pub struct AuthorizeSecurityGroupEgressFluentBuilder { /* private fields */ }Expand description
Fluent builder constructing a request to AuthorizeSecurityGroupEgress.
Adds the specified outbound (egress) rules to a security group.
An outbound rule permits instances to send traffic to the specified IPv4 or IPv6 address ranges, the IP address ranges specified by a prefix list, or the instances that are associated with a source security group. For more information, see Security group rules.
You must specify exactly one of the following destinations: an IPv4 or IPv6 address range, a prefix list, or a security group. You must specify a protocol for each rule (for example, TCP). If the protocol is TCP or UDP, you must also specify a port or port range. If the protocol is ICMP or ICMPv6, you must also specify the ICMP type and code.
Rule changes are propagated to instances associated with the security group as quickly as possible. However, a small delay might occur.
For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide.
For information about security group quotas, see Amazon VPC quotas in the Amazon VPC User Guide.
Implementations§
Source§impl AuthorizeSecurityGroupEgressFluentBuilder
impl AuthorizeSecurityGroupEgressFluentBuilder
Sourcepub fn as_input(&self) -> &AuthorizeSecurityGroupEgressInputBuilder
pub fn as_input(&self) -> &AuthorizeSecurityGroupEgressInputBuilder
Access the AuthorizeSecurityGroupEgress as a reference.
Sourcepub async fn send(
self,
) -> Result<AuthorizeSecurityGroupEgressOutput, SdkError<AuthorizeSecurityGroupEgressError, HttpResponse>>
pub async fn send( self, ) -> Result<AuthorizeSecurityGroupEgressOutput, SdkError<AuthorizeSecurityGroupEgressError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
Sourcepub fn customize(
self,
) -> CustomizableOperation<AuthorizeSecurityGroupEgressOutput, AuthorizeSecurityGroupEgressError, Self>
pub fn customize( self, ) -> CustomizableOperation<AuthorizeSecurityGroupEgressOutput, AuthorizeSecurityGroupEgressError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
Sourcepub fn tag_specifications(self, input: TagSpecification) -> Self
pub fn tag_specifications(self, input: TagSpecification) -> Self
Appends an item to TagSpecifications.
To override the contents of this collection use set_tag_specifications.
The tags applied to the security group rule.
Sourcepub fn set_tag_specifications(
self,
input: Option<Vec<TagSpecification>>,
) -> Self
pub fn set_tag_specifications( self, input: Option<Vec<TagSpecification>>, ) -> Self
The tags applied to the security group rule.
Sourcepub fn get_tag_specifications(&self) -> &Option<Vec<TagSpecification>>
pub fn get_tag_specifications(&self) -> &Option<Vec<TagSpecification>>
The tags applied to the security group rule.
Sourcepub fn dry_run(self, input: bool) -> Self
pub fn dry_run(self, input: bool) -> Self
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn set_dry_run(self, input: Option<bool>) -> Self
pub fn set_dry_run(self, input: Option<bool>) -> Self
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn get_dry_run(&self) -> &Option<bool>
pub fn get_dry_run(&self) -> &Option<bool>
Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
Sourcepub fn set_group_id(self, input: Option<String>) -> Self
pub fn set_group_id(self, input: Option<String>) -> Self
The ID of the security group.
Sourcepub fn get_group_id(&self) -> &Option<String>
pub fn get_group_id(&self) -> &Option<String>
The ID of the security group.
Sourcepub fn source_security_group_name(self, input: impl Into<String>) -> Self
pub fn source_security_group_name(self, input: impl Into<String>) -> Self
Not supported. Use IP permissions instead.
Sourcepub fn set_source_security_group_name(self, input: Option<String>) -> Self
pub fn set_source_security_group_name(self, input: Option<String>) -> Self
Not supported. Use IP permissions instead.
Sourcepub fn get_source_security_group_name(&self) -> &Option<String>
pub fn get_source_security_group_name(&self) -> &Option<String>
Not supported. Use IP permissions instead.
Sourcepub fn source_security_group_owner_id(self, input: impl Into<String>) -> Self
pub fn source_security_group_owner_id(self, input: impl Into<String>) -> Self
Not supported. Use IP permissions instead.
Sourcepub fn set_source_security_group_owner_id(self, input: Option<String>) -> Self
pub fn set_source_security_group_owner_id(self, input: Option<String>) -> Self
Not supported. Use IP permissions instead.
