Struct aws_sdk_ec2::types::ModifyTransitGatewayOptions

#[non_exhaustive]
pub struct ModifyTransitGatewayOptions {
    pub add_transit_gateway_cidr_blocks: Option<Vec<String>>,
    pub remove_transit_gateway_cidr_blocks: Option<Vec<String>>,
    pub vpn_ecmp_support: Option<VpnEcmpSupportValue>,
    pub dns_support: Option<DnsSupportValue>,
    pub security_group_referencing_support: Option<SecurityGroupReferencingSupportValue>,
    pub auto_accept_shared_attachments: Option<AutoAcceptSharedAttachmentsValue>,
    pub default_route_table_association: Option<DefaultRouteTableAssociationValue>,
    pub association_default_route_table_id: Option<String>,
    pub default_route_table_propagation: Option<DefaultRouteTablePropagationValue>,
    pub propagation_default_route_table_id: Option<String>,
    pub amazon_side_asn: Option<i64>,
}

The transit gateway options.

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

add_transit_gateway_cidr_blocks: Option<Vec<String>>

Adds IPv4 or IPv6 CIDR blocks for the transit gateway. Must be a size /24 CIDR block or larger for IPv4, or a size /64 CIDR block or larger for IPv6.

remove_transit_gateway_cidr_blocks: Option<Vec<String>>

Removes CIDR blocks for the transit gateway.

vpn_ecmp_support: Option<VpnEcmpSupportValue>

Enable or disable Equal Cost Multipath Protocol support.

dns_support: Option<DnsSupportValue>

Enable or disable DNS support.

security_group_referencing_support: Option<SecurityGroupReferencingSupportValue>

This parameter is in preview and may not be available for your account.

Enables you to reference a security group across VPCs attached to a transit gateway. Use this option to simplify security group management and control of instance-to-instance traffic across VPCs that are connected by transit gateway. You can also use this option to migrate from VPC peering (which was the only option that supported security group referencing) to transit gateways (which now also support security group referencing). This option is disabled by default and there are no additional costs to use this feature.

auto_accept_shared_attachments: Option<AutoAcceptSharedAttachmentsValue>

Enable or disable automatic acceptance of attachment requests.

default_route_table_association: Option<DefaultRouteTableAssociationValue>

Enable or disable automatic association with the default association route table.

association_default_route_table_id: Option<String>

The ID of the default association route table.

default_route_table_propagation: Option<DefaultRouteTablePropagationValue>

Enable or disable automatic propagation of routes to the default propagation route table.

propagation_default_route_table_id: Option<String>

The ID of the default propagation route table.

amazon_side_asn: Option<i64>

A private Autonomous System Number (ASN) for the Amazon side of a BGP session. The range is 64512 to 65534 for 16-bit ASNs and 4200000000 to 4294967294 for 32-bit ASNs.

The modify ASN operation is not allowed on a transit gateway with active BGP sessions. You must first delete all transit gateway attachments that have BGP configured prior to modifying the ASN on the transit gateway.

Implementations

impl ModifyTransitGatewayOptions

pub fn add_transit_gateway_cidr_blocks(&self) -> &[String]

Adds IPv4 or IPv6 CIDR blocks for the transit gateway. Must be a size /24 CIDR block or larger for IPv4, or a size /64 CIDR block or larger for IPv6.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .add_transit_gateway_cidr_blocks.is_none().

pub fn remove_transit_gateway_cidr_blocks(&self) -> &[String]

Removes CIDR blocks for the transit gateway.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .remove_transit_gateway_cidr_blocks.is_none().

pub fn vpn_ecmp_support(&self) -> Option<&VpnEcmpSupportValue>

Enable or disable Equal Cost Multipath Protocol support.

pub fn dns_support(&self) -> Option<&DnsSupportValue>

Enable or disable DNS support.

pub fn security_group_referencing_support( &self ) -> Option<&SecurityGroupReferencingSupportValue>

This parameter is in preview and may not be available for your account.

Enables you to reference a security group across VPCs attached to a transit gateway. Use this option to simplify security group management and control of instance-to-instance traffic across VPCs that are connected by transit gateway. You can also use this option to migrate from VPC peering (which was the only option that supported security group referencing) to transit gateways (which now also support security group referencing). This option is disabled by default and there are no additional costs to use this feature.

pub fn auto_accept_shared_attachments( &self ) -> Option<&AutoAcceptSharedAttachmentsValue>

Enable or disable automatic acceptance of attachment requests.

pub fn default_route_table_association( &self ) -> Option<&DefaultRouteTableAssociationValue>

Enable or disable automatic association with the default association route table.

pub fn association_default_route_table_id(&self) -> Option<&str>

The ID of the default association route table.

pub fn default_route_table_propagation( &self ) -> Option<&DefaultRouteTablePropagationValue>

Enable or disable automatic propagation of routes to the default propagation route table.

pub fn propagation_default_route_table_id(&self) -> Option<&str>

The ID of the default propagation route table.

pub fn amazon_side_asn(&self) -> Option<i64>

A private Autonomous System Number (ASN) for the Amazon side of a BGP session. The range is 64512 to 65534 for 16-bit ASNs and 4200000000 to 4294967294 for 32-bit ASNs.

The modify ASN operation is not allowed on a transit gateway with active BGP sessions. You must first delete all transit gateway attachments that have BGP configured prior to modifying the ASN on the transit gateway.

impl ModifyTransitGatewayOptions

pub fn builder() -> ModifyTransitGatewayOptionsBuilder

Creates a new builder-style object to manufacture ModifyTransitGatewayOptions.

Trait Implementations

impl Clone for ModifyTransitGatewayOptions

fn clone(&self) -> ModifyTransitGatewayOptions

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ModifyTransitGatewayOptions

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for ModifyTransitGatewayOptions

fn eq(&self, other: &ModifyTransitGatewayOptions) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for ModifyTransitGatewayOptions