Struct AuthorizeSecurityGroupIngressFluentBuilder

pub struct AuthorizeSecurityGroupIngressFluentBuilder { /* private fields */ }

Fluent builder constructing a request to AuthorizeSecurityGroupIngress.

Adds the specified inbound (ingress) rules to a security group.

An inbound rule permits instances to receive traffic from the specified IPv4 or IPv6 address range, the IP address ranges that are specified by a prefix list, or the instances that are associated with a destination security group. For more information, see Security group rules.

You must specify exactly one of the following sources: an IPv4 or IPv6 address range, a prefix list, or a security group. You must specify a protocol for each rule (for example, TCP). If the protocol is TCP or UDP, you must also specify a port or port range. If the protocol is ICMP or ICMPv6, you must also specify the ICMP/ICMPv6 type and code.

Rule changes are propagated to instances associated with the security group as quickly as possible. However, a small delay might occur.

For examples of rules that you can add to security groups for specific access scenarios, see Security group rules for different use cases in the Amazon EC2 User Guide.

For more information about security group quotas, see Amazon VPC quotas in the Amazon VPC User Guide.

Implementations

impl AuthorizeSecurityGroupIngressFluentBuilder

pub fn as_input(&self) -> &AuthorizeSecurityGroupIngressInputBuilder

Access the AuthorizeSecurityGroupIngress as a reference.

pub async fn send( self, ) -> Result<AuthorizeSecurityGroupIngressOutput, SdkError<AuthorizeSecurityGroupIngressError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn customize( self, ) -> CustomizableOperation<AuthorizeSecurityGroupIngressOutput, AuthorizeSecurityGroupIngressError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn cidr_ip(self, input: impl Into<String>) -> Self

The IPv4 address range, in CIDR format.

Amazon Web Services canonicalizes IPv4 and IPv6 CIDRs. For example, if you specify 100.68.0.18/18 for the CIDR block, Amazon Web Services canonicalizes the CIDR block to 100.68.0.0/18. Any subsequent DescribeSecurityGroups and DescribeSecurityGroupRules calls will return the canonicalized form of the CIDR block. Additionally, if you attempt to add another rule with the non-canonical form of the CIDR (such as 100.68.0.18/18) and there is already a rule for the canonicalized form of the CIDR block (such as 100.68.0.0/18), the API throws an duplicate rule error.

To specify an IPv6 address range, use IP permissions instead.

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn set_cidr_ip(self, input: Option<String>) -> Self

The IPv4 address range, in CIDR format.

Amazon Web Services canonicalizes IPv4 and IPv6 CIDRs. For example, if you specify 100.68.0.18/18 for the CIDR block, Amazon Web Services canonicalizes the CIDR block to 100.68.0.0/18. Any subsequent DescribeSecurityGroups and DescribeSecurityGroupRules calls will return the canonicalized form of the CIDR block. Additionally, if you attempt to add another rule with the non-canonical form of the CIDR (such as 100.68.0.18/18) and there is already a rule for the canonicalized form of the CIDR block (such as 100.68.0.0/18), the API throws an duplicate rule error.

To specify an IPv6 address range, use IP permissions instead.

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn get_cidr_ip(&self) -> &Option<String>

The IPv4 address range, in CIDR format.

Amazon Web Services canonicalizes IPv4 and IPv6 CIDRs. For example, if you specify 100.68.0.18/18 for the CIDR block, Amazon Web Services canonicalizes the CIDR block to 100.68.0.0/18. Any subsequent DescribeSecurityGroups and DescribeSecurityGroupRules calls will return the canonicalized form of the CIDR block. Additionally, if you attempt to add another rule with the non-canonical form of the CIDR (such as 100.68.0.18/18) and there is already a rule for the canonicalized form of the CIDR block (such as 100.68.0.0/18), the API throws an duplicate rule error.

To specify an IPv6 address range, use IP permissions instead.

