#[non_exhaustive]pub struct CopySnapshotInput {
pub description: Option<String>,
pub destination_outpost_arn: Option<String>,
pub destination_region: Option<String>,
pub encrypted: Option<bool>,
pub kms_key_id: Option<String>,
pub presigned_url: Option<String>,
pub source_region: Option<String>,
pub source_snapshot_id: Option<String>,
pub tag_specifications: Option<Vec<TagSpecification>>,
pub completion_duration_minutes: Option<i32>,
pub dry_run: Option<bool>,
}Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.description: Option<String>A description for the EBS snapshot.
destination_outpost_arn: Option<String>The Amazon Resource Name (ARN) of the Outpost to which to copy the snapshot. Only specify this parameter when copying a snapshot from an Amazon Web Services Region to an Outpost. The snapshot must be in the Region for the destination Outpost. You cannot copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost.
For more information, see Copy snapshots from an Amazon Web Services Region to an Outpost in the Amazon EBS User Guide.
destination_region: Option<String>The destination Region to use in the PresignedUrl parameter of a snapshot copy operation. This parameter is only valid for specifying the destination Region in a PresignedUrl parameter, where it is required.
The snapshot copy is sent to the regional endpoint that you sent the HTTP request to (for example, ec2.us-east-1.amazonaws.com). With the CLI, this is specified using the --region parameter or the default Region in your Amazon Web Services configuration file.
encrypted: Option<bool>To encrypt a copy of an unencrypted snapshot if encryption by default is not enabled, enable encryption using this parameter. Otherwise, omit this parameter. Encrypted snapshots are encrypted, even if you omit this parameter and encryption by default is not enabled. You cannot set this parameter to false. For more information, see Amazon EBS encryption in the Amazon EBS User Guide.
kms_key_id: Option<String>The identifier of the KMS key to use for Amazon EBS encryption. If this parameter is not specified, your KMS key for Amazon EBS is used. If KmsKeyId is specified, the encrypted state must be true.
You can specify the KMS key using any of the following:
-
Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.
-
Key alias. For example, alias/ExampleAlias.
-
Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.
-
Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.
Amazon Web Services authenticates the KMS key asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails.
presigned_url: Option<String>When you copy an encrypted source snapshot using the Amazon EC2 Query API, you must supply a pre-signed URL. This parameter is optional for unencrypted snapshots. For more information, see Query requests.
The PresignedUrl should use the snapshot source endpoint, the CopySnapshot action, and include the SourceRegion, SourceSnapshotId, and DestinationRegion parameters. The PresignedUrl must be signed using Amazon Web Services Signature Version 4. Because EBS snapshots are stored in Amazon S3, the signing algorithm for this parameter uses the same logic that is described in Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) in the Amazon S3 API Reference. An invalid or improperly signed PresignedUrl will cause the copy operation to fail asynchronously, and the snapshot will move to an error state.
source_region: Option<String>The ID of the Region that contains the snapshot to be copied.
source_snapshot_id: Option<String>The ID of the EBS snapshot to copy.
tag_specifications: Option<Vec<TagSpecification>>The tags to apply to the new snapshot.
completion_duration_minutes: Option<i32>Specify a completion duration, in 15 minute increments, to initiate a time-based snapshot copy. Time-based snapshot copy operations complete within the specified duration. For more information, see Time-based copies.
If you do not specify a value, the snapshot copy operation is completed on a best-effort basis.
dry_run: Option<bool>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Implementations§
Source§impl CopySnapshotInput
impl CopySnapshotInput
Sourcepub fn description(&self) -> Option<&str>
pub fn description(&self) -> Option<&str>
A description for the EBS snapshot.
Sourcepub fn destination_outpost_arn(&self) -> Option<&str>
pub fn destination_outpost_arn(&self) -> Option<&str>
The Amazon Resource Name (ARN) of the Outpost to which to copy the snapshot. Only specify this parameter when copying a snapshot from an Amazon Web Services Region to an Outpost. The snapshot must be in the Region for the destination Outpost. You cannot copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost.
For more information, see Copy snapshots from an Amazon Web Services Region to an Outpost in the Amazon EBS User Guide.
Sourcepub fn destination_region(&self) -> Option<&str>
pub fn destination_region(&self) -> Option<&str>
The destination Region to use in the PresignedUrl parameter of a snapshot copy operation. This parameter is only valid for specifying the destination Region in a PresignedUrl parameter, where it is required.
The snapshot copy is sent to the regional endpoint that you sent the HTTP request to (for example, ec2.us-east-1.amazonaws.com). With the CLI, this is specified using the --region parameter or the default Region in your Amazon Web Services configuration file.
Sourcepub fn encrypted(&self) -> Option<bool>
pub fn encrypted(&self) -> Option<bool>
To encrypt a copy of an unencrypted snapshot if encryption by default is not enabled, enable encryption using this parameter. Otherwise, omit this parameter. Encrypted snapshots are encrypted, even if you omit this parameter and encryption by default is not enabled. You cannot set this parameter to false. For more information, see Amazon EBS encryption in the Amazon EBS User Guide.
Sourcepub fn kms_key_id(&self) -> Option<&str>
pub fn kms_key_id(&self) -> Option<&str>
The identifier of the KMS key to use for Amazon EBS encryption. If this parameter is not specified, your KMS key for Amazon EBS is used. If KmsKeyId is specified, the encrypted state must be true.
You can specify the KMS key using any of the following:
-
Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.
-
Key alias. For example, alias/ExampleAlias.
-
Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.
-
Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.
Amazon Web Services authenticates the KMS key asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails.
Sourcepub fn presigned_url(&self) -> Option<&str>
pub fn presigned_url(&self) -> Option<&str>
When you copy an encrypted source snapshot using the Amazon EC2 Query API, you must supply a pre-signed URL. This parameter is optional for unencrypted snapshots. For more information, see Query requests.
The PresignedUrl should use the snapshot source endpoint, the CopySnapshot action, and include the SourceRegion, SourceSnapshotId, and DestinationRegion parameters. The PresignedUrl must be signed using Amazon Web Services Signature Version 4. Because EBS snapshots are stored in Amazon S3, the signing algorithm for this parameter uses the same logic that is described in Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) in the Amazon S3 API Reference. An invalid or improperly signed PresignedUrl will cause the copy operation to fail asynchronously, and the snapshot will move to an error state.
Sourcepub fn source_region(&self) -> Option<&str>
pub fn source_region(&self) -> Option<&str>
The ID of the Region that contains the snapshot to be copied.
Sourcepub fn source_snapshot_id(&self) -> Option<&str>
pub fn source_snapshot_id(&self) -> Option<&str>
The ID of the EBS snapshot to copy.
Sourcepub fn tag_specifications(&self) -> &[TagSpecification]
pub fn tag_specifications(&self) -> &[TagSpecification]
The tags to apply to the new snapshot.
If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tag_specifications.is_none().
Sourcepub fn completion_duration_minutes(&self) -> Option<i32>
pub fn completion_duration_minutes(&self) -> Option<i32>
Specify a completion duration, in 15 minute increments, to initiate a time-based snapshot copy. Time-based snapshot copy operations complete within the specified duration. For more information, see Time-based copies.
If you do not specify a value, the snapshot copy operation is completed on a best-effort basis.
Source§impl CopySnapshotInput
impl CopySnapshotInput
Sourcepub fn builder() -> CopySnapshotInputBuilder
pub fn builder() -> CopySnapshotInputBuilder
Creates a new builder-style object to manufacture CopySnapshotInput.
Trait Implementations§
Source§impl Clone for CopySnapshotInput
impl Clone for CopySnapshotInput
Source§fn clone(&self) -> CopySnapshotInput
fn clone(&self) -> CopySnapshotInput
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreSource§impl Debug for CopySnapshotInput
impl Debug for CopySnapshotInput
Source§impl PartialEq for CopySnapshotInput
impl PartialEq for CopySnapshotInput
impl StructuralPartialEq for CopySnapshotInput
Auto Trait Implementations§
impl Freeze for CopySnapshotInput
impl RefUnwindSafe for CopySnapshotInput
impl Send for CopySnapshotInput
impl Sync for CopySnapshotInput
impl Unpin for CopySnapshotInput
impl UnwindSafe for CopySnapshotInput
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);