Struct aws_sdk_ec2 :: types :: builders :: NatGatewayBuilder Copy item path

impl NatGatewayBuilder

pub fn create_time(self, input: DateTime) -> Self

The date and time the NAT gateway was created.

pub fn set_create_time(self, input: Option<DateTime>) -> Self

The date and time the NAT gateway was created.

pub fn get_create_time(&self) -> &Option<DateTime>

The date and time the NAT gateway was created.

pub fn delete_time(self, input: DateTime) -> Self

The date and time the NAT gateway was deleted, if applicable.

pub fn set_delete_time(self, input: Option<DateTime>) -> Self

The date and time the NAT gateway was deleted, if applicable.

pub fn get_delete_time(&self) -> &Option<DateTime>

The date and time the NAT gateway was deleted, if applicable.

pub fn failure_message(self, input: impl Into<String>) -> Self

If the NAT gateway could not be created, specifies the error message for the failure, that corresponds to the error code.

For InsufficientFreeAddressesInSubnet: "Subnet has insufficient free addresses to create this NAT gateway"
For Gateway.NotAttached: "Network vpc-xxxxxxxx has no Internet gateway attached"
For InvalidAllocationID.NotFound: "Elastic IP address eipalloc-xxxxxxxx could not be associated with this NAT gateway"
For Resource.AlreadyAssociated: "Elastic IP address eipalloc-xxxxxxxx is already associated"
For InternalError: "Network interface eni-xxxxxxxx, created and used internally by this NAT gateway is in an invalid state. Please try again."
For InvalidSubnetID.NotFound: "The specified subnet subnet-xxxxxxxx does not exist or could not be found."

pub fn set_failure_message(self, input: Option<String>) -> Self

If the NAT gateway could not be created, specifies the error message for the failure, that corresponds to the error code.

For InsufficientFreeAddressesInSubnet: "Subnet has insufficient free addresses to create this NAT gateway"
For Gateway.NotAttached: "Network vpc-xxxxxxxx has no Internet gateway attached"
For InvalidAllocationID.NotFound: "Elastic IP address eipalloc-xxxxxxxx could not be associated with this NAT gateway"
For Resource.AlreadyAssociated: "Elastic IP address eipalloc-xxxxxxxx is already associated"
For InternalError: "Network interface eni-xxxxxxxx, created and used internally by this NAT gateway is in an invalid state. Please try again."
For InvalidSubnetID.NotFound: "The specified subnet subnet-xxxxxxxx does not exist or could not be found."

pub fn get_failure_message(&self) -> &Option<String>

If the NAT gateway could not be created, specifies the error message for the failure, that corresponds to the error code.

For InsufficientFreeAddressesInSubnet: "Subnet has insufficient free addresses to create this NAT gateway"
For Gateway.NotAttached: "Network vpc-xxxxxxxx has no Internet gateway attached"
For InvalidAllocationID.NotFound: "Elastic IP address eipalloc-xxxxxxxx could not be associated with this NAT gateway"
For Resource.AlreadyAssociated: "Elastic IP address eipalloc-xxxxxxxx is already associated"
For InternalError: "Network interface eni-xxxxxxxx, created and used internally by this NAT gateway is in an invalid state. Please try again."
For InvalidSubnetID.NotFound: "The specified subnet subnet-xxxxxxxx does not exist or could not be found."

pub fn nat_gateway_addresses(self, input: NatGatewayAddress) -> Self

Appends an item to nat_gateway_addresses.

To override the contents of this collection use set_nat_gateway_addresses.

Information about the IP addresses and network interface associated with the NAT gateway.

pub fn set_nat_gateway_addresses( self, input: Option<Vec<NatGatewayAddress>> ) -> Self

Information about the IP addresses and network interface associated with the NAT gateway.

pub fn get_nat_gateway_addresses(&self) -> &Option<Vec<NatGatewayAddress>>

Information about the IP addresses and network interface associated with the NAT gateway.

pub fn nat_gateway_id(self, input: impl Into<String>) -> Self

The ID of the NAT gateway.

pub fn set_nat_gateway_id(self, input: Option<String>) -> Self

The ID of the NAT gateway.

pub fn get_nat_gateway_id(&self) -> &Option<String>

The ID of the NAT gateway.

pub fn provisioned_bandwidth(self, input: ProvisionedBandwidth) -> Self

Reserved. If you need to sustain traffic greater than the documented limits, contact us through the Support Center.

