Struct aws_sdk_ec2::operation::describe_security_groups::builders::DescribeSecurityGroupsInputBuilder

#[non_exhaustive]
pub struct DescribeSecurityGroupsInputBuilder { /* private fields */ }

A builder for DescribeSecurityGroupsInput.

Implementations

impl DescribeSecurityGroupsInputBuilder

pub fn filters(self, input: Filter) -> Self

Appends an item to filters.

To override the contents of this collection use set_filters.

The filters. If using multiple filters for rules, the results include security groups for which any combination of rules - not necessarily a single rule - match all filters.

• description - The description of the security group.

• egress.ip-permission.cidr - An IPv4 CIDR block for an outbound security group rule.

• egress.ip-permission.from-port - For an outbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.

• egress.ip-permission.group-id - The ID of a security group that has been referenced in an outbound security group rule.

• egress.ip-permission.group-name - The name of a security group that is referenced in an outbound security group rule.

• egress.ip-permission.ipv6-cidr - An IPv6 CIDR block for an outbound security group rule.

• egress.ip-permission.prefix-list-id - The ID of a prefix list to which a security group rule allows outbound access.

• egress.ip-permission.protocol - The IP protocol for an outbound security group rule (tcp | udp | icmp, a protocol number, or -1 for all protocols).

• egress.ip-permission.to-port - For an outbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.

• egress.ip-permission.user-id - The ID of an Amazon Web Services account that has been referenced in an outbound security group rule.

• group-id - The ID of the security group.

• group-name - The name of the security group.

• ip-permission.cidr - An IPv4 CIDR block for an inbound security group rule.

• ip-permission.from-port - For an inbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.

• ip-permission.group-id - The ID of a security group that has been referenced in an inbound security group rule.

• ip-permission.group-name - The name of a security group that is referenced in an inbound security group rule.

• ip-permission.ipv6-cidr - An IPv6 CIDR block for an inbound security group rule.

• ip-permission.prefix-list-id - The ID of a prefix list from which a security group rule allows inbound access.

• ip-permission.protocol - The IP protocol for an inbound security group rule (tcp | udp | icmp, a protocol number, or -1 for all protocols).

• ip-permission.to-port - For an inbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.

• ip-permission.user-id - The ID of an Amazon Web Services account that has been referenced in an inbound security group rule.

• owner-id - The Amazon Web Services account ID of the owner of the security group.

• tag: - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.

• tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.

• vpc-id - The ID of the VPC specified when the security group was created.

pub fn set_filters(self, input: Option<Vec<Filter>>) -> Self

The filters. If using multiple filters for rules, the results include security groups for which any combination of rules - not necessarily a single rule - match all filters.

• description - The description of the security group.

• egress.ip-permission.cidr - An IPv4 CIDR block for an outbound security group rule.

• egress.ip-permission.from-port - For an outbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.

• egress.ip-permission.group-id - The ID of a security group that has been referenced in an outbound security group rule.

• egress.ip-permission.group-name - The name of a security group that is referenced in an outbound security group rule.

• egress.ip-permission.ipv6-cidr - An IPv6 CIDR block for an outbound security group rule.

• egress.ip-permission.prefix-list-id - The ID of a prefix list to which a security group rule allows outbound access.

• egress.ip-permission.protocol - The IP protocol for an outbound security group rule (tcp | udp | icmp, a protocol number, or -1 for all protocols).

• egress.ip-permission.to-port - For an outbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.

• egress.ip-permission.user-id - The ID of an Amazon Web Services account that has been referenced in an outbound security group rule.

• group-id - The ID of the security group.

• group-name - The name of the security group.

• ip-permission.cidr - An IPv4 CIDR block for an inbound security group rule.

• ip-permission.from-port - For an inbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.

• ip-permission.group-id - The ID of a security group that has been referenced in an inbound security group rule.

• ip-permission.group-name - The name of a security group that is referenced in an inbound security group rule.

• ip-permission.ipv6-cidr - An IPv6 CIDR block for an inbound security group rule.

• ip-permission.prefix-list-id - The ID of a prefix list from which a security group rule allows inbound access.

• ip-permission.protocol - The IP protocol for an inbound security group rule (tcp | udp | icmp, a protocol number, or -1 for all protocols).

• ip-permission.to-port - For an inbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.

• ip-permission.user-id - The ID of an Amazon Web Services account that has been referenced in an inbound security group rule.

• owner-id - The Amazon Web Services account ID of the owner of the security group.

• tag: - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.

• tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.

• vpc-id - The ID of the VPC specified when the security group was created.

pub fn get_filters(&self) -> &Option<Vec<Filter>>

The filters. If using multiple filters for rules, the results include security groups for which any combination of rules - not necessarily a single rule - match all filters.

• description - The description of the security group.

• egress.ip-permission.cidr - An IPv4 CIDR block for an outbound security group rule.

• egress.ip-permission.from-port - For an outbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.

• egress.ip-permission.group-id - The ID of a security group that has been referenced in an outbound security group rule.

• egress.ip-permission.group-name - The name of a security group that is referenced in an outbound security group rule.

• egress.ip-permission.ipv6-cidr - An IPv6 CIDR block for an outbound security group rule.

• egress.ip-permission.prefix-list-id - The ID of a prefix list to which a security group rule allows outbound access.

• egress.ip-permission.protocol - The IP protocol for an outbound security group rule (tcp | udp | icmp, a protocol number, or -1 for all protocols).

• egress.ip-permission.to-port - For an outbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.

• egress.ip-permission.user-id - The ID of an Amazon Web Services account that has been referenced in an outbound security group rule.

• group-id - The ID of the security group.

• group-name - The name of the security group.

• ip-permission.cidr - An IPv4 CIDR block for an inbound security group rule.

• ip-permission.from-port - For an inbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.

• ip-permission.group-id - The ID of a security group that has been referenced in an inbound security group rule.

• ip-permission.group-name - The name of a security group that is referenced in an inbound security group rule.

• ip-permission.ipv6-cidr - An IPv6 CIDR block for an inbound security group rule.

• ip-permission.prefix-list-id - The ID of a prefix list from which a security group rule allows inbound access.

• ip-permission.protocol - The IP protocol for an inbound security group rule (tcp | udp | icmp, a protocol number, or -1 for all protocols).

• ip-permission.to-port - For an inbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.

• ip-permission.user-id - The ID of an Amazon Web Services account that has been referenced in an inbound security group rule.

• owner-id - The Amazon Web Services account ID of the owner of the security group.

• tag: - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.

• tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.

• vpc-id - The ID of the VPC specified when the security group was created.

pub fn group_ids(self, input: impl Into<String>) -> Self

Appends an item to group_ids.

To override the contents of this collection use set_group_ids.

The IDs of the security groups. Required for security groups in a nondefault VPC.

Default: Describes all of your security groups.

pub fn set_group_ids(self, input: Option<Vec<String>>) -> Self

The IDs of the security groups. Required for security groups in a nondefault VPC.

Default: Describes all of your security groups.

pub fn get_group_ids(&self) -> &Option<Vec<String>>

The IDs of the security groups. Required for security groups in a nondefault VPC.

Default: Describes all of your security groups.

pub fn group_names(self, input: impl Into<String>) -> Self

Appends an item to group_names.

To override the contents of this collection use set_group_names.

[Default VPC] The names of the security groups. You can specify either the security group name or the security group ID.

Default: Describes all of your security groups.

pub fn set_group_names(self, input: Option<Vec<String>>) -> Self

[Default VPC] The names of the security groups. You can specify either the security group name or the security group ID.

Default: Describes all of your security groups.

pub fn get_group_names(&self) -> &Option<Vec<String>>

[Default VPC] The names of the security groups. You can specify either the security group name or the security group ID.

Default: Describes all of your security groups.

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn get_dry_run(&self) -> &Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn next_token(self, input: impl Into<String>) -> Self

The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.

pub fn set_next_token(self, input: Option<String>) -> Self

The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.

pub fn get_next_token(&self) -> &Option<String>

The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.

pub fn max_results(self, input: i32) -> Self

The maximum number of items to return for this request. To get the next page of items, make another request with the token returned in the output. This value can be between 5 and 1000. If this parameter is not specified, then all items are returned. For more information, see Pagination.

pub fn set_max_results(self, input: Option<i32>) -> Self

The maximum number of items to return for this request. To get the next page of items, make another request with the token returned in the output. This value can be between 5 and 1000. If this parameter is not specified, then all items are returned. For more information, see Pagination.

pub fn get_max_results(&self) -> &Option<i32>

The maximum number of items to return for this request. To get the next page of items, make another request with the token returned in the output. This value can be between 5 and 1000. If this parameter is not specified, then all items are returned. For more information, see Pagination.

pub fn build(self) -> Result<DescribeSecurityGroupsInput, BuildError>

Consumes the builder and constructs a DescribeSecurityGroupsInput.

impl DescribeSecurityGroupsInputBuilder

pub async fn send_with( self, client: &Client ) -> Result<DescribeSecurityGroupsOutput, SdkError<DescribeSecurityGroupsError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for DescribeSecurityGroupsInputBuilder

fn clone(&self) -> DescribeSecurityGroupsInputBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for DescribeSecurityGroupsInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for DescribeSecurityGroupsInputBuilder

fn default() -> DescribeSecurityGroupsInputBuilder

Returns the “default value” for a type.

impl PartialEq for DescribeSecurityGroupsInputBuilder

fn eq(&self, other: &DescribeSecurityGroupsInputBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for DescribeSecurityGroupsInputBuilder