CreateClientVpnEndpointFluentBuilder

Struct CreateClientVpnEndpointFluentBuilder 

Source
pub struct CreateClientVpnEndpointFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to CreateClientVpnEndpoint.

Creates a Client VPN endpoint. A Client VPN endpoint is the resource you create and configure to enable and manage client VPN sessions. It is the destination endpoint at which all client VPN sessions are terminated.

Implementations§

Source§

impl CreateClientVpnEndpointFluentBuilder

Source

pub fn as_input(&self) -> &CreateClientVpnEndpointInputBuilder

Access the CreateClientVpnEndpoint as a reference.

Source

pub async fn send( self, ) -> Result<CreateClientVpnEndpointOutput, SdkError<CreateClientVpnEndpointError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

Source

pub fn customize( self, ) -> CustomizableOperation<CreateClientVpnEndpointOutput, CreateClientVpnEndpointError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

Source

pub fn client_cidr_block(self, input: impl Into<String>) -> Self

The IPv4 address range, in CIDR notation, from which to assign client IP addresses. The address range cannot overlap with the local CIDR of the VPC in which the associated subnet is located, or the routes that you add manually. The address range cannot be changed after the Client VPN endpoint has been created. Client CIDR range must have a size of at least /22 and must not be greater than /12.

Source

pub fn set_client_cidr_block(self, input: Option<String>) -> Self

The IPv4 address range, in CIDR notation, from which to assign client IP addresses. The address range cannot overlap with the local CIDR of the VPC in which the associated subnet is located, or the routes that you add manually. The address range cannot be changed after the Client VPN endpoint has been created. Client CIDR range must have a size of at least /22 and must not be greater than /12.

Source

pub fn get_client_cidr_block(&self) -> &Option<String>

The IPv4 address range, in CIDR notation, from which to assign client IP addresses. The address range cannot overlap with the local CIDR of the VPC in which the associated subnet is located, or the routes that you add manually. The address range cannot be changed after the Client VPN endpoint has been created. Client CIDR range must have a size of at least /22 and must not be greater than /12.

Source

pub fn server_certificate_arn(self, input: impl Into<String>) -> Self

The ARN of the server certificate. For more information, see the Certificate Manager User Guide.

Source

pub fn set_server_certificate_arn(self, input: Option<String>) -> Self

The ARN of the server certificate. For more information, see the Certificate Manager User Guide.

Source

pub fn get_server_certificate_arn(&self) -> &Option<String>

The ARN of the server certificate. For more information, see the Certificate Manager User Guide.

Source

pub fn authentication_options( self, input: ClientVpnAuthenticationRequest, ) -> Self

Appends an item to AuthenticationOptions.

To override the contents of this collection use set_authentication_options.

Information about the authentication method to be used to authenticate clients.

Source

pub fn set_authentication_options( self, input: Option<Vec<ClientVpnAuthenticationRequest>>, ) -> Self

Information about the authentication method to be used to authenticate clients.

Source

pub fn get_authentication_options( &self, ) -> &Option<Vec<ClientVpnAuthenticationRequest>>

Information about the authentication method to be used to authenticate clients.

Source

pub fn connection_log_options(self, input: ConnectionLogOptions) -> Self

Information about the client connection logging options.

If you enable client connection logging, data about client connections is sent to a Cloudwatch Logs log stream. The following information is logged:

  • Client connection requests

  • Client connection results (successful and unsuccessful)

  • Reasons for unsuccessful client connection requests

  • Client connection termination time

Source

pub fn set_connection_log_options( self, input: Option<ConnectionLogOptions>, ) -> Self

Information about the client connection logging options.

If you enable client connection logging, data about client connections is sent to a Cloudwatch Logs log stream. The following information is logged:

  • Client connection requests

  • Client connection results (successful and unsuccessful)

  • Reasons for unsuccessful client connection requests

  • Client connection termination time

Source

pub fn get_connection_log_options(&self) -> &Option<ConnectionLogOptions>

Information about the client connection logging options.

If you enable client connection logging, data about client connections is sent to a Cloudwatch Logs log stream. The following information is logged:

  • Client connection requests

  • Client connection results (successful and unsuccessful)

  • Reasons for unsuccessful client connection requests

  • Client connection termination time

Source

pub fn dns_servers(self, input: impl Into<String>) -> Self

Appends an item to DnsServers.