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn from_port(self, input: i32) -> Self

If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP, this is the ICMP type or -1 (all ICMP types).

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn set_from_port(self, input: Option<i32>) -> Self

If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP, this is the ICMP type or -1 (all ICMP types).

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn get_from_port(&self) -> &Option<i32>

If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP, this is the ICMP type or -1 (all ICMP types).

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn group_id(self, input: impl Into<String>) -> Self

The ID of the security group.

pub fn set_group_id(self, input: Option<String>) -> Self

The ID of the security group.

pub fn get_group_id(&self) -> &Option<String>

The ID of the security group.

pub fn group_name(self, input: impl Into<String>) -> Self

\[Default VPC\] The name of the security group. For security groups for a default VPC you can specify either the ID or the name of the security group. For security groups for a nondefault VPC, you must specify the ID of the security group.

pub fn set_group_name(self, input: Option<String>) -> Self

\[Default VPC\] The name of the security group. For security groups for a default VPC you can specify either the ID or the name of the security group. For security groups for a nondefault VPC, you must specify the ID of the security group.

pub fn get_group_name(&self) -> &Option<String>

\[Default VPC\] The name of the security group. For security groups for a default VPC you can specify either the ID or the name of the security group. For security groups for a nondefault VPC, you must specify the ID of the security group.

pub fn ip_permissions(self, input: IpPermission) -> Self

Appends an item to IpPermissions.

To override the contents of this collection use set_ip_permissions.

The permissions for the security group rules.

pub fn set_ip_permissions(self, input: Option<Vec<IpPermission>>) -> Self

The permissions for the security group rules.

pub fn get_ip_permissions(&self) -> &Option<Vec<IpPermission>>

The permissions for the security group rules.

pub fn ip_protocol(self, input: impl Into<String>) -> Self

The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers). To specify all protocols, use -1.

To specify icmpv6, use IP permissions instead.

If you specify a protocol other than one of the supported values, traffic is allowed on all ports, regardless of any ports that you specify.

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn set_ip_protocol(self, input: Option<String>) -> Self

The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers). To specify all protocols, use -1.

To specify icmpv6, use IP permissions instead.

If you specify a protocol other than one of the supported values, traffic is allowed on all ports, regardless of any ports that you specify.

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn get_ip_protocol(&self) -> &Option<String>

The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers). To specify all protocols, use -1.

To specify icmpv6, use IP permissions instead.

If you specify a protocol other than one of the supported values, traffic is allowed on all ports, regardless of any ports that you specify.

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn source_security_group_name(self, input: impl Into<String>) -> Self

\[Default VPC\] The name of the source security group.

The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, specify a set of IP permissions instead.

pub fn set_source_security_group_name(self, input: Option<String>) -> Self

\[Default VPC\] The name of the source security group.

The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, specify a set of IP permissions instead.

pub fn get_source_security_group_name(&self) -> &Option<String>

\[Default VPC\] The name of the source security group.

The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, specify a set of IP permissions instead.

pub fn source_security_group_owner_id(self, input: impl Into<String>) -> Self

The Amazon Web Services account ID for the source security group, if the source security group is in a different account.

The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, use IP permissions instead.

pub fn set_source_security_group_owner_id(self, input: Option<String>) -> Self

The Amazon Web Services account ID for the source security group, if the source security group is in a different account.

The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, use IP permissions instead.

pub fn get_source_security_group_owner_id(&self) -> &Option<String>

The Amazon Web Services account ID for the source security group, if the source security group is in a different account.

The rule grants full ICMP, UDP, and TCP access. To create a rule with a specific protocol and port range, use IP permissions instead.

pub fn to_port(self, input: i32) -> Self

If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP, this is the ICMP code or -1 (all ICMP codes). If the start port is -1 (all ICMP types), then the end port must be -1 (all ICMP codes).

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn set_to_port(self, input: Option<i32>) -> Self

If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP, this is the ICMP code or -1 (all ICMP codes). If the start port is -