Struct aws_sdk_ec2::operation::create_route::CreateRouteInput
source · #[non_exhaustive]pub struct CreateRouteInput {Show 16 fields
pub destination_cidr_block: Option<String>,
pub destination_ipv6_cidr_block: Option<String>,
pub destination_prefix_list_id: Option<String>,
pub dry_run: Option<bool>,
pub vpc_endpoint_id: Option<String>,
pub egress_only_internet_gateway_id: Option<String>,
pub gateway_id: Option<String>,
pub instance_id: Option<String>,
pub nat_gateway_id: Option<String>,
pub transit_gateway_id: Option<String>,
pub local_gateway_id: Option<String>,
pub carrier_gateway_id: Option<String>,
pub network_interface_id: Option<String>,
pub route_table_id: Option<String>,
pub vpc_peering_connection_id: Option<String>,
pub core_network_arn: Option<String>,
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.destination_cidr_block: Option<String>The IPv4 CIDR address block used for the destination match. Routing decisions are based on the most specific match. We modify the specified CIDR block to its canonical form; for example, if you specify 100.68.0.18/18, we modify it to 100.68.0.0/18.
destination_ipv6_cidr_block: Option<String>The IPv6 CIDR block used for the destination match. Routing decisions are based on the most specific match.
destination_prefix_list_id: Option<String>The ID of a prefix list used for the destination match.
dry_run: Option<bool>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
vpc_endpoint_id: Option<String>The ID of a VPC endpoint. Supported for Gateway Load Balancer endpoints only.
egress_only_internet_gateway_id: Option<String>\[IPv6 traffic only\] The ID of an egress-only internet gateway.
gateway_id: Option<String>The ID of an internet gateway or virtual private gateway attached to your VPC.
instance_id: Option<String>The ID of a NAT instance in your VPC. The operation fails if you specify an instance ID unless exactly one network interface is attached.
nat_gateway_id: Option<String>\[IPv4 traffic only\] The ID of a NAT gateway.
transit_gateway_id: Option<String>The ID of a transit gateway.
local_gateway_id: Option<String>The ID of the local gateway.
carrier_gateway_id: Option<String>The ID of the carrier gateway.
You can only use this option when the VPC contains a subnet which is associated with a Wavelength Zone.
network_interface_id: Option<String>The ID of a network interface.
route_table_id: Option<String>The ID of the route table for the route.
vpc_peering_connection_id: Option<String>The ID of a VPC peering connection.
core_network_arn: Option<String>The Amazon Resource Name (ARN) of the core network.
Implementations§
source§impl CreateRouteInput
impl CreateRouteInput
sourcepub fn destination_cidr_block(&self) -> Option<&str>
pub fn destination_cidr_block(&self) -> Option<&str>
The IPv4 CIDR address block used for the destination match. Routing decisions are based on the most specific match. We modify the specified CIDR block to its canonical form; for example, if you specify 100.68.0.18/18, we modify it to 100.68.0.0/18.
sourcepub fn destination_ipv6_cidr_block(&self) -> Option<&str>
pub fn destination_ipv6_cidr_block(&self) -> Option<&str>
The IPv6 CIDR block used for the destination match. Routing decisions are based on the most specific match.
sourcepub fn destination_prefix_list_id(&self) -> Option<&str>
pub fn destination_prefix_list_id(&self) -> Option<&str>
The ID of a prefix list used for the destination match.
sourcepub fn dry_run(&self) -> Option<bool>
pub fn dry_run(&self) -> Option<bool>
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
sourcepub fn vpc_endpoint_id(&self) -> Option<&str>
pub fn vpc_endpoint_id(&self) -> Option<&str>
The ID of a VPC endpoint. Supported for Gateway Load Balancer endpoints only.
sourcepub fn egress_only_internet_gateway_id(&self) -> Option<&str>
pub fn egress_only_internet_gateway_id(&self) -> Option<&str>
\[IPv6 traffic only\] The ID of an egress-only internet gateway.
sourcepub fn gateway_id(&self) -> Option<&str>
pub fn gateway_id(&self) -> Option<&str>
The ID of an internet gateway or virtual private gateway attached to your VPC.
