#[non_exhaustive]pub struct CreateLocalGatewayVirtualInterfaceInput {
pub local_gateway_virtual_interface_group_id: Option<String>,
pub outpost_lag_id: Option<String>,
pub vlan: Option<i32>,
pub local_address: Option<String>,
pub peer_address: Option<String>,
pub peer_bgp_asn: Option<i32>,
pub tag_specifications: Option<Vec<TagSpecification>>,
pub dry_run: Option<bool>,
pub peer_bgp_asn_extended: Option<i64>,
}
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.local_gateway_virtual_interface_group_id: Option<String>
The ID of the local gateway virtual interface group.
outpost_lag_id: Option<String>
References the Link Aggregation Group (LAG) that connects the Outpost to on-premises network devices.
vlan: Option<i32>
The virtual local area network (VLAN) used for the local gateway virtual interface.
local_address: Option<String>
The IP address assigned to the local gateway virtual interface on the Outpost side. Only IPv4 is supported.
peer_address: Option<String>
The peer IP address for the local gateway virtual interface. Only IPv4 is supported.
peer_bgp_asn: Option<i32>
The Autonomous System Number (ASN) of the Border Gateway Protocol (BGP) peer.
tag_specifications: Option<Vec<TagSpecification>>
The tags to apply to a resource when the local gateway virtual interface is being created.
dry_run: Option<bool>
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation
. Otherwise, it is UnauthorizedOperation
.
peer_bgp_asn_extended: Option<i64>
The extended 32-bit ASN of the BGP peer for use with larger ASN values.
Implementations§
Source§impl CreateLocalGatewayVirtualInterfaceInput
impl CreateLocalGatewayVirtualInterfaceInput
Sourcepub fn local_gateway_virtual_interface_group_id(&self) -> Option<&str>
pub fn local_gateway_virtual_interface_group_id(&self) -> Option<&str>
The ID of the local gateway virtual interface group.
Sourcepub fn outpost_lag_id(&self) -> Option<&str>
pub fn outpost_lag_id(&self) -> Option<&str>
References the Link Aggregation Group (LAG) that connects the Outpost to on-premises network devices.
Sourcepub fn vlan(&self) -> Option<i32>
pub fn vlan(&self) -> Option<i32>
The virtual local area network (VLAN) used for the local gateway virtual interface.
Sourcepub fn local_address(&self) -> Option<&str>
pub fn local_address(&self) -> Option<&str>
The IP address assigned to the local gateway virtual interface on the Outpost side. Only IPv4 is supported.
Sourcepub fn peer_address(&self) -> Option<&str>
pub fn peer_address(&self) -> Option<&str>
The peer IP address for the local gateway virtual interface. Only IPv4 is supported.
Sourcepub fn peer_bgp_asn(&self) -> Option<i32>
pub fn peer_bgp_asn(&self) -> Option<i32>
The Autonomous System Number (ASN) of the Border Gateway Protocol (BGP) peer.
Sourcepub fn tag_specifications(&self) -> &[TagSpecification]
pub fn tag_specifications(&self) -> &[TagSpecification]
The tags to apply to a resource when the local gateway virtual interface is being created.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tag_specifications.is_none()
.
Sourcepub fn dry_run(&self) -> Option<bool>
pub fn dry_run(&self) -> Option<bool>
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation
. Otherwise, it is UnauthorizedOperation
.
Sourcepub fn peer_bgp_asn_extended(&self) -> Option<i64>
pub fn peer_bgp_asn_extended(&self) -> Option<i64>
The extended 32-bit ASN of the BGP peer for use with larger ASN values.
Source§impl CreateLocalGatewayVirtualInterfaceInput
impl CreateLocalGatewayVirtualInterfaceInput
Sourcepub fn builder() -> CreateLocalGatewayVirtualInterfaceInputBuilder
pub fn builder() -> CreateLocalGatewayVirtualInterfaceInputBuilder
Creates a new builder-style object to manufacture CreateLocalGatewayVirtualInterfaceInput
.
Trait Implementations§
Source§impl Clone for CreateLocalGatewayVirtualInterfaceInput
impl Clone for CreateLocalGatewayVirtualInterfaceInput
Source§fn clone(&self) -> CreateLocalGatewayVirtualInterfaceInput
fn clone(&self) -> CreateLocalGatewayVirtualInterfaceInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreSource§impl PartialEq for CreateLocalGatewayVirtualInterfaceInput
impl PartialEq for CreateLocalGatewayVirtualInterfaceInput
Source§fn eq(&self, other: &CreateLocalGatewayVirtualInterfaceInput) -> bool
fn eq(&self, other: &CreateLocalGatewayVirtualInterfaceInput) -> bool
self
and other
values to be equal, and is used by ==
.impl StructuralPartialEq for CreateLocalGatewayVirtualInterfaceInput
Auto Trait Implementations§
impl Freeze for CreateLocalGatewayVirtualInterfaceInput
impl RefUnwindSafe for CreateLocalGatewayVirtualInterfaceInput
impl Send for CreateLocalGatewayVirtualInterfaceInput
impl Sync for CreateLocalGatewayVirtualInterfaceInput
impl Unpin for CreateLocalGatewayVirtualInterfaceInput
impl UnwindSafe for CreateLocalGatewayVirtualInterfaceInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);