pub struct CreateRouteServerFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to CreateRouteServer.
Creates a new route server to manage dynamic routing in a VPC.
Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and internet gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.
Route server supports the follow route table types:
-
VPC route tables not associated with subnets
-
Subnet route tables
-
Internet gateway route tables
Route server does not support route tables associated with virtual private gateways. To propagate routes into a transit gateway route table, use Transit Gateway Connect.
For more information see Dynamic routing in your VPC with VPC Route Server in the Amazon VPC User Guide.
Implementations§
Source§impl CreateRouteServerFluentBuilder
impl CreateRouteServerFluentBuilder
Sourcepub fn as_input(&self) -> &CreateRouteServerInputBuilder
pub fn as_input(&self) -> &CreateRouteServerInputBuilder
Access the CreateRouteServer as a reference.
Sourcepub async fn send(
self,
) -> Result<CreateRouteServerOutput, SdkError<CreateRouteServerError, HttpResponse>>
pub async fn send( self, ) -> Result<CreateRouteServerOutput, SdkError<CreateRouteServerError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<CreateRouteServerOutput, CreateRouteServerError, Self>
pub fn customize( self, ) -> CustomizableOperation<CreateRouteServerOutput, CreateRouteServerError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn amazon_side_asn(self, input: i64) -> Self
pub fn amazon_side_asn(self, input: i64) -> Self
The private Autonomous System Number (ASN) for the Amazon side of the BGP session. Valid values are from 1 to 4294967295. We recommend using a private ASN in the 64512–65534 (16-bit ASN) or 4200000000–4294967294 (32-bit ASN) range.
Sourcepub fn set_amazon_side_asn(self, input: Option<i64>) -> Self
pub fn set_amazon_side_asn(self, input: Option<i64>) -> Self
The private Autonomous System Number (ASN) for the Amazon side of the BGP session. Valid values are from 1 to 4294967295. We recommend using a private ASN in the 64512–65534 (16-bit ASN) or 4200000000–4294967294 (32-bit ASN) range.
Sourcepub fn get_amazon_side_asn(&self) -> &Option<i64>
pub fn get_amazon_side_asn(&self) -> &Option<i64>
The private Autonomous System Number (ASN) for the Amazon side of the BGP session. Valid values are from 1 to 4294967295. We recommend using a private ASN in the 64512–65534 (16-bit ASN) or 4200000000–4294967294 (32-bit ASN) range.
Sourcepub fn client_token(self, input: impl Into<String>) -> Self
pub fn client_token(self, input: impl Into<String>) -> Self
Unique, case-sensitive identifier to ensure idempotency of the request.
Sourcepub fn set_client_token(self, input: Option<String>) -> Self
pub fn set_client_token(self, input: Option<String>) -> Self
Unique, case-sensitive identifier to ensure idempotency of the request.
Sourcepub fn get_client_token(&self) -> &Option<String>
pub fn get_client_token(&self) -> &Option<String>
Unique, case-sensitive identifier to ensure idempotency of the request.
Sourcepub fn dry_run(self, input: bool) -> Self
pub fn dry_run(self, input: bool) -> Self
A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn set_dry_run(self, input: Option<bool>) -> Self
pub fn set_dry_run(self, input: Option<bool>) -> Self
A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn get_dry_run(&self) -> &Option<bool>
pub fn get_dry_run(&self) -> &Option<bool>
A check for whether you have the required permissions for the action without actually making the request and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn persist_routes(self, input: RouteServerPersistRoutesAction) -> Self
pub fn persist_routes(self, input: RouteServerPersistRoutesAction) -> Self
Indicates whether routes should be persisted after all BGP sessions are terminated.
Sourcepub fn set_persist_routes(
self,
input: Option<RouteServerPersistRoutesAction>,
) -> Self
pub fn set_persist_routes( self, input: Option<RouteServerPersistRoutesAction>, ) -> Self
Indicates whether routes should be persisted after all BGP sessions are terminated.
Sourcepub fn get_persist_routes(&self) -> &Option<RouteServerPersistRoutesAction>
pub fn get_persist_routes(&self) -> &Option<RouteServerPersistRoutesAction>
Indicates whether routes should be persisted after all BGP sessions are terminated.
Sourcepub fn persist_routes_duration(self, input: i64) -> Self
pub fn persist_routes_duration(self, input: i64) -> Self
The number of minutes a route server will wait after BGP is re-established to unpersist the routes in the FIB and RIB. Value must be in the range of 1-5. Required if PersistRoutes is enabled.
If you set the duration to 1 minute, then when your network appliance re-establishes BGP with route server, it has 1 minute to relearn it's adjacent network and advertise those routes to route server before route server resumes normal functionality. In most cases, 1 minute is probably sufficient. If, however, you have concerns that your BGP network may not be capable of fully re-establishing and re-learning everything in 1 minute, you can increase the duration up to 5 minutes.
Sourcepub fn set_persist_routes_duration(self, input: Option<i64>) -> Self
pub fn set_persist_routes_duration(self, input: Option<i64>) -> Self
The number of minutes a route server will wait after BGP is re-established to unpersist the routes in the FIB and RIB. Value must be in the range of 1-5. Required if PersistRoutes is enabled.
If you set the duration to 1 minute, then when your network appliance re-establishes BGP with route server, it has 1 minute to relearn it's adjacent network and advertise those routes to route server before route server resumes normal functionality. In most cases, 1 minute is probably sufficient. If, however, you have concerns that your BGP network may not be capable of fully re-establishing and re-learning everything in 1 minute, you can increase the duration up to 5 minutes.
Sourcepub fn get_persist_routes_duration(&self) -> &Option<i64>
pub fn get_persist_routes_duration(&self) -> &Option<i64>
The number of minutes a route server will wait after BGP is re-established to unpersist the routes in the FIB and RIB. Value must be in the range of 1-5. Required if PersistRoutes is enabled.
If you set the duration to 1 minute, then when your network appliance re-establishes BGP with route server, it has 1 minute to relearn it's adjacent network and advertise those routes to route server before route server resumes normal functionality. In most cases, 1 minute is probably sufficient. If, however, you have concerns that your BGP network may not be capable of fully re-establishing and re-learning everything in 1 minute, you can increase the duration up to 5 minutes.
Sourcepub fn sns_notifications_enabled(self, input: bool) -> Self
pub fn sns_notifications_enabled(self, input: bool) -> Self
Indicates whether SNS notifications should be enabled for route server events. Enabling SNS notifications persists BGP status changes to an SNS topic provisioned by Amazon Web Services.
Sourcepub fn set_sns_notifications_enabled(self, input: Option<bool>) -> Self
pub fn set_sns_notifications_enabled(self, input: Option<bool>) -> Self
Indicates whether SNS notifications should be enabled for route server events. Enabling SNS notifications persists BGP status changes to an SNS topic provisioned by Amazon Web Services.
Sourcepub fn get_sns_notifications_enabled(&self) -> &Option<bool>
pub fn get_sns_notifications_enabled(&self) -> &Option<bool>
Indicates whether SNS notifications should be enabled for route server events. Enabling SNS notifications persists BGP status changes to an SNS topic provisioned by Amazon Web Services.
Sourcepub fn tag_specifications(self, input: TagSpecification) -> Self
pub fn tag_specifications(self, input: TagSpecification) -> Self
Appends an item to TagSpecifications.
To override the contents of this collection use set_tag_specifications.
The tags to apply to the route server during creation.
Sourcepub fn set_tag_specifications(
self,
input: Option<Vec<TagSpecification>>,
) -> Self
pub fn set_tag_specifications( self, input: Option<Vec<TagSpecification>>, ) -> Self
The tags to apply to the route server during creation.
Sourcepub fn get_tag_specifications(&self) -> &Option<Vec<TagSpecification>>
pub fn get_tag_specifications(&self) -> &Option<Vec<TagSpecification>>
The tags to apply to the route server during creation.
Trait Implementations§
Source§impl Clone for CreateRouteServerFluentBuilder
impl Clone for CreateRouteServerFluentBuilder
Source§fn clone(&self) -> CreateRouteServerFluentBuilder
fn clone(&self) -> CreateRouteServerFluentBuilder
1.0.0 · Source§const fn clone_from(&mut self, source: &Self)
const fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for CreateRouteServerFluentBuilder
impl !RefUnwindSafe for CreateRouteServerFluentBuilder
impl Send for CreateRouteServerFluentBuilder
impl Sync for CreateRouteServerFluentBuilder
impl Unpin for CreateRouteServerFluentBuilder
impl !UnwindSafe for CreateRouteServerFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);