Sourcepub fn get_source_security_group_owner_id(&self) -> &Option<String>
pub fn get_source_security_group_owner_id(&self) -> &Option<String>
Not supported. Use IP permissions instead.
Sourcepub fn ip_protocol(self, input: impl Into<String>) -> Self
pub fn ip_protocol(self, input: impl Into<String>) -> Self
Not supported. Use IP permissions instead.
Sourcepub fn set_ip_protocol(self, input: Option<String>) -> Self
pub fn set_ip_protocol(self, input: Option<String>) -> Self
Not supported. Use IP permissions instead.
Sourcepub fn get_ip_protocol(&self) -> &Option<String>
pub fn get_ip_protocol(&self) -> &Option<String>
Not supported. Use IP permissions instead.
Sourcepub fn set_from_port(self, input: Option<i32>) -> Self
pub fn set_from_port(self, input: Option<i32>) -> Self
Not supported. Use IP permissions instead.
Sourcepub fn get_from_port(&self) -> &Option<i32>
pub fn get_from_port(&self) -> &Option<i32>
Not supported. Use IP permissions instead.
Sourcepub fn set_to_port(self, input: Option<i32>) -> Self
pub fn set_to_port(self, input: Option<i32>) -> Self
Not supported. Use IP permissions instead.
Sourcepub fn get_to_port(&self) -> &Option<i32>
pub fn get_to_port(&self) -> &Option<i32>
Not supported. Use IP permissions instead.
Sourcepub fn cidr_ip(self, input: impl Into<String>) -> Self
pub fn cidr_ip(self, input: impl Into<String>) -> Self
Not supported. Use IP permissions instead.
Sourcepub fn set_cidr_ip(self, input: Option<String>) -> Self
pub fn set_cidr_ip(self, input: Option<String>) -> Self
Not supported. Use IP permissions instead.
Sourcepub fn get_cidr_ip(&self) -> &Option<String>
pub fn get_cidr_ip(&self) -> &Option<String>
Not supported. Use IP permissions instead.
Sourcepub fn ip_permissions(self, input: IpPermission) -> Self
pub fn ip_permissions(self, input: IpPermission) -> Self
Appends an item to IpPermissions.
To override the contents of this collection use set_ip_permissions.
The permissions for the security group rules.
Sourcepub fn set_ip_permissions(self, input: Option<Vec<IpPermission>>) -> Self
pub fn set_ip_permissions(self, input: Option<Vec<IpPermission>>) -> Self
The permissions for the security group rules.
Sourcepub fn get_ip_permissions(&self) -> &Option<Vec<IpPermission>>
pub fn get_ip_permissions(&self) -> &Option<Vec<IpPermission>>
The permissions for the security group rules.
Trait Implementations§
Source§impl Clone for AuthorizeSecurityGroupEgressFluentBuilder
impl Clone for AuthorizeSecurityGroupEgressFluentBuilder
Source§fn clone(&self) -> AuthorizeSecurityGroupEgressFluentBuilder
fn clone(&self) -> AuthorizeSecurityGroupEgressFluentBuilder
1.0.0 · Source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source. Read moreAuto Trait Implementations§
impl Freeze for AuthorizeSecurityGroupEgressFluentBuilder
impl !RefUnwindSafe for AuthorizeSecurityGroupEgressFluentBuilder
impl Send for AuthorizeSecurityGroupEgressFluentBuilder
impl Sync for AuthorizeSecurityGroupEgressFluentBuilder
impl Unpin for AuthorizeSecurityGroupEgressFluentBuilder
impl !UnwindSafe for AuthorizeSecurityGroupEgressFluentBuilder
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Source§impl<T> CloneToUninit for Twhere
T: Clone,
impl<T> CloneToUninit for Twhere
T: Clone,
Source§impl<T> Instrument for T
impl<T> Instrument for T
Source§fn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
Source§fn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left is true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
self into a Left variant of Either<Self, Self>
if into_left(&self) returns true.
Converts self into a Right variant of Either<Self, Self>
otherwise. Read moreSource§impl<T> Paint for Twhere
T: ?Sized,
impl<T> Paint for Twhere
T: ?Sized,
Source§fn fg(&self, value: Color) -> Painted<&T>
fn fg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the foreground set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like red() and
green(), which have the same functionality but are
pithier.
§Example
Set foreground color to white using fg():
use yansi::{Paint, Color};
painted.fg(Color::White);Set foreground color to white using white().
use yansi::Paint;
painted.white();Source§fn bright_black(&self) -> Painted<&T>
fn bright_black(&self) -> Painted<&T>
Source§fn bright_red(&self) -> Painted<&T>
fn bright_red(&self) -> Painted<&T>
Source§fn bright_green(&self) -> Painted<&T>
fn bright_green(&self) -> Painted<&T>
Source§fn bright_yellow(&self) -> Painted<&T>
fn bright_yellow(&self) -> Painted<&T>
Source§fn bright_blue(&self) -> Painted<&T>
fn bright_blue(&self) -> Painted<&T>
Source§fn bright_magenta(&self) -> Painted<&T>
fn bright_magenta(&self) -> Painted<&T>
Source§fn bright_cyan(&self) -> Painted<&T>
fn bright_cyan(&self) -> Painted<&T>
Source§fn bright_white(&self) -> Painted<&T>
fn bright_white(&self) -> Painted<&T>
Source§fn bg(&self, value: Color) -> Painted<&T>
fn bg(&self, value: Color) -> Painted<&T>
Returns a styled value derived from self with the background set to
value.
This method should be used rarely. Instead, prefer to use color-specific
builder methods like on_red() and
on_green(), which have the same functionality but
are pithier.
§Example
Set background color to red using fg():
use yansi::{Paint, Color};
painted.bg(Color::Red);Set background color to red using on_red().
use yansi::Paint;
painted.on_red();Source§fn on_primary(&self) -> Painted<&T>
fn on_primary(&self) -> Painted<&T>
Source§fn on_magenta(&self) -> Painted<&T>
fn on_magenta(&self) -> Painted<&T>
Source§fn on_bright_black(&self) -> Painted<&T>
fn on_bright_black(&self) -> Painted<&T>
Source§fn on_bright_red(&self) -> Painted<&T>
fn on_bright_red(&self) -> Painted<&T>
Source§fn on_bright_green(&self) -> Painted<&T>
fn on_bright_green(&self) -> Painted<&T>
Source§fn on_bright_yellow(&self) -> Painted<&T>
fn on_bright_yellow(&self) -> Painted<&T>
Source§fn on_bright_blue(&self) -> Painted<&T>
fn on_bright_blue(&self) -> Painted<&T>
Source§fn on_bright_magenta(&self) -> Painted<&T>
fn on_bright_magenta(&self) -> Painted<&T>
Source§fn on_bright_cyan(&self) -> Painted<&T>
fn on_bright_cyan(&self) -> Painted<&T>
Source§fn on_bright_white(&self) -> Painted<&T>
fn on_bright_white(&self) -> Painted<&T>
Source§fn attr(&self, value: Attribute) -> Painted<&T>
fn attr(&self, value: Attribute) -> Painted<&T>
Enables the styling Attribute value.
This method should be used rarely. Instead, prefer to use
attribute-specific builder methods like bold() and
underline(), which have the same functionality
but are pithier.
§Example
Make text bold using attr():
use yansi::{Paint, Attribute};
painted.attr(Attribute::Bold);Make text bold using using bold().
use yansi::Paint;
painted.bold();Source§fn rapid_blink(&self) -> Painted<&T>
fn rapid_blink(&self) -> Painted<&T>
Source§fn quirk(&self, value: Quirk) -> Painted<&T>
fn quirk(&self, value: Quirk) -> Painted<&T>
Enables the yansi Quirk value.
This method should be used rarely. Instead, prefer to use quirk-specific
builder methods like mask() and
wrap(), which have the same functionality but are
pithier.
§Example
Enable wrapping using .quirk():
use yansi::{Paint, Quirk};
painted.quirk(Quirk::Wrap);Enable wrapping using wrap().
use yansi::Paint;
painted.wrap();Source§fn clear(&self) -> Painted<&T>
👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.
fn clear(&self) -> Painted<&T>
resetting() due to conflicts with Vec::clear().
The clear() method will be removed in a future release.Source§fn whenever(&self, value: Condition) -> Painted<&T>
fn whenever(&self, value: Condition) -> Painted<&T>
Conditionally enable styling based on whether the Condition value
applies. Replaces any previous condition.
See the crate level docs for more details.
§Example
Enable styling painted only when both stdout and stderr are TTYs:
use yansi::{Paint, Condition};
painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);