Struct aws_sdk_ec2::types::TunnelOption

#[non_exhaustive]
pub struct TunnelOption {

    pub outside_ip_address: Option<String>,
    pub tunnel_inside_cidr: Option<String>,
    pub tunnel_inside_ipv6_cidr: Option<String>,
    pub pre_shared_key: Option<String>,
    pub phase1_lifetime_seconds: Option<i32>,
    pub phase2_lifetime_seconds: Option<i32>,
    pub rekey_margin_time_seconds: Option<i32>,
    pub rekey_fuzz_percentage: Option<i32>,
    pub replay_window_size: Option<i32>,
    pub dpd_timeout_seconds: Option<i32>,
    pub dpd_timeout_action: Option<String>,
    pub phase1_encryption_algorithms: Option<Vec<Phase1EncryptionAlgorithmsListValue>>,
    pub phase2_encryption_algorithms: Option<Vec<Phase2EncryptionAlgorithmsListValue>>,
    pub phase1_integrity_algorithms: Option<Vec<Phase1IntegrityAlgorithmsListValue>>,
    pub phase2_integrity_algorithms: Option<Vec<Phase2IntegrityAlgorithmsListValue>>,
    pub phase1_dh_group_numbers: Option<Vec<Phase1DhGroupNumbersListValue>>,
    pub phase2_dh_group_numbers: Option<Vec<Phase2DhGroupNumbersListValue>>,
    pub ike_versions: Option<Vec<IkeVersionsListValue>>,
    pub startup_action: Option<String>,
    pub log_options: Option<VpnTunnelLogOptions>,
    pub enable_tunnel_lifecycle_control: Option<bool>,
}

The VPN tunnel options.

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

outside_ip_address: Option<String>

The external IP address of the VPN tunnel.

tunnel_inside_cidr: Option<String>

The range of inside IPv4 addresses for the tunnel.

tunnel_inside_ipv6_cidr: Option<String>

The range of inside IPv6 addresses for the tunnel.

pre_shared_key: Option<String>

The pre-shared key (PSK) to establish initial authentication between the virtual private gateway and the customer gateway.

phase1_lifetime_seconds: Option<i32>

The lifetime for phase 1 of the IKE negotiation, in seconds.

phase2_lifetime_seconds: Option<i32>

The lifetime for phase 2 of the IKE negotiation, in seconds.

rekey_margin_time_seconds: Option<i32>

The margin time, in seconds, before the phase 2 lifetime expires, during which the Amazon Web Services side of the VPN connection performs an IKE rekey.

rekey_fuzz_percentage: Option<i32>

The percentage of the rekey window determined by RekeyMarginTimeSeconds during which the rekey time is randomly selected.

replay_window_size: Option<i32>

The number of packets in an IKE replay window.

dpd_timeout_seconds: Option<i32>

The number of seconds after which a DPD timeout occurs.

dpd_timeout_action: Option<String>

The action to take after a DPD timeout occurs.

phase1_encryption_algorithms: Option<Vec<Phase1EncryptionAlgorithmsListValue>>

The permitted encryption algorithms for the VPN tunnel for phase 1 IKE negotiations.

phase2_encryption_algorithms: Option<Vec<Phase2EncryptionAlgorithmsListValue>>

The permitted encryption algorithms for the VPN tunnel for phase 2 IKE negotiations.

phase1_integrity_algorithms: Option<Vec<Phase1IntegrityAlgorithmsListValue>>

The permitted integrity algorithms for the VPN tunnel for phase 1 IKE negotiations.

phase2_integrity_algorithms: Option<Vec<Phase2IntegrityAlgorithmsListValue>>

The permitted integrity algorithms for the VPN tunnel for phase 2 IKE negotiations.

phase1_dh_group_numbers: Option<Vec<Phase1DhGroupNumbersListValue>>

The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 1 IKE negotiations.

phase2_dh_group_numbers: Option<Vec<Phase2DhGroupNumbersListValue>>

The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 2 IKE negotiations.

ike_versions: Option<Vec<IkeVersionsListValue>>

The IKE versions that are permitted for the VPN tunnel.

startup_action: Option<String>

The action to take when the establishing the VPN tunnels for a VPN connection.

log_options: Option<VpnTunnelLogOptions>

Options for logging VPN tunnel activity.

enable_tunnel_lifecycle_control: Option<bool>

Status of tunnel endpoint lifecycle control feature.

