub fn get_max_results(&self) -> &Option<i32>
pub fn get_max_results(&self) -> &Option<i32>
The maximum number of routing database entries to return in a single response.
Sourcepub fn dry_run(self, input: bool) -> Self
pub fn dry_run(self, input: bool) -> Self
A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn set_dry_run(self, input: Option<bool>) -> Self
pub fn set_dry_run(self, input: Option<bool>) -> Self
A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn get_dry_run(&self) -> &Option<bool>
pub fn get_dry_run(&self) -> &Option<bool>
A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn filters(self, input: Filter) -> Self
pub fn filters(self, input: Filter) -> Self
Appends an item to Filters.
To override the contents of this collection use set_filters.
Filters to apply to the routing database query.
Sourcepub fn set_filters(self, input: Option<Vec<Filter>>) -> Self
pub fn set_filters(self, input: Option<Vec<Filter>>) -> Self
Filters to apply to the routing database query.
Sourcepub fn get_filters(&self) -> &Option<Vec<Filter>>
pub fn get_filters(&self) -> &Option<Vec<Filter>>
Filters to apply to the routing database query.
Trait Implementations§
Source§impl Clone for GetRouteServerRoutingDatabaseFluentBuilder
impl Clone for GetRouteServerRoutingDatabaseFluentBuilder
Source§fn clone(&self) -> GetRouteServerRoutingDatabaseFluentBuilder
fn clone(&self) -> GetRouteServerRoutingDatabaseFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for GetRouteServerRoutingDatabaseFluentBuilder
impl !RefUnwindSafe for GetRouteServerRoutingDatabaseFluentBuilder
impl Send for GetRouteServerRoutingDatabaseFluentBuilder
impl Sync for GetRouteServerRoutingDatabaseFluentBuilder
impl Unpin for GetRouteServerRoutingDatabaseFluentBuilder
impl !UnwindSafe for GetRouteServerRoutingDatabaseFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);