pub struct CancelSpotFleetRequestsFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CancelSpotFleetRequests.
Cancels the specified Spot Fleet requests.
After you cancel a Spot Fleet request, the Spot Fleet launches no new instances.
You must also specify whether a canceled Spot Fleet request should terminate its instances. If you choose to terminate the instances, the Spot Fleet request enters the cancelled_terminating state. Otherwise, the Spot Fleet request enters the cancelled_running state and the instances continue to run until they are interrupted or you terminate them manually.
Terminating an instance is permanent and irreversible.
After you terminate an instance, you can no longer connect to it, and it can't be recovered. All attached Amazon EBS volumes that are configured to be deleted on termination are also permanently deleted and can't be recovered. All data stored on instance store volumes is permanently lost. For more information, see How instance termination works.
Before you terminate an instance, ensure that you have backed up all data that you need to retain after the termination to persistent storage.
Restrictions
-
You can delete up to 100 fleets in a single request. If you exceed the specified number, no fleets are deleted.
Implementations§
Source§impl CancelSpotFleetRequestsFluentBuilder
impl CancelSpotFleetRequestsFluentBuilder
Sourcepub fn as_input(&self) -> &CancelSpotFleetRequestsInputBuilder
pub fn as_input(&self) -> &CancelSpotFleetRequestsInputBuilder
Access the CancelSpotFleetRequests as a reference.
Sourcepub async fn send(
self,
) -> Result<CancelSpotFleetRequestsOutput, SdkError<CancelSpotFleetRequestsError, HttpResponse>>
pub async fn send( self, ) -> Result<CancelSpotFleetRequestsOutput, SdkError<CancelSpotFleetRequestsError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CancelSpotFleetRequestsOutput, CancelSpotFleetRequestsError, Self>
pub fn customize( self, ) -> CustomizableOperation<CancelSpotFleetRequestsOutput, CancelSpotFleetRequestsError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn dry_run(self, input: bool) -> Self
pub fn dry_run(self, input: bool) -> Self
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn set_dry_run(self, input: Option<bool>) -> Self
pub fn set_dry_run(self, input: Option<bool>) -> Self
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn get_dry_run(&self) -> &Option<bool>
pub fn get_dry_run(&self) -> &Option<bool>
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn spot_fleet_request_ids(self, input: impl Into<String>) -> Self
pub fn spot_fleet_request_ids(self, input: impl Into<String>) -> Self
Appends an item to SpotFleetRequestIds.
To override the contents of this collection use set_spot_fleet_request_ids.
The IDs of the Spot Fleet requests.
Constraint: You can specify up to 100 IDs in a single request.
Sourcepub fn set_spot_fleet_request_ids(self, input: Option<Vec<String>>) -> Self
pub fn set_spot_fleet_request_ids(self, input: Option<Vec<String>>) -> Self
The IDs of the Spot Fleet requests.
Constraint: You can specify up to 100 IDs in a single request.
Sourcepub fn get_spot_fleet_request_ids(&self) -> &Option<Vec<String>>
pub fn get_spot_fleet_request_ids(&self) -> &Option<Vec<String>>
The IDs of the Spot Fleet requests.
Constraint: You can specify up to 100 IDs in a single request.
Sourcepub fn terminate_instances(self, input: bool) -> Self
pub fn terminate_instances(self, input: bool) -> Self
Indicates whether to terminate the associated instances when the Spot Fleet request is canceled. The default is to terminate the instances.
To let the instances continue to run after the Spot Fleet request is canceled, specify no-terminate-instances.
Sourcepub fn set_terminate_instances(self, input: Option<bool>) -> Self
pub fn set_terminate_instances(self, input: Option<bool>) -> Self
Indicates whether to terminate the associated instances when the Spot Fleet request is canceled. The default is to terminate the instances.
To let the instances continue to run after the Spot Fleet request is canceled, specify no-terminate-instances.
Sourcepub fn get_terminate_instances(&self) -> &Option<bool>
pub fn get_terminate_instances(&self) -> &Option<bool>
Indicates whether to terminate the associated instances when the Spot Fleet request is canceled. The default is to terminate the instances.
To let the instances continue to run after the Spot Fleet request is canceled, specify no-terminate-instances.
Trait Implementations§
Source§impl Clone for CancelSpotFleetRequestsFluentBuilder
impl Clone for CancelSpotFleetRequestsFluentBuilder
Source§fn clone(&self) -> CancelSpotFleetRequestsFluentBuilder
fn clone(&self) -> CancelSpotFleetRequestsFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CancelSpotFleetRequestsFluentBuilder
impl !RefUnwindSafe for CancelSpotFleetRequestsFluentBuilder
impl Send for CancelSpotFleetRequestsFluentBuilder
impl Sync for CancelSpotFleetRequestsFluentBuilder
impl Unpin for CancelSpotFleetRequestsFluentBuilder
impl !UnwindSafe for CancelSpotFleetRequestsFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);