pub struct ModifyInstanceConnectEndpointFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to ModifyInstanceConnectEndpoint.
Modifies the specified EC2 Instance Connect Endpoint.
For more information, see Modify an EC2 Instance Connect Endpoint in the Amazon EC2 User Guide.
Implementations§
Source§impl ModifyInstanceConnectEndpointFluentBuilder
impl ModifyInstanceConnectEndpointFluentBuilder
Sourcepub fn as_input(&self) -> &ModifyInstanceConnectEndpointInputBuilder
pub fn as_input(&self) -> &ModifyInstanceConnectEndpointInputBuilder
Access the ModifyInstanceConnectEndpoint as a reference.
Sourcepub async fn send(
self,
) -> Result<ModifyInstanceConnectEndpointOutput, SdkError<ModifyInstanceConnectEndpointError, HttpResponse>>
pub async fn send( self, ) -> Result<ModifyInstanceConnectEndpointOutput, SdkError<ModifyInstanceConnectEndpointError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<ModifyInstanceConnectEndpointOutput, ModifyInstanceConnectEndpointError, Self>
pub fn customize( self, ) -> CustomizableOperation<ModifyInstanceConnectEndpointOutput, ModifyInstanceConnectEndpointError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn dry_run(self, input: bool) -> Self
pub fn dry_run(self, input: bool) -> Self
Checks whether you have the required permissions for the operation, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn set_dry_run(self, input: Option<bool>) -> Self
pub fn set_dry_run(self, input: Option<bool>) -> Self
Checks whether you have the required permissions for the operation, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn get_dry_run(&self) -> &Option<bool>
pub fn get_dry_run(&self) -> &Option<bool>
Checks whether you have the required permissions for the operation, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn instance_connect_endpoint_id(self, input: impl Into<String>) -> Self
pub fn instance_connect_endpoint_id(self, input: impl Into<String>) -> Self
The ID of the EC2 Instance Connect Endpoint to modify.
Sourcepub fn set_instance_connect_endpoint_id(self, input: Option<String>) -> Self
pub fn set_instance_connect_endpoint_id(self, input: Option<String>) -> Self
The ID of the EC2 Instance Connect Endpoint to modify.
Sourcepub fn get_instance_connect_endpoint_id(&self) -> &Option<String>
pub fn get_instance_connect_endpoint_id(&self) -> &Option<String>
The ID of the EC2 Instance Connect Endpoint to modify.
Sourcepub fn ip_address_type(self, input: IpAddressType) -> Self
pub fn ip_address_type(self, input: IpAddressType) -> Self
The new IP address type for the EC2 Instance Connect Endpoint.
PreserveClientIp is only supported on IPv4 EC2 Instance Connect Endpoints. To use PreserveClientIp, the value for IpAddressType must be ipv4.
Sourcepub fn set_ip_address_type(self, input: Option<IpAddressType>) -> Self
pub fn set_ip_address_type(self, input: Option<IpAddressType>) -> Self
The new IP address type for the EC2 Instance Connect Endpoint.
PreserveClientIp is only supported on IPv4 EC2 Instance Connect Endpoints. To use PreserveClientIp, the value for IpAddressType must be ipv4.
Sourcepub fn get_ip_address_type(&self) -> &Option<IpAddressType>
pub fn get_ip_address_type(&self) -> &Option<IpAddressType>
The new IP address type for the EC2 Instance Connect Endpoint.
PreserveClientIp is only supported on IPv4 EC2 Instance Connect Endpoints. To use PreserveClientIp, the value for IpAddressType must be ipv4.
Sourcepub fn security_group_ids(self, input: impl Into<String>) -> Self
pub fn security_group_ids(self, input: impl Into<String>) -> Self
Appends an item to SecurityGroupIds.
To override the contents of this collection use set_security_group_ids.
Changes the security groups for the EC2 Instance Connect Endpoint. The new set of groups you specify replaces the current set. You must specify at least one group, even if it's just the default security group in the VPC. You must specify the ID of the security group, not the name.
Sourcepub fn set_security_group_ids(self, input: Option<Vec<String>>) -> Self
pub fn set_security_group_ids(self, input: Option<Vec<String>>) -> Self
Changes the security groups for the EC2 Instance Connect Endpoint. The new set of groups you specify replaces the current set. You must specify at least one group, even if it's just the default security group in the VPC. You must specify the ID of the security group, not the name.
Sourcepub fn get_security_group_ids(&self) -> &Option<Vec<String>>
pub fn get_security_group_ids(&self) -> &Option<Vec<String>>
Changes the security groups for the EC2 Instance Connect Endpoint. The new set of groups you specify replaces the current set. You must specify at least one group, even if it's just the default security group in the VPC. You must specify the ID of the security group, not the name.
Sourcepub fn preserve_client_ip(self, input: bool) -> Self
pub fn preserve_client_ip(self, input: bool) -> Self
Indicates whether the client IP address is preserved as the source. The following are the possible values.
-
true- Use the client IP address as the source. -
false- Use the network interface IP address as the source.
PreserveClientIp=true is only supported on IPv4 EC2 Instance Connect Endpoints. If modifying PreserveClientIp to true, either the endpoint's existing IpAddressType must be ipv4, or if modifying IpAddressType in the same request, the new value must be ipv4.
Default: false
Sourcepub fn set_preserve_client_ip(self, input: Option<bool>) -> Self
pub fn set_preserve_client_ip(self, input: Option<bool>) -> Self
Indicates whether the client IP address is preserved as the source. The following are the possible values.
-
true- Use the client IP address as the source. -
false- Use the network interface IP address as the source.
PreserveClientIp=true is only supported on IPv4 EC2 Instance Connect Endpoints. If modifying PreserveClientIp to true, either the endpoint's existing IpAddressType must be ipv4, or if modifying IpAddressType in the same request, the new value must be ipv4.
Default: false
Sourcepub fn get_preserve_client_ip(&self) -> &Option<bool>
pub fn get_preserve_client_ip(&self) -> &Option<bool>
Indicates whether the client IP address is preserved as the source. The following are the possible values.
-
true- Use the client IP address as the source. -
false- Use the network interface IP address as the source.
PreserveClientIp=true is only supported on IPv4 EC2 Instance Connect Endpoints. If modifying PreserveClientIp to true, either the endpoint's existing IpAddressType must be ipv4, or if modifying IpAddressType in the same request, the new value must be ipv4.
Default: false
Trait Implementations§
Source§impl Clone for ModifyInstanceConnectEndpointFluentBuilder
impl Clone for ModifyInstanceConnectEndpointFluentBuilder
Source§fn clone(&self) -> ModifyInstanceConnectEndpointFluentBuilder
fn clone(&self) -> ModifyInstanceConnectEndpointFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for ModifyInstanceConnectEndpointFluentBuilder
impl !RefUnwindSafe for ModifyInstanceConnectEndpointFluentBuilder
impl Send for ModifyInstanceConnectEndpointFluentBuilder
impl Sync for ModifyInstanceConnectEndpointFluentBuilder
impl Unpin for ModifyInstanceConnectEndpointFluentBuilder
impl !UnwindSafe for ModifyInstanceConnectEndpointFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);