Struct aws_sdk_ec2::operation::describe_volume_status::builders::DescribeVolumeStatusFluentBuilder

source · 
pub struct DescribeVolumeStatusFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to DescribeVolumeStatus.

Describes the status of the specified volumes. Volume status provides the result of the checks performed on your volumes to determine events that can impair the performance of your volumes. The performance of a volume can be affected if an issue occurs on the volume's underlying host. If the volume's underlying host experiences a power outage or system issue, after the system is restored, there could be data inconsistencies on the volume. Volume events notify you if this occurs. Volume actions notify you if any action needs to be taken in response to the event.

The DescribeVolumeStatus operation provides the following information about the specified volumes:

Status: Reflects the current status of the volume. The possible values are ok, impaired , warning, or insufficient-data. If all checks pass, the overall status of the volume is ok. If the check fails, the overall status is impaired. If the status is insufficient-data, then the checks might still be taking place on your volume at the time. We recommend that you retry the request. For more information about volume status, see Monitor the status of your volumes in the Amazon EBS User Guide.

Events: Reflect the cause of a volume status and might require you to take action. For example, if your volume returns an impaired status, then the volume event might be potential-data-inconsistency. This means that your volume has been affected by an issue with the underlying host, has all I/O operations disabled, and might have inconsistent data.

Actions: Reflect the actions you might have to take in response to an event. For example, if the status of the volume is impaired and the volume event shows potential-data-inconsistency, then the action shows enable-volume-io. This means that you may want to enable the I/O operations for the volume by calling the EnableVolumeIO action and then check the volume for data consistency.

Volume status is based on the volume status checks, and does not reflect the volume state. Therefore, volume status does not indicate volumes in the error state (for example, when a volume is incapable of accepting I/O.)

The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order.

Implementations§

source§

impl DescribeVolumeStatusFluentBuilder

source

pub fn as_input(&self) -> &DescribeVolumeStatusInputBuilder

Access the DescribeVolumeStatus as a reference.

source

pub async fn send( self ) -> Result<DescribeVolumeStatusOutput, SdkError<DescribeVolumeStatusError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

source

pub fn customize( self ) -> CustomizableOperation<DescribeVolumeStatusOutput, DescribeVolumeStatusError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

source

pub fn into_paginator(self) -> DescribeVolumeStatusPaginator

Create a paginator for this request

Paginators are used by calling send().await which returns a PaginationStream.

source

pub fn filters(self, input: Filter) -> Self

Appends an item to Filters.

To override the contents of this collection use set_filters.

The filters.

  • action.code - The action code for the event (for example, enable-volume-io).

  • action.description - A description of the action.

  • action.event-id - The event ID associated with the action.

  • availability-zone - The Availability Zone of the instance.

  • event.description - A description of the event.

  • event.event-id - The event ID.

  • event.event-type - The event type (for io-enabled: passed | failed; for io-performance: io-performance:degraded | io-performance:severely-degraded | io-performance:stalled).

  • event.not-after - The latest end time for the event.

  • event.not-before - The earliest start time for the event.

  • volume-status.details-name - The cause for volume-status.status (io-enabled | io-performance).

  • volume-status.details-status - The status of volume-status.details-name (for io-enabled: passed | failed; for io-performance: normal | degraded | severely-degraded | stalled).

  • volume-status.status - The status of the volume (ok | impaired | warning | insufficient-data).

source

pub fn set_filters(self, input: Option<Vec<Filter>>) -> Self

The filters.

  • action.code - The action code for the event (for example, enable-volume-io).

  • action.description - A description of the action.

  • action.event-id - The event ID associated with the action.

  • availability-zone - The Availability Zone of the instance.

  • event.description - A description of the event.

  • event.event-id - The event ID.

  • event.event-type - The event type (for io-enabled: passed | failed; for io-performance: io-performance:degraded | io-performance:severely-degraded | io-performance:stalled).

  • event.not-after - The latest end time for the event.

  • event.not-before - The earliest start time for the event.

  • volume-status.details-name - The cause for volume-status.status (io-enabled | io-performance).

  • volume-status.details-status - The status of volume-status.details-name (for io-enabled: passed | failed; for io-performance: normal | degraded | severely-degraded | stalled).

  • volume-status.status - The status of the volume (ok | impaired | warning | insufficient-data).

source

pub fn get_filters(&self) -> &Option<Vec<Filter>>

The filters.

  • action.code - The action code for the event (for example, enable-volume-io).

  • action.description - A description of the action.

  • action.event-id - The event ID associated with the action.

  • availability-zone - The Availability Zone of the instance.

  • event.description - A description of the event.

  • event.event-id - The event ID.

  • event.event-type - The event type (for io-enabled: passed | failed; for io-performance: io-performance:degraded | io-performance:severely-degraded | io-performance:stalled).

  • event.not-after - The latest end time for the event.

  • event.not-before - The earliest start time for the event.

  • volume-status.details-name - The cause for volume-status.status (io-enabled | io-performance).

  • volume-status.details-status - The status of volume-status.details-name (for io-enabled: passed | failed; for io-performance: normal | degraded | severely-degraded | stalled).

  • volume-status.status - The status of the volume (ok | impaired | warning | insufficient-data).

source

pub fn max_results(self, input: i32) -> Self

The maximum number of items to return for this request. To get the next page of items, make another request with the token returned in the output. This value can be between 5 and 1,000; if the value is larger than 1,000, only 1,000 results are returned. If this parameter is not used, then all items are returned. You cannot specify this parameter and the volume IDs parameter in the same request. For more information, see Pagination.

source

pub fn set_max_results(self, input: Option<i32>) -> Self

The maximum number of items to return for this request. To get the next page of items, make another request with the token returned in the output. This value can be between 5 and 1,000; if the value is larger than 1,000, only 1,000 results are returned. If this parameter is not used, then all items are returned. You cannot specify this parameter and the volume IDs parameter in the same request. For more information, see Pagination.

source

pub fn get_max_results(&self) -> &Option<i32>

The maximum number of items to return for this request. To get the next page of items, make another request with the token returned in the output. This value can be between 5 and 1,000; if the value is larger than 1,000, only 1,000 results are returned. If this parameter is not used, then all items are returned. You cannot specify this parameter and the volume IDs parameter in the same request. For more information, see Pagination.

source

pub fn next_token(self, input: impl Into<String>) -> Self

The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.

source

pub fn set_next_token(self, input: Option<String>) -> Self

The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.

source

pub fn get_next_token(&self) -> &Option<String>

The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.

source

pub fn volume_ids(self, input: impl Into<String>) -> Self

Appends an item to VolumeIds.

To override the contents of this collection use set_volume_ids.

The IDs of the volumes.

Default: Describes all your volumes.

source

pub fn set_volume_ids(self, input: Option<Vec<String>>) -> Self

The IDs of the volumes.

Default: Describes all your volumes.

source

pub fn get_volume_ids(&self) -> &Option<Vec<String>>

The IDs of the volumes.

Default: Describes all your volumes.

source

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

source

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

source

pub fn get_dry_run(&self) -> &Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

Trait Implementations§

source§

impl Clone for DescribeVolumeStatusFluentBuilder

source§

fn clone(&self) -> DescribeVolumeStatusFluentBuilder

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for DescribeVolumeStatusFluentBuilder

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more