pub struct AssignIpv6AddressesFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to AssignIpv6Addresses.
Assigns the specified IPv6 addresses to the specified network interface. You can specify specific IPv6 addresses, or you can specify the number of IPv6 addresses to be automatically assigned from the subnet's IPv6 CIDR block range. You can assign as many IPv6 addresses to a network interface as you can assign private IPv4 addresses, and the limit varies by instance type.
You must specify either the IPv6 addresses or the IPv6 address count in the request.
You can optionally use Prefix Delegation on the network interface. You must specify either the IPV6 Prefix Delegation prefixes, or the IPv6 Prefix Delegation count. For information, see Assigning prefixes to network interfaces in the Amazon EC2 User Guide.
Implementations§
Source§impl AssignIpv6AddressesFluentBuilder
impl AssignIpv6AddressesFluentBuilder
Sourcepub fn as_input(&self) -> &AssignIpv6AddressesInputBuilder
pub fn as_input(&self) -> &AssignIpv6AddressesInputBuilder
Access the AssignIpv6Addresses as a reference.
Sourcepub async fn send(
self,
) -> Result<AssignIpv6AddressesOutput, SdkError<AssignIpv6AddressesError, HttpResponse>>
pub async fn send( self, ) -> Result<AssignIpv6AddressesOutput, SdkError<AssignIpv6AddressesError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<AssignIpv6AddressesOutput, AssignIpv6AddressesError, Self>
pub fn customize( self, ) -> CustomizableOperation<AssignIpv6AddressesOutput, AssignIpv6AddressesError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn ipv6_prefix_count(self, input: i32) -> Self
pub fn ipv6_prefix_count(self, input: i32) -> Self
The number of IPv6 prefixes that Amazon Web Services automatically assigns to the network interface. You cannot use this option if you use the Ipv6Prefixes option.
Sourcepub fn set_ipv6_prefix_count(self, input: Option<i32>) -> Self
pub fn set_ipv6_prefix_count(self, input: Option<i32>) -> Self
The number of IPv6 prefixes that Amazon Web Services automatically assigns to the network interface. You cannot use this option if you use the Ipv6Prefixes option.
Sourcepub fn get_ipv6_prefix_count(&self) -> &Option<i32>
pub fn get_ipv6_prefix_count(&self) -> &Option<i32>
The number of IPv6 prefixes that Amazon Web Services automatically assigns to the network interface. You cannot use this option if you use the Ipv6Prefixes option.
Sourcepub fn ipv6_prefixes(self, input: impl Into<String>) -> Self
pub fn ipv6_prefixes(self, input: impl Into<String>) -> Self
Appends an item to Ipv6Prefixes.
To override the contents of this collection use set_ipv6_prefixes.
One or more IPv6 prefixes assigned to the network interface. You can't use this option if you use the Ipv6PrefixCount option.
Sourcepub fn set_ipv6_prefixes(self, input: Option<Vec<String>>) -> Self
pub fn set_ipv6_prefixes(self, input: Option<Vec<String>>) -> Self
One or more IPv6 prefixes assigned to the network interface. You can't use this option if you use the Ipv6PrefixCount option.
Sourcepub fn get_ipv6_prefixes(&self) -> &Option<Vec<String>>
pub fn get_ipv6_prefixes(&self) -> &Option<Vec<String>>
One or more IPv6 prefixes assigned to the network interface. You can't use this option if you use the Ipv6PrefixCount option.
Sourcepub fn network_interface_id(self, input: impl Into<String>) -> Self
pub fn network_interface_id(self, input: impl Into<String>) -> Self
The ID of the network interface.
Sourcepub fn set_network_interface_id(self, input: Option<String>) -> Self
pub fn set_network_interface_id(self, input: Option<String>) -> Self
The ID of the network interface.
Sourcepub fn get_network_interface_id(&self) -> &Option<String>
pub fn get_network_interface_id(&self) -> &Option<String>
The ID of the network interface.
Sourcepub fn ipv6_addresses(self, input: impl Into<String>) -> Self
pub fn ipv6_addresses(self, input: impl Into<String>) -> Self
Appends an item to Ipv6Addresses.
To override the contents of this collection use set_ipv6_addresses.
The IPv6 addresses to be assigned to the network interface. You can't use this option if you're specifying a number of IPv6 addresses.
Sourcepub fn set_ipv6_addresses(self, input: Option<Vec<String>>) -> Self
pub fn set_ipv6_addresses(self, input: Option<Vec<String>>) -> Self
The IPv6 addresses to be assigned to the network interface. You can't use this option if you're specifying a number of IPv6 addresses.
Sourcepub fn get_ipv6_addresses(&self) -> &Option<Vec<String>>
pub fn get_ipv6_addresses(&self) -> &Option<Vec<String>>
The IPv6 addresses to be assigned to the network interface. You can't use this option if you're specifying a number of IPv6 addresses.
Sourcepub fn ipv6_address_count(self, input: i32) -> Self
pub fn ipv6_address_count(self, input: i32) -> Self
The number of additional IPv6 addresses to assign to the network interface. The specified number of IPv6 addresses are assigned in addition to the existing IPv6 addresses that are already assigned to the network interface. Amazon EC2 automatically selects the IPv6 addresses from the subnet range. You can't use this option if specifying specific IPv6 addresses.
Sourcepub fn set_ipv6_address_count(self, input: Option<i32>) -> Self
pub fn set_ipv6_address_count(self, input: Option<i32>) -> Self
The number of additional IPv6 addresses to assign to the network interface. The specified number of IPv6 addresses are assigned in addition to the existing IPv6 addresses that are already assigned to the network interface. Amazon EC2 automatically selects the IPv6 addresses from the subnet range. You can't use this option if specifying specific IPv6 addresses.
Sourcepub fn get_ipv6_address_count(&self) -> &Option<i32>
pub fn get_ipv6_address_count(&self) -> &Option<i32>
The number of additional IPv6 addresses to assign to the network interface. The specified number of IPv6 addresses are assigned in addition to the existing IPv6 addresses that are already assigned to the network interface. Amazon EC2 automatically selects the IPv6 addresses from the subnet range. You can't use this option if specifying specific IPv6 addresses.
Trait Implementations§
Source§impl Clone for AssignIpv6AddressesFluentBuilder
impl Clone for AssignIpv6AddressesFluentBuilder
Source§fn clone(&self) -> AssignIpv6AddressesFluentBuilder
fn clone(&self) -> AssignIpv6AddressesFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for AssignIpv6AddressesFluentBuilder
impl !RefUnwindSafe for AssignIpv6AddressesFluentBuilder
impl Send for AssignIpv6AddressesFluentBuilder
impl Sync for AssignIpv6AddressesFluentBuilder
impl Unpin for AssignIpv6AddressesFluentBuilder
impl !UnwindSafe for AssignIpv6AddressesFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);