Struct AuthorizeSecurityGroupIngressInput

#[non_exhaustive]
pub struct AuthorizeSecurityGroupIngressInput {
    pub cidr_ip: Option<String>,
    pub from_port: Option<i32>,
    pub group_id: Option<String>,
    pub group_name: Option<String>,
    pub ip_permissions: Option<Vec<IpPermission>>,
    pub ip_protocol: Option<String>,
    pub source_security_group_name: Option<String>,
    pub source_security_group_owner_id: Option<String>,
    pub to_port: Option<i32>,
    pub tag_specifications: Option<Vec<TagSpecification>>,
    pub dry_run: Option<bool>,
}

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

cidr_ip: Option<String>

The IPv4 address range, in CIDR format.

Amazon Web Services canonicalizes IPv4 and IPv6 CIDRs. For example, if you specify 100.68.0.18/18 for the CIDR block, Amazon Web Services canonicalizes the CIDR block to 100.68.0.0/18. Any subsequent DescribeSecurityGroups and DescribeSecurityGroupRules calls will return the canonicalized form of the CIDR block. Additionally, if you attempt to add another rule with the non-canonical form of the CIDR (such as 100.68.0.18/18) and there is already a rule for the canonicalized form of the CIDR block (such as 100.68.0.0/18), the API throws an duplicate rule error.

To specify an IPv6 address range, use IP permissions instead.

To specify multiple rules and descriptions for the rules, use IP permissions instead.

from_port: Option<i32>

If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP, this is the ICMP type or -1 (all ICMP types).

To specify multiple rules and descriptions for the rules, use IP permissions instead.

group_id: Option<String>

The ID of the security group.

group_name: Option<String>

\[Default VPC\] The name of the security group. For security groups for a default VPC you can specify either the ID or the name of the security group. For security groups for a nondefault VPC, you must specify the ID of the security group.

ip_permissions: Option<Vec<IpPermission>>

The permissions for the security group rules.

ip_protocol: Option<String>

The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers). To specify all protocols, use -1.

To specify icmpv6, use IP permissions instead.

If you specify a protocol other than one of the supported values, traffic is allowed on all ports, regardless of any ports that you specify.

To specify multiple rules and descriptions for the rules, use IP permissions instead.

source_security_group_name: Option<String>

\[Default VPC\] The name of the source security group.

The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, specify a set of IP permissions instead.

source_security_group_owner_id: Option<String>

The Amazon Web Services account ID for the source security group, if the source security group is in a different account.

The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, use IP permissions instead.

to_port: Option<i32>

If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP, this is the ICMP code or -1 (all ICMP codes). If the start port is -1 (all ICMP types), then the end port must be -1 (all ICMP codes).

To specify multiple rules and descriptions for the rules, use IP permissions instead.

tag_specifications: Option<Vec<TagSpecification>>

The tags applied to the security group rule.

dry_run: Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

Implementations

impl AuthorizeSecurityGroupIngressInput

pub fn cidr_ip(&self) -> Option<&str>

The IPv4 address range, in CIDR format.

Amazon Web Services canonicalizes IPv4 and IPv6 CIDRs. For example, if you specify 100.68.0.18/18 for the CIDR block, Amazon Web Services canonicalizes the CIDR block to 100.68.0.0/18. Any subsequent DescribeSecurityGroups and DescribeSecurityGroupRules calls will return the canonicalized form of the CIDR block. Additionally, if you attempt to add another rule with the non-canonical form of the CIDR (such as 100.68.0.18/18) and there is already a rule for the canonicalized form of the CIDR block (such as 100.68.0.0/18), the API throws an duplicate rule error.

To specify an IPv6 address range, use IP permissions instead.

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn from_port(&self) -> Option<i32>

If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP, this is the ICMP type or -1 (all ICMP types).

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn group_id(&self) -> Option<&str>

The ID of the security group.

pub fn group_name(&self) -> Option<&str>

\[Default VPC\] The name of the security group. For security groups for a default VPC you can specify either the ID or the name of the security group. For security groups for a nondefault VPC, you must specify the ID of the security group.

pub fn ip_permissions(&self) -> &[IpPermission]

The permissions for the security group rules.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .ip_permissions.is_none().

pub fn ip_protocol(&self) -> Option<&str>

The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers). To specify all protocols, use -1.

To specify icmpv6, use IP permissions instead.

If you specify a protocol other than one of the supported values, traffic is allowed on all ports, regardless of any ports that you specify.

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn source_security_group_name(&self) -> Option<&str>

\[Default VPC\] The name of the source security group.

The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, specify a set of IP permissions instead.

pub fn source_security_group_owner_id(&self) -> Option<&str>

The Amazon Web Services account ID for the source security group, if the source security group is in a different account.

The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, use IP permissions instead.

pub fn to_port(&self) -> Option<i32>

If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP, this is the ICMP code or -1 (all ICMP codes). If the start port is -1 (all ICMP types), then the end port must be -1 (all ICMP codes).

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn tag_specifications(&self) -> &[TagSpecification]

The tags applied to the security group rule.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tag_specifications.is_none().

pub fn dry_run(&self) -> Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

impl AuthorizeSecurityGroupIngressInput

pub fn builder() -> AuthorizeSecurityGroupIngressInputBuilder

Creates a new builder-style object to manufacture AuthorizeSecurityGroupIngressInput.

Trait Implementations

impl Clone for AuthorizeSecurityGroupIngressInput

fn clone(&self) -> AuthorizeSecurityGroupIngressInput

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for AuthorizeSecurityGroupIngressInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for AuthorizeSecurityGroupIngressInput

fn eq(&self, other: &AuthorizeSecurityGroupIngressInput) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for AuthorizeSecurityGroupIngressInput