Struct RevokeSecurityGroupIngressInput 

#[non_exhaustive]
pub struct RevokeSecurityGroupIngressInput {
    pub cidr_ip: Option<String>,
    pub from_port: Option<i32>,
    pub group_id: Option<String>,
    pub group_name: Option<String>,
    pub ip_permissions: Option<Vec<IpPermission>>,
    pub ip_protocol: Option<String>,
    pub source_security_group_name: Option<String>,
    pub source_security_group_owner_id: Option<String>,
    pub to_port: Option<i32>,
    pub security_group_rule_ids: Option<Vec<String>>,
    pub dry_run: Option<bool>,
}

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

cidr_ip: Option<String>

The CIDR IP address range. You can't specify this parameter when specifying a source security group.

from_port: Option<i32>

If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP, this is the ICMP type or -1 (all ICMP types).

group_id: Option<String>

The ID of the security group.

group_name: Option<String>

\[Default VPC\] The name of the security group. You must specify either the security group ID or the security group name in the request. For security groups in a nondefault VPC, you must specify the security group ID.

ip_permissions: Option<Vec<IpPermission>>

The sets of IP permissions. You can't specify a source security group and a CIDR IP address range in the same set of permissions.

ip_protocol: Option<String>

The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers). Use -1 to specify all.

source_security_group_name: Option<String>

\[Default VPC\] The name of the source security group. You can't specify this parameter in combination with the following parameters: the CIDR IP address range, the start of the port range, the IP protocol, and the end of the port range. The source security group must be in the same VPC. To revoke a specific rule for an IP protocol and port range, use a set of IP permissions instead.

source_security_group_owner_id: Option<String>

Not supported.

to_port: Option<i32>

If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP, this is the ICMP code or -1 (all ICMP codes).

security_group_rule_ids: Option<Vec<String>>

The IDs of the security group rules.

dry_run: Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

Implementations

impl RevokeSecurityGroupIngressInput

pub fn cidr_ip(&self) -> Option<&str>

The CIDR IP address range. You can't specify this parameter when specifying a source security group.

pub fn from_port(&self) -> Option<i32>

If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP, this is the ICMP type or -1 (all ICMP types).

pub fn group_id(&self) -> Option<&str>

The ID of the security group.

pub fn group_name(&self) -> Option<&str>

\[Default VPC\] The name of the security group. You must specify either the security group ID or the security group name in the request. For security groups in a nondefault VPC, you must specify the security group ID.

pub fn ip_permissions(&self) -> &[IpPermission]

The sets of IP permissions. You can't specify a source security group and a CIDR IP address range in the same set of permissions.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .ip_permissions.is_none().

pub fn ip_protocol(&self) -> Option<&str>

The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers). Use -1 to specify all.

pub fn source_security_group_name(&self) -> Option<&str>

\[Default VPC\] The name of the source security group. You can't specify this parameter in combination with the following parameters: the CIDR IP address range, the start of the port range, the IP protocol, and the end of the port range. The source security group must be in the same VPC. To revoke a specific rule for an IP protocol and port range, use a set of IP permissions instead.

pub fn source_security_group_owner_id(&self) -> Option<&str>

Not supported.

pub fn to_port(&self) -> Option<i32>

If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP, this is the ICMP code or -1 (all ICMP codes).

pub fn security_group_rule_ids(&self) -> &[String]

The IDs of the security group rules.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .security_group_rule_ids.is_none().

pub fn dry_run(&self) -> Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

impl RevokeSecurityGroupIngressInput

pub fn builder() -> RevokeSecurityGroupIngressInputBuilder

Creates a new builder-style object to manufacture RevokeSecurityGroupIngressInput.

Trait Implementations

impl Clone for RevokeSecurityGroupIngressInput

fn clone(&self) -> RevokeSecurityGroupIngressInput

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for RevokeSecurityGroupIngressInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for RevokeSecurityGroupIngressInput

fn eq(&self, other: &RevokeSecurityGroupIngressInput) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for RevokeSecurityGroupIngressInput