#[non_exhaustive]pub struct DescribeInstanceAttributeOutput {Show 17 fields
pub groups: Option<Vec<GroupIdentifier>>,
pub block_device_mappings: Option<Vec<InstanceBlockDeviceMapping>>,
pub disable_api_termination: Option<AttributeBooleanValue>,
pub ena_support: Option<AttributeBooleanValue>,
pub enclave_options: Option<EnclaveOptions>,
pub ebs_optimized: Option<AttributeBooleanValue>,
pub instance_id: Option<String>,
pub instance_initiated_shutdown_behavior: Option<AttributeValue>,
pub instance_type: Option<AttributeValue>,
pub kernel_id: Option<AttributeValue>,
pub product_codes: Option<Vec<ProductCode>>,
pub ramdisk_id: Option<AttributeValue>,
pub root_device_name: Option<AttributeValue>,
pub source_dest_check: Option<AttributeBooleanValue>,
pub sriov_net_support: Option<AttributeValue>,
pub user_data: Option<AttributeValue>,
pub disable_api_stop: Option<AttributeBooleanValue>,
/* private fields */
}Expand description
Describes an instance attribute.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.groups: Option<Vec<GroupIdentifier>>The security groups associated with the instance.
block_device_mappings: Option<Vec<InstanceBlockDeviceMapping>>The block device mapping of the instance.
disable_api_termination: Option<AttributeBooleanValue>If the value is true, you can't terminate the instance through the Amazon EC2 console, CLI, or API; otherwise, you can.
ena_support: Option<AttributeBooleanValue>Indicates whether enhanced networking with ENA is enabled.
enclave_options: Option<EnclaveOptions>To enable the instance for Amazon Web Services Nitro Enclaves, set this parameter to true; otherwise, set it to false.
ebs_optimized: Option<AttributeBooleanValue>Indicates whether the instance is optimized for Amazon EBS I/O.
instance_id: Option<String>The ID of the instance.
instance_initiated_shutdown_behavior: Option<AttributeValue>Indicates whether an instance stops or terminates when you initiate shutdown from the instance (using the operating system command for system shutdown).
instance_type: Option<AttributeValue>The instance type.
kernel_id: Option<AttributeValue>The kernel ID.
product_codes: Option<Vec<ProductCode>>A list of product codes.
ramdisk_id: Option<AttributeValue>The RAM disk ID.
root_device_name: Option<AttributeValue>The device name of the root device volume (for example, /dev/sda1).
source_dest_check: Option<AttributeBooleanValue>Enable or disable source/destination checks, which ensure that the instance is either the source or the destination of any traffic that it receives. If the value is true, source/destination checks are enabled; otherwise, they are disabled. The default value is true. You must disable source/destination checks if the instance runs services such as network address translation, routing, or firewalls.
sriov_net_support: Option<AttributeValue>Indicates whether enhanced networking with the Intel 82599 Virtual Function interface is enabled.
user_data: Option<AttributeValue>The user data.
disable_api_stop: Option<AttributeBooleanValue>To enable the instance for Amazon Web Services Stop Protection, set this parameter to true; otherwise, set it to false.
Implementations§
source§impl DescribeInstanceAttributeOutput
impl DescribeInstanceAttributeOutput
sourcepub fn groups(&self) -> &[GroupIdentifier]
pub fn groups(&self) -> &[GroupIdentifier]
The security groups associated with the instance.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .groups.is_none().
sourcepub fn block_device_mappings(&self) -> &[InstanceBlockDeviceMapping]
pub fn block_device_mappings(&self) -> &[InstanceBlockDeviceMapping]
The block device mapping of the instance.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .block_device_mappings.is_none().
sourcepub fn disable_api_termination(&self) -> Option<&AttributeBooleanValue>
pub fn disable_api_termination(&self) -> Option<&AttributeBooleanValue>
If the value is true, you can't terminate the instance through the Amazon EC2 console, CLI, or API; otherwise, you can.
sourcepub fn ena_support(&self) -> Option<&AttributeBooleanValue>
pub fn ena_support(&self) -> Option<&AttributeBooleanValue>
Indicates whether enhanced networking with ENA is enabled.
sourcepub fn enclave_options(&self) -> Option<&EnclaveOptions>
pub fn enclave_options(&self) -> Option<&EnclaveOptions>
To enable the instance for Amazon Web Services Nitro Enclaves, set this parameter to true; otherwise, set it to false.
