Struct CreateRouteServerInputBuilder

#[non_exhaustive]
pub struct CreateRouteServerInputBuilder { /* private fields */ }

A builder for CreateRouteServerInput.

Implementations

impl CreateRouteServerInputBuilder

pub fn amazon_side_asn(self, input: i64) -> Self

The private Autonomous System Number (ASN) for the Amazon side of the BGP session. Valid values are from 1 to 4294967295. We recommend using a private ASN in the 64512–65534 (16-bit ASN) or 4200000000–4294967294 (32-bit ASN) range.

This field is required.

pub fn set_amazon_side_asn(self, input: Option<i64>) -> Self

The private Autonomous System Number (ASN) for the Amazon side of the BGP session. Valid values are from 1 to 4294967295. We recommend using a private ASN in the 64512–65534 (16-bit ASN) or 4200000000–4294967294 (32-bit ASN) range.

pub fn get_amazon_side_asn(&self) -> &Option<i64>

The private Autonomous System Number (ASN) for the Amazon side of the BGP session. Valid values are from 1 to 4294967295. We recommend using a private ASN in the 64512–65534 (16-bit ASN) or 4200000000–4294967294 (32-bit ASN) range.

pub fn client_token(self, input: impl Into<String>) -> Self

Unique, case-sensitive identifier to ensure idempotency of the request.

pub fn set_client_token(self, input: Option<String>) -> Self

Unique, case-sensitive identifier to ensure idempotency of the request.

pub fn get_client_token(&self) -> &Option<String>

Unique, case-sensitive identifier to ensure idempotency of the request.

pub fn dry_run(self, input: bool) -> Self

A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn get_dry_run(&self) -> &Option<bool>

A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn persist_routes(self, input: RouteServerPersistRoutesAction) -> Self

Indicates whether routes should be persisted after all BGP sessions are terminated.

pub fn set_persist_routes( self, input: Option<RouteServerPersistRoutesAction>, ) -> Self

Indicates whether routes should be persisted after all BGP sessions are terminated.

pub fn get_persist_routes(&self) -> &Option<RouteServerPersistRoutesAction>

Indicates whether routes should be persisted after all BGP sessions are terminated.

pub fn persist_routes_duration(self, input: i64) -> Self

The number of minutes a route server will wait after BGP is re-established to unpersist the routes in the FIB and RIB. Value must be in the range of 1-5. Required if PersistRoutes is enabled.

If you set the duration to 1 minute, then when your network appliance re-establishes BGP with route server, it has 1 minute to relearn it's adjacent network and advertise those routes to route server before route server resumes normal functionality. In most cases, 1 minute is probably sufficient. If, however, you have concerns that your BGP network may not be capable of fully re-establishing and re-learning everything in 1 minute, you can increase the duration up to 5 minutes.

pub fn set_persist_routes_duration(self, input: Option<i64>) -> Self

The number of minutes a route server will wait after BGP is re-established to unpersist the routes in the FIB and RIB. Value must be in the range of 1-5. Required if PersistRoutes is enabled.

If you set the duration to 1 minute, then when your network appliance re-establishes BGP with route server, it has 1 minute to relearn it's adjacent network and advertise those routes to route server before route server resumes normal functionality. In most cases, 1 minute is probably sufficient. If, however, you have concerns that your BGP network may not be capable of fully re-establishing and re-learning everything in 1 minute, you can increase the duration up to 5 minutes.

pub fn get_persist_routes_duration(&self) -> &Option<i64>

The number of minutes a route server will wait after BGP is re-established to unpersist the routes in the FIB and RIB. Value must be in the range of 1-5. Required if PersistRoutes is enabled.

If you set the duration to 1 minute, then when your network appliance re-establishes BGP with route server, it has 1 minute to relearn it's adjacent network and advertise those routes to route server before route server resumes normal functionality. In most cases, 1 minute is probably sufficient. If, however, you have concerns that your BGP network may not be capable of fully re-establishing and re-learning everything in 1 minute, you can increase the duration up to 5 minutes.

pub fn sns_notifications_enabled(self, input: bool) -> Self

Indicates whether SNS notifications should be enabled for route server events. Enabling SNS notifications persists BGP status changes to an SNS topic provisioned by Amazon Web Services.

pub fn set_sns_notifications_enabled(self, input: Option<bool>) -> Self

Indicates whether SNS notifications should be enabled for route server events. Enabling SNS notifications persists BGP status changes to an SNS topic provisioned by Amazon Web Services.

pub fn get_sns_notifications_enabled(&self) -> &Option<bool>

Indicates whether SNS notifications should be enabled for route server events. Enabling SNS notifications persists BGP status changes to an SNS topic provisioned by Amazon Web Services.

pub fn tag_specifications(self, input: TagSpecification) -> Self

Appends an item to tag_specifications.

To override the contents of this collection use set_tag_specifications.

The tags to apply to the route server during creation.

pub fn set_tag_specifications( self, input: Option<Vec<TagSpecification>>, ) -> Self

The tags to apply to the route server during creation.

pub fn get_tag_specifications(&self) -> &Option<Vec<TagSpecification>>

The tags to apply to the route server during creation.

pub fn build(self) -> Result<CreateRouteServerInput, BuildError>

Consumes the builder and constructs a CreateRouteServerInput.

impl CreateRouteServerInputBuilder

pub async fn send_with( self, client: &Client, ) -> Result<CreateRouteServerOutput, SdkError<CreateRouteServerError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for CreateRouteServerInputBuilder

fn clone(&self) -> CreateRouteServerInputBuilder

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CreateRouteServerInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for CreateRouteServerInputBuilder

fn default() -> CreateRouteServerInputBuilder

Returns the “default value” for a type.

impl PartialEq for CreateRouteServerInputBuilder

fn eq(&self, other: &CreateRouteServerInputBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for CreateRouteServerInputBuilder