pub fn set_provisioned_bandwidth( self, input: Option<ProvisionedBandwidth> ) -> Self

Reserved. If you need to sustain traffic greater than the documented limits, contact us through the Support Center.

pub fn get_provisioned_bandwidth(&self) -> &Option<ProvisionedBandwidth>

Reserved. If you need to sustain traffic greater than the documented limits, contact us through the Support Center.

pub fn state(self, input: NatGatewayState) -> Self

The state of the NAT gateway.

pending: The NAT gateway is being created and is not ready to process traffic.
failed: The NAT gateway could not be created. Check the failureCode and failureMessage fields for the reason.
available: The NAT gateway is able to process traffic. This status remains until you delete the NAT gateway, and does not indicate the health of the NAT gateway.
deleting: The NAT gateway is in the process of being terminated and may still be processing traffic.
deleted: The NAT gateway has been terminated and is no longer processing traffic.

pub fn set_state(self, input: Option<NatGatewayState>) -> Self

The state of the NAT gateway.

pending: The NAT gateway is being created and is not ready to process traffic.
failed: The NAT gateway could not be created. Check the failureCode and failureMessage fields for the reason.
available: The NAT gateway is able to process traffic. This status remains until you delete the NAT gateway, and does not indicate the health of the NAT gateway.
deleting: The NAT gateway is in the process of being terminated and may still be processing traffic.
deleted: The NAT gateway has been terminated and is no longer processing traffic.

pub fn get_state(&self) -> &Option<NatGatewayState>

The state of the NAT gateway.

pending: The NAT gateway is being created and is not ready to process traffic.
failed: The NAT gateway could not be created. Check the failureCode and failureMessage fields for the reason.
available: The NAT gateway is able to process traffic. This status remains until you delete the NAT gateway, and does not indicate the health of the NAT gateway.
deleting: The NAT gateway is in the process of being terminated and may still be processing traffic.
deleted: The NAT gateway has been terminated and is no longer processing traffic.

pub fn subnet_id(self, input: impl Into<String>) -> Self

The ID of the subnet in which the NAT gateway is located.

pub fn set_subnet_id(self, input: Option<String>) -> Self

The ID of the subnet in which the NAT gateway is located.

pub fn get_subnet_id(&self) -> &Option<String>

The ID of the subnet in which the NAT gateway is located.

pub fn vpc_id(self, input: impl Into<String>) -> Self

The ID of the VPC in which the NAT gateway is located.

pub fn set_vpc_id(self, input: Option<String>) -> Self

The ID of the VPC in which the NAT gateway is located.

pub fn get_vpc_id(&self) -> &Option<String>

The ID of the VPC in which the NAT gateway is located.

pub fn tags(self, input: Tag) -> Self

Appends an item to tags.

To override the contents of this collection use set_tags.

The tags for the NAT gateway.

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

The tags for the NAT gateway.

pub fn get_tags(&self) -> &Option<Vec<Tag>>

The tags for the NAT gateway.

pub fn connectivity_type(self, input: ConnectivityType) -> Self

Indicates whether the NAT gateway supports public or private connectivity.

pub fn set_connectivity_type(self, input: Option<ConnectivityType>) -> Self

Indicates whether the NAT gateway supports public or private connectivity.

pub fn get_connectivity_type(&self) -> &Option<ConnectivityType>

Indicates whether the NAT gateway supports public or private connectivity.

pub fn build(self) -> NatGateway

Consumes the builder and constructs a NatGateway.

Trait Implementations§

impl Clone for NatGatewayBuilder

fn clone(&self) -> NatGatewayBuilder

Returns a copy of the value. Read more

1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for NatGatewayBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Default for NatGatewayBuilder

fn default() -> NatGatewayBuilder

Returns the “default value” for a type. Read more

impl PartialEq for NatGatewayBuilder

fn eq(&self, other: &NatGatewayBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for NatGatewayBuilder

Auto Trait Implementations§

impl Freeze for NatGatewayBuilder

impl RefUnwindSafe for NatGatewayBuilder

impl Send for NatGatewayBuilder

impl Sync for NatGatewayBuilder

impl Unpin for NatGatewayBuilder

impl UnwindSafe for NatGatewayBuilder

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

impl<T> Same for T

type Output = T

Should always be Self

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for T
where U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more