pub struct DisableIpamPolicyFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to DisableIpamPolicy.
Disables an IPAM policy.
An IPAM policy is a set of rules that define how public IPv4 addresses from IPAM pools are allocated to Amazon Web Services resources. Each rule maps an Amazon Web Services service to IPAM pools that the service will use to get IP addresses. A single policy can have multiple rules and be applied to multiple Amazon Web Services Regions. If the IPAM pool run out of addresses then the services fallback to Amazon-provided IP addresses. A policy can be applied to an individual Amazon Web Services account or an entity within Amazon Web Services Organizations.
Implementations§
Source§impl DisableIpamPolicyFluentBuilder
impl DisableIpamPolicyFluentBuilder
Sourcepub fn as_input(&self) -> &DisableIpamPolicyInputBuilder
pub fn as_input(&self) -> &DisableIpamPolicyInputBuilder
Access the DisableIpamPolicy as a reference.
Sourcepub async fn send(
self,
) -> Result<DisableIpamPolicyOutput, SdkError<DisableIpamPolicyError, HttpResponse>>
pub async fn send( self, ) -> Result<DisableIpamPolicyOutput, SdkError<DisableIpamPolicyError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<DisableIpamPolicyOutput, DisableIpamPolicyError, Self>
pub fn customize( self, ) -> CustomizableOperation<DisableIpamPolicyOutput, DisableIpamPolicyError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn dry_run(self, input: bool) -> Self
pub fn dry_run(self, input: bool) -> Self
A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn set_dry_run(self, input: Option<bool>) -> Self
pub fn set_dry_run(self, input: Option<bool>) -> Self
A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn get_dry_run(&self) -> &Option<bool>
pub fn get_dry_run(&self) -> &Option<bool>
A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn ipam_policy_id(self, input: impl Into<String>) -> Self
pub fn ipam_policy_id(self, input: impl Into<String>) -> Self
The ID of the IPAM policy to disable.
Sourcepub fn set_ipam_policy_id(self, input: Option<String>) -> Self
pub fn set_ipam_policy_id(self, input: Option<String>) -> Self
The ID of the IPAM policy to disable.
Sourcepub fn get_ipam_policy_id(&self) -> &Option<String>
pub fn get_ipam_policy_id(&self) -> &Option<String>
The ID of the IPAM policy to disable.
Sourcepub fn organization_target_id(self, input: impl Into<String>) -> Self
pub fn organization_target_id(self, input: impl Into<String>) -> Self
The ID of the Amazon Web Services Organizations target for which to disable the IPAM policy. This parameter is required only when IPAM is integrated with Amazon Web Services Organizations. When IPAM is not integrated with Amazon Web Services Organizations, omit this parameter and the policy will be disabled for the current account.
A target can be an individual Amazon Web Services account or an entity within an Amazon Web Services Organization to which an IPAM policy can be applied.
Sourcepub fn set_organization_target_id(self, input: Option<String>) -> Self
pub fn set_organization_target_id(self, input: Option<String>) -> Self
The ID of the Amazon Web Services Organizations target for which to disable the IPAM policy. This parameter is required only when IPAM is integrated with Amazon Web Services Organizations. When IPAM is not integrated with Amazon Web Services Organizations, omit this parameter and the policy will be disabled for the current account.
A target can be an individual Amazon Web Services account or an entity within an Amazon Web Services Organization to which an IPAM policy can be applied.
Sourcepub fn get_organization_target_id(&self) -> &Option<String>
pub fn get_organization_target_id(&self) -> &Option<String>
The ID of the Amazon Web Services Organizations target for which to disable the IPAM policy. This parameter is required only when IPAM is integrated with Amazon Web Services Organizations. When IPAM is not integrated with Amazon Web Services Organizations, omit this parameter and the policy will be disabled for the current account.
A target can be an individual Amazon Web Services account or an entity within an Amazon Web Services Organization to which an IPAM policy can be applied.
Trait Implementations§
Source§impl Clone for DisableIpamPolicyFluentBuilder
impl Clone for DisableIpamPolicyFluentBuilder
Source§fn clone(&self) -> DisableIpamPolicyFluentBuilder
fn clone(&self) -> DisableIpamPolicyFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for DisableIpamPolicyFluentBuilder
impl !RefUnwindSafe for DisableIpamPolicyFluentBuilder
impl Send for DisableIpamPolicyFluentBuilder
impl Sync for DisableIpamPolicyFluentBuilder
impl Unpin for DisableIpamPolicyFluentBuilder
impl !UnwindSafe for DisableIpamPolicyFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);