To override the contents of this collection use set_dns_servers.

Information about the DNS servers to be used for DNS resolution. A Client VPN endpoint can have up to two DNS servers. If no DNS server is specified, the DNS address configured on the device is used for the DNS server.

Source

pub fn set_dns_servers(self, input: Option<Vec<String>>) -> Self

Information about the DNS servers to be used for DNS resolution. A Client VPN endpoint can have up to two DNS servers. If no DNS server is specified, the DNS address configured on the device is used for the DNS server.

Source

pub fn get_dns_servers(&self) -> &Option<Vec<String>>

Information about the DNS servers to be used for DNS resolution. A Client VPN endpoint can have up to two DNS servers. If no DNS server is specified, the DNS address configured on the device is used for the DNS server.

Source

pub fn transport_protocol(self, input: TransportProtocol) -> Self

The transport protocol to be used by the VPN session.

Default value: udp

Source

pub fn set_transport_protocol(self, input: Option<TransportProtocol>) -> Self

The transport protocol to be used by the VPN session.

Default value: udp

Source

pub fn get_transport_protocol(&self) -> &Option<TransportProtocol>

The transport protocol to be used by the VPN session.

Default value: udp

Source

pub fn vpn_port(self, input: i32) -> Self

The port number to assign to the Client VPN endpoint for TCP and UDP traffic.

Valid Values: 443 | 1194

Default Value: 443

Source

pub fn set_vpn_port(self, input: Option<i32>) -> Self

The port number to assign to the Client VPN endpoint for TCP and UDP traffic.

Valid Values: 443 | 1194

Default Value: 443

Source

pub fn get_vpn_port(&self) -> &Option<i32>

The port number to assign to the Client VPN endpoint for TCP and UDP traffic.

Valid Values: 443 | 1194

Default Value: 443

Source

pub fn description(self, input: impl Into<String>) -> Self

A brief description of the Client VPN endpoint.

Source

pub fn set_description(self, input: Option<String>) -> Self

A brief description of the Client VPN endpoint.

Source

pub fn get_description(&self) -> &Option<String>

A brief description of the Client VPN endpoint.

Source

pub fn split_tunnel(self, input: bool) -> Self

Indicates whether split-tunnel is enabled on the Client VPN endpoint.

By default, split-tunnel on a VPN endpoint is disabled.

For information about split-tunnel VPN endpoints, see Split-tunnel Client VPN endpoint in the Client VPN Administrator Guide.

Source

pub fn set_split_tunnel(self, input: Option<bool>) -> Self

Indicates whether split-tunnel is enabled on the Client VPN endpoint.

By default, split-tunnel on a VPN endpoint is disabled.

For information about split-tunnel VPN endpoints, see Split-tunnel Client VPN endpoint in the Client VPN Administrator Guide.

Source

pub fn get_split_tunnel(&self) -> &Option<bool>

Indicates whether split-tunnel is enabled on the Client VPN endpoint.

By default, split-tunnel on a VPN endpoint is disabled.

For information about split-tunnel VPN endpoints, see Split-tunnel Client VPN endpoint in the Client VPN Administrator Guide.

Source

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

Source

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

Source

pub fn get_dry_run(&self) -> &Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

Source

pub fn client_token(self, input: impl Into<String>) -> Self

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensuring idempotency.

Source

pub fn set_client_token(self, input: Option<String>) -> Self

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensuring idempotency.

Source

pub fn get_client_token(&self) -> &Option<String>

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensuring idempotency.

Source

pub fn tag_specifications(self, input: TagSpecification) -> Self

Appends an item to TagSpecifications.

To override the contents of this collection use set_tag_specifications.

The tags to apply to the Client VPN endpoint during creation.

Source

pub fn set_tag_specifications( self, input: Option<Vec<TagSpecification>>, ) -> Self

The tags to apply to the Client VPN endpoint during creation.

Source

pub fn get_tag_specifications(&self) -> &Option<Vec<TagSpecification>>

The tags to apply to the Client VPN endpoint during creation.

Source

pub fn security_group_ids(self, input: impl Into<String>) -> Self

Appends an item to SecurityGroupIds.

To override the contents of this collection use set_security_group_ids.