sourcepub fn instance_id(&self) -> Option<&str>
pub fn instance_id(&self) -> Option<&str>
The ID of a NAT instance in your VPC. The operation fails if you specify an instance ID unless exactly one network interface is attached.
sourcepub fn nat_gateway_id(&self) -> Option<&str>
pub fn nat_gateway_id(&self) -> Option<&str>
\[IPv4 traffic only\] The ID of a NAT gateway.
sourcepub fn transit_gateway_id(&self) -> Option<&str>
pub fn transit_gateway_id(&self) -> Option<&str>
The ID of a transit gateway.
sourcepub fn local_gateway_id(&self) -> Option<&str>
pub fn local_gateway_id(&self) -> Option<&str>
The ID of the local gateway.
sourcepub fn carrier_gateway_id(&self) -> Option<&str>
pub fn carrier_gateway_id(&self) -> Option<&str>
The ID of the carrier gateway.
You can only use this option when the VPC contains a subnet which is associated with a Wavelength Zone.
sourcepub fn network_interface_id(&self) -> Option<&str>
pub fn network_interface_id(&self) -> Option<&str>
The ID of a network interface.
sourcepub fn route_table_id(&self) -> Option<&str>
pub fn route_table_id(&self) -> Option<&str>
The ID of the route table for the route.
sourcepub fn vpc_peering_connection_id(&self) -> Option<&str>
pub fn vpc_peering_connection_id(&self) -> Option<&str>
The ID of a VPC peering connection.
sourcepub fn core_network_arn(&self) -> Option<&str>
pub fn core_network_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the core network.
source§impl CreateRouteInput
impl CreateRouteInput
sourcepub fn builder() -> CreateRouteInputBuilder
pub fn builder() -> CreateRouteInputBuilder
Creates a new builder-style object to manufacture CreateRouteInput.
Trait Implementations§
source§impl Clone for CreateRouteInput
impl Clone for CreateRouteInput
source§fn clone(&self) -> CreateRouteInput
fn clone(&self) -> CreateRouteInput
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moresource§impl Debug for CreateRouteInput
impl Debug for CreateRouteInput
source§impl PartialEq for CreateRouteInput
impl PartialEq for CreateRouteInput
impl StructuralPartialEq for CreateRouteInput
Auto Trait Implementations§
impl Freeze for CreateRouteInput
impl RefUnwindSafe for CreateRouteInput
impl Send for CreateRouteInput
impl Sync for CreateRouteInput
impl Unpin for CreateRouteInput
impl UnwindSafe for CreateRouteInput
Blanket Implementations§
source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
source§unsafe fn clone_to_uninit(&self, dst: *mut T)
unsafe fn clone_to_uninit(&self, dst: *mut T)
clone_to_uninit)source§impl<T> Instrument for T
impl<T> Instrument for T
source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
source§impl<T> IntoEither for T
impl<T> IntoEither for T
source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moresource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moresource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightBlack.
§Example
println!("{}", value.bright_black());source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightGreen.
§Example
println!("{}", value.bright_green());source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightYellow.
§Example
println!("{}", value.bright_yellow());source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.bright_magenta());source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Returns self with the
fg()
set to
Color::BrightWhite.
§Example
println!("{}", value.bright_white());source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlack.
§Example
println!("{}", value.on_bright_black());source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightGreen.
§Example
println!("{}", value.on_bright_green());source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightYellow.
§Example
println!("{}", value.on_bright_yellow());source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightBlue.
§Example
println!("{}", value.on_bright_blue());source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightMagenta.
§Example
println!("{}", value.on_bright_magenta());source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightCyan.
§Example
println!("{}", value.on_bright_cyan());source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Returns self with the
bg()
set to
Color::BrightWhite.
§Example
println!("{}", value.on_bright_white());source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();source§fn underline(&self) -> Painted<&T>
fn underline(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::Underline.
§Example
println!("{}", value.underline());source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Returns self with the
attr()
set to
Attribute::RapidBlink.
§Example
println!("{}", value.rapid_blink());source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);