pub struct CreateDhcpOptionsFluentBuilder { /* private fields */ }
Expand description
Fluent builder constructing a request to CreateDhcpOptions
.
Creates a custom set of DHCP options. After you create a DHCP option set, you associate it with a VPC. After you associate a DHCP option set with a VPC, all existing and newly launched instances in the VPC use this set of DHCP options.
The following are the individual DHCP options you can specify. For more information, see DHCP option sets in the Amazon VPC User Guide.
-
domain-name
- If you're using AmazonProvidedDNS inus-east-1
, specifyec2.internal
. If you're using AmazonProvidedDNS in any other Region, specifyregion.compute.internal
. Otherwise, specify a custom domain name. This value is used to complete unqualified DNS hostnames.Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP option set is associated with a VPC that has instances running operating systems that treat the value as a single domain, specify only one domain name.
-
domain-name-servers
- The IP addresses of up to four DNS servers, or AmazonProvidedDNS. To specify multiple domain name servers in a single parameter, separate the IP addresses using commas. To have your instances receive custom DNS hostnames as specified indomain-name
, you must specify a custom DNS server. -
ntp-servers
- The IP addresses of up to eight Network Time Protocol (NTP) servers (four IPv4 addresses and four IPv6 addresses). -
netbios-name-servers
- The IP addresses of up to four NetBIOS name servers. -
netbios-node-type
- The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2. Broadcast and multicast are not supported. For more information about NetBIOS node types, see RFC 2132. -
ipv6-address-preferred-lease-time
- A value (in seconds, minutes, hours, or years) for how frequently a running instance with an IPv6 assigned to it goes through DHCPv6 lease renewal. Acceptable values are between 140 and 2147483647 seconds (approximately 68 years). If no value is entered, the default lease time is 140 seconds. If you use long-term addressing for EC2 instances, you can increase the lease time and avoid frequent lease renewal requests. Lease renewal typically occurs when half of the lease time has elapsed.
Implementations§
Source§impl CreateDhcpOptionsFluentBuilder
impl CreateDhcpOptionsFluentBuilder
Sourcepub fn as_input(&self) -> &CreateDhcpOptionsInputBuilder
pub fn as_input(&self) -> &CreateDhcpOptionsInputBuilder
Access the CreateDhcpOptions as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateDhcpOptionsOutput, SdkError<CreateDhcpOptionsError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateDhcpOptionsOutput, SdkError<CreateDhcpOptionsError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateDhcpOptionsOutput, CreateDhcpOptionsError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateDhcpOptionsOutput, CreateDhcpOptionsError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn dhcp_configurations(self, input: NewDhcpConfiguration) -> Self
pub fn dhcp_configurations(self, input: NewDhcpConfiguration) -> Self
Appends an item to DhcpConfigurations
.
To override the contents of this collection use set_dhcp_configurations
.
A DHCP configuration option.
Sourcepub fn set_dhcp_configurations(
self,
input: Option<Vec<NewDhcpConfiguration>>,
) -> Self
pub fn set_dhcp_configurations( self, input: Option<Vec<NewDhcpConfiguration>>, ) -> Self
A DHCP configuration option.
Sourcepub fn get_dhcp_configurations(&self) -> &Option<Vec<NewDhcpConfiguration>>
pub fn get_dhcp_configurations(&self) -> &Option<Vec<NewDhcpConfiguration>>
A DHCP configuration option.
Sourcepub fn tag_specifications(self, input: TagSpecification) -> Self
pub fn tag_specifications(self, input: TagSpecification) -> Self
Appends an item to TagSpecifications
.
To override the contents of this collection use set_tag_specifications
.
The tags to assign to the DHCP option.
Sourcepub fn set_tag_specifications(
self,
input: Option<Vec<TagSpecification>>,
) -> Self
pub fn set_tag_specifications( self, input: Option<Vec<TagSpecification>>, ) -> Self
The tags to assign to the DHCP option.
Sourcepub fn get_tag_specifications(&self) -> &Option<Vec<TagSpecification>>
pub fn get_tag_specifications(&self) -> &Option<Vec<TagSpecification>>
The tags to assign to the DHCP option.
Sourcepub fn dry_run(self, input: bool) -> Self
pub fn dry_run(self, input: bool) -> Self
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation
. Otherwise, it is UnauthorizedOperation
.
Sourcepub fn set_dry_run(self, input: Option<bool>) -> Self
pub fn set_dry_run(self, input: Option<bool>) -> Self
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation
. Otherwise, it is UnauthorizedOperation
.
Sourcepub fn get_dry_run(&self) -> &Option<bool>
pub fn get_dry_run(&self) -> &Option<bool>
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation
. Otherwise, it is UnauthorizedOperation
.
Trait Implementations§
Source§impl Clone for CreateDhcpOptionsFluentBuilder
impl Clone for CreateDhcpOptionsFluentBuilder
Source§fn clone(&self) -> CreateDhcpOptionsFluentBuilder
fn clone(&self) -> CreateDhcpOptionsFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read moreAuto Trait Implementations§
impl Freeze for CreateDhcpOptionsFluentBuilder
impl !RefUnwindSafe for CreateDhcpOptionsFluentBuilder
impl Send for CreateDhcpOptionsFluentBuilder
impl Sync for CreateDhcpOptionsFluentBuilder
impl Unpin for CreateDhcpOptionsFluentBuilder
impl !UnwindSafe for CreateDhcpOptionsFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the foreground set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red()
and
green()
, which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg()
:
use yansi::{Paint, Color};
painted.fg(Color::White);
Set foreground color to white using white()
.
use yansi::Paint;
painted.white();
Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self
with the background set to
value
.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red()
and
on_green()
, which have the same functionality but
are pithier.
§Example
Set background color to red using fg()
:
use yansi::{Paint, Color};
painted.bg(Color::Red);
Set background color to red using on_red()
.
use yansi::Paint;
painted.on_red();
Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute
value
.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold()
and
underline()
, which have the same functionality
but are pithier.
§Example
Make text bold using attr()
:
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);
Make text bold using using bold()
.
use yansi::Paint;
painted.bold();
Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi
Quirk
value
.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask()
and
wrap()
, which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk()
:
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);
Enable wrapping using wrap()
.
use yansi::Paint;
painted.wrap();
Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting()
due to conflicts with Vec::clear()
.
The clear()
method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition
value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted
only when both stdout
and stderr
are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);