sourcepub fn ebs_optimized(&self) -> Option<&AttributeBooleanValue>
pub fn ebs_optimized(&self) -> Option<&AttributeBooleanValue>
Indicates whether the instance is optimized for Amazon EBS I/O.
sourcepub fn instance_id(&self) -> Option<&str>
pub fn instance_id(&self) -> Option<&str>
The ID of the instance.
sourcepub fn instance_initiated_shutdown_behavior(&self) -> Option<&AttributeValue>
pub fn instance_initiated_shutdown_behavior(&self) -> Option<&AttributeValue>
Indicates whether an instance stops or terminates when you initiate shutdown from the instance (using the operating system command for system shutdown).
sourcepub fn instance_type(&self) -> Option<&AttributeValue>
pub fn instance_type(&self) -> Option<&AttributeValue>
The instance type.
sourcepub fn kernel_id(&self) -> Option<&AttributeValue>
pub fn kernel_id(&self) -> Option<&AttributeValue>
The kernel ID.
sourcepub fn product_codes(&self) -> &[ProductCode]
pub fn product_codes(&self) -> &[ProductCode]
A list of product codes.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .product_codes.is_none().
sourcepub fn ramdisk_id(&self) -> Option<&AttributeValue>
pub fn ramdisk_id(&self) -> Option<&AttributeValue>
The RAM disk ID.
sourcepub fn root_device_name(&self) -> Option<&AttributeValue>
pub fn root_device_name(&self) -> Option<&AttributeValue>
The device name of the root device volume (for example, /dev/sda1).
sourcepub fn source_dest_check(&self) -> Option<&AttributeBooleanValue>
pub fn source_dest_check(&self) -> Option<&AttributeBooleanValue>
Enable or disable source/destination checks, which ensure that the instance is either the source or the destination of any traffic that it receives. If the value is true, source/destination checks are enabled; otherwise, they are disabled. The default value is true. You must disable source/destination checks if the instance runs services such as network address translation, routing, or firewalls.
sourcepub fn sriov_net_support(&self) -> Option<&AttributeValue>
pub fn sriov_net_support(&self) -> Option<&AttributeValue>
Indicates whether enhanced networking with the Intel 82599 Virtual Function interface is enabled.
sourcepub fn user_data(&self) -> Option<&AttributeValue>
pub fn user_data(&self) -> Option<&AttributeValue>
The user data.
sourcepub fn disable_api_stop(&self) -> Option<&AttributeBooleanValue>
pub fn disable_api_stop(&self) -> Option<&AttributeBooleanValue>
To enable the instance for Amazon Web Services Stop Protection, set this parameter to true; otherwise, set it to false.
source§impl DescribeInstanceAttributeOutput
impl DescribeInstanceAttributeOutput
sourcepub fn builder() -> DescribeInstanceAttributeOutputBuilder
pub fn builder() -> DescribeInstanceAttributeOutputBuilder
Creates a new builder-style object to manufacture DescribeInstanceAttributeOutput.
Trait Implementations§
source§impl Clone for DescribeInstanceAttributeOutput
impl Clone for DescribeInstanceAttributeOutput
source§fn clone(&self) -> DescribeInstanceAttributeOutput
fn clone(&self) -> DescribeInstanceAttributeOutput
1.6.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moresource§impl PartialEq for DescribeInstanceAttributeOutput
impl PartialEq for DescribeInstanceAttributeOutput
source§fn eq(&self, other: &DescribeInstanceAttributeOutput) -> bool
fn eq(&self, other: &DescribeInstanceAttributeOutput) -> bool
self and other values to be equal, and is used by ==.source§impl RequestId for DescribeInstanceAttributeOutput
impl RequestId for DescribeInstanceAttributeOutput
source§fn request_id(&self) -> Option<&str>
fn request_id(&self) -> Option<&str>
None if the service could not be reached.impl StructuralPartialEq for DescribeInstanceAttributeOutput
Auto Trait Implementations§
impl Freeze for DescribeInstanceAttributeOutput
impl RefUnwindSafe for DescribeInstanceAttributeOutput
impl Send for DescribeInstanceAttributeOutput
impl Sync for DescribeInstanceAttributeOutput
impl Unpin for DescribeInstanceAttributeOutput
impl UnwindSafe for DescribeInstanceAttributeOutput
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T> IntoEither for T
impl<T> IntoEither for T
source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moresource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moresource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);