The IDs of one or more security groups to apply to the target network. You must also specify the ID of the VPC that contains the security groups.

Source

pub fn set_security_group_ids(self, input: Option<Vec<String>>) -> Self

The IDs of one or more security groups to apply to the target network. You must also specify the ID of the VPC that contains the security groups.

Source

pub fn get_security_group_ids(&self) -> &Option<Vec<String>>

The IDs of one or more security groups to apply to the target network. You must also specify the ID of the VPC that contains the security groups.

Source

pub fn vpc_id(self, input: impl Into<String>) -> Self

The ID of the VPC to associate with the Client VPN endpoint. If no security group IDs are specified in the request, the default security group for the VPC is applied.

Source

pub fn set_vpc_id(self, input: Option<String>) -> Self

The ID of the VPC to associate with the Client VPN endpoint. If no security group IDs are specified in the request, the default security group for the VPC is applied.

Source

pub fn get_vpc_id(&self) -> &Option<String>

The ID of the VPC to associate with the Client VPN endpoint. If no security group IDs are specified in the request, the default security group for the VPC is applied.

Source

pub fn self_service_portal(self, input: SelfServicePortal) -> Self

Specify whether to enable the self-service portal for the Client VPN endpoint.

Default Value: enabled

Source

pub fn set_self_service_portal(self, input: Option<SelfServicePortal>) -> Self

Specify whether to enable the self-service portal for the Client VPN endpoint.

Default Value: enabled

Source

pub fn get_self_service_portal(&self) -> &Option<SelfServicePortal>

Specify whether to enable the self-service portal for the Client VPN endpoint.

Default Value: enabled

Source

pub fn client_connect_options(self, input: ClientConnectOptions) -> Self

The options for managing connection authorization for new client connections.

Source

pub fn set_client_connect_options( self, input: Option<ClientConnectOptions>, ) -> Self

The options for managing connection authorization for new client connections.

Source

pub fn get_client_connect_options(&self) -> &Option<ClientConnectOptions>

The options for managing connection authorization for new client connections.

Source

pub fn session_timeout_hours(self, input: i32) -> Self

The maximum VPN session duration time in hours.

Valid values: 8 | 10 | 12 | 24

Default value: 24

Source

pub fn set_session_timeout_hours(self, input: Option<i32>) -> Self

The maximum VPN session duration time in hours.

Valid values: 8 | 10 | 12 | 24

Default value: 24

Source

pub fn get_session_timeout_hours(&self) -> &Option<i32>

The maximum VPN session duration time in hours.

Valid values: 8 | 10 | 12 | 24

Default value: 24

Source

pub fn client_login_banner_options( self, input: ClientLoginBannerOptions, ) -> Self

Options for enabling a customizable text banner that will be displayed on Amazon Web Services provided clients when a VPN session is established.

Source

pub fn set_client_login_banner_options( self, input: Option<ClientLoginBannerOptions>, ) -> Self

Options for enabling a customizable text banner that will be displayed on Amazon Web Services provided clients when a VPN session is established.

Source

pub fn get_client_login_banner_options( &self, ) -> &Option<ClientLoginBannerOptions>

Options for enabling a customizable text banner that will be displayed on Amazon Web Services provided clients when a VPN session is established.

Source

pub fn client_route_enforcement_options( self, input: ClientRouteEnforcementOptions, ) -> Self

Client route enforcement is a feature of the Client VPN service that helps enforce administrator defined routes on devices connected through the VPN. T his feature helps improve your security posture by ensuring that network traffic originating from a connected client is not inadvertently sent outside the VPN tunnel.

Client route enforcement works by monitoring the route table of a connected device for routing policy changes to the VPN connection. If the feature detects any VPN routing policy modifications, it will automatically force an update to the route table, reverting it back to the expected route configurations.

Source

pub fn set_client_route_enforcement_options( self, input: Option<ClientRouteEnforcementOptions>, ) -> Self

Client route enforcement is a feature of the Client VPN service that helps enforce administrator defined routes on devices connected through the VPN. T his feature helps improve your security posture by ensuring that network traffic originating from a connected client is not inadvertently sent outside the VPN tunnel.

Client route enforcement works by monitoring the route table of a connected device for routing policy changes to the VPN connection. If the feature detects any VPN routing policy modifications, it will automatically force an update to the route table, reverting it back to the expected route configurations.

Source

pub fn get_client_route_enforcement_options( &self, ) -> &Option<ClientRouteEnforcementOptions>

Client route enforcement is a feature of the Client VPN service that helps enforce administrator defined routes on devices connected through the VPN. T his feature helps improve your security posture by ensuring that network traffic originating from a connected client is not inadvertently sent outside the VPN tunnel.

Client route enforcement works by monitoring the route table of a connected device for routing policy changes to the VPN connection. If the feature detects any VPN routing policy modifications, it will automatically force an update to the route table, reverting it back to the expected route configurations.

Source

pub fn disconnect_on_session_timeout(self, input: bool) -> Self

Indicates whether the client VPN session is disconnected after the maximum timeout specified in SessionTimeoutHours is reached. If true, users are prompted to reconnect client VPN. If false, client VPN attempts to reconnect automatically. The default value is true.

Source

pub fn set_disconnect_on_session_timeout(self, input: Option<bool>) -> Self

Indicates whether the client VPN session is disconnected after the maximum timeout specified in SessionTimeoutHours is reached. If true, users are prompted to reconnect client VPN. If false, client VPN attempts to reconnect automatically. The default value is true.

Source

pub fn get_disconnect_on_session_timeout(&self) -> &Option<bool>

Indicates whether the client VPN session is disconnected after the maximum timeout specified in SessionTimeoutHours is reached. If true, users are prompted to reconnect client VPN. If false, client VPN attempts to reconnect automatically. The default value is true.

Source

pub fn endpoint_ip_address_type(self, input: EndpointIpAddressType) -> Self

The IP address type for the Client VPN endpoint. Valid values are ipv4 (default) for IPv4 addressing only, ipv6 for IPv6 addressing only, or dual-stack for both IPv4 and IPv6 addressing. When set to dual-stack, clients can connect to the endpoint using either IPv4 or IPv6 addresses..

Source

pub fn set_endpoint_ip_address_type( self, input: Option<EndpointIpAddressType>, ) -> Self

The IP address type for the Client VPN endpoint. Valid values are ipv4 (default) for IPv4 addressing only, ipv6 for IPv6 addressing only, or dual-stack for both IPv4 and IPv6 addressing. When set to dual-stack, clients can connect to the endpoint using either IPv4 or IPv6 addresses..

Source

pub fn get_endpoint_ip_address_type(&self) -> &Option<EndpointIpAddressType>

The IP address type for the Client VPN endpoint. Valid values are ipv4 (default) for IPv4 addressing only, ipv6 for IPv6 addressing only, or dual-stack for both IPv4 and IPv6 addressing. When set to dual-stack, clients can connect to the endpoint using either IPv4 or IPv6 addresses..

Source

pub fn traffic_ip_address_type(self, input: TrafficIpAddressType) -> Self

The IP address type for traffic within the Client VPN tunnel. Valid values are ipv4 (default) for IPv4 traffic only, ipv6 for IPv6 addressing only, or dual-stack for both IPv4 and IPv6 traffic. When set to dual-stack, clients can access both IPv4 and IPv6 resources through the VPN .

Source

pub fn set_traffic_ip_address_type( self, input: Option<TrafficIpAddressType>, ) -> Self

The IP address type for traffic within the Client VPN tunnel. Valid values are ipv4 (default) for IPv4 traffic only, ipv6 for IPv6 addressing only, or dual-stack for both IPv4 and IPv6 traffic. When set to dual-stack, clients can access both IPv4 and IPv6 resources through the VPN .

Source

pub fn get_traffic_ip_address_type(&self) -> &Option<TrafficIpAddressType>

The IP address type for traffic within the Client VPN tunnel. Valid values are ipv4 (default) for IPv4 traffic only, ipv6 for IPv6 addressing only, or dual-stack for both IPv4 and IPv6 traffic. When set to dual-stack, clients can access both IPv4 and IPv6 resources through the VPN .

Trait Implementations§

Source§

impl Clone for CreateClientVpnEndpointFluentBuilder

Source§

fn clone(&self) -> CreateClientVpnEndpointFluentBuilder

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for CreateClientVpnEndpointFluentBuilder

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,