Implementations

impl TunnelOption

pub fn outside_ip_address(&self) -> Option<&str>

The external IP address of the VPN tunnel.

pub fn tunnel_inside_cidr(&self) -> Option<&str>

The range of inside IPv4 addresses for the tunnel.

pub fn tunnel_inside_ipv6_cidr(&self) -> Option<&str>

The range of inside IPv6 addresses for the tunnel.

pub fn pre_shared_key(&self) -> Option<&str>

The pre-shared key (PSK) to establish initial authentication between the virtual private gateway and the customer gateway.

pub fn phase1_lifetime_seconds(&self) -> Option<i32>

The lifetime for phase 1 of the IKE negotiation, in seconds.

pub fn phase2_lifetime_seconds(&self) -> Option<i32>

The lifetime for phase 2 of the IKE negotiation, in seconds.

pub fn rekey_margin_time_seconds(&self) -> Option<i32>

The margin time, in seconds, before the phase 2 lifetime expires, during which the Amazon Web Services side of the VPN connection performs an IKE rekey.

pub fn rekey_fuzz_percentage(&self) -> Option<i32>

The percentage of the rekey window determined by RekeyMarginTimeSeconds during which the rekey time is randomly selected.

pub fn replay_window_size(&self) -> Option<i32>

The number of packets in an IKE replay window.

pub fn dpd_timeout_seconds(&self) -> Option<i32>

The number of seconds after which a DPD timeout occurs.

pub fn dpd_timeout_action(&self) -> Option<&str>

The action to take after a DPD timeout occurs.

pub fn phase1_encryption_algorithms( &self ) -> &[Phase1EncryptionAlgorithmsListValue]

The permitted encryption algorithms for the VPN tunnel for phase 1 IKE negotiations.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .phase1_encryption_algorithms.is_none().

pub fn phase2_encryption_algorithms( &self ) -> &[Phase2EncryptionAlgorithmsListValue]

The permitted encryption algorithms for the VPN tunnel for phase 2 IKE negotiations.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .phase2_encryption_algorithms.is_none().

pub fn phase1_integrity_algorithms( &self ) -> &[Phase1IntegrityAlgorithmsListValue]

The permitted integrity algorithms for the VPN tunnel for phase 1 IKE negotiations.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .phase1_integrity_algorithms.is_none().

pub fn phase2_integrity_algorithms( &self ) -> &[Phase2IntegrityAlgorithmsListValue]

The permitted integrity algorithms for the VPN tunnel for phase 2 IKE negotiations.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .phase2_integrity_algorithms.is_none().

pub fn phase1_dh_group_numbers(&self) -> &[Phase1DhGroupNumbersListValue]

The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 1 IKE negotiations.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .phase1_dh_group_numbers.is_none().

pub fn phase2_dh_group_numbers(&self) -> &[Phase2DhGroupNumbersListValue]

The permitted Diffie-Hellman group numbers for the VPN tunnel for phase 2 IKE negotiations.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .phase2_dh_group_numbers.is_none().

pub fn ike_versions(&self) -> &[IkeVersionsListValue]

The IKE versions that are permitted for the VPN tunnel.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .ike_versions.is_none().

pub fn startup_action(&self) -> Option<&str>

The action to take when the establishing the VPN tunnels for a VPN connection.

pub fn log_options(&self) -> Option<&VpnTunnelLogOptions>

Options for logging VPN tunnel activity.

pub fn enable_tunnel_lifecycle_control(&self) -> Option<bool>

Status of tunnel endpoint lifecycle control feature.

impl TunnelOption

pub fn builder() -> TunnelOptionBuilder

Creates a new builder-style object to manufacture TunnelOption.

Trait Implementations

impl Clone for TunnelOption

fn clone(&self) -> TunnelOption

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for TunnelOption

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for TunnelOption

fn eq(&self, other: &TunnelOption) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for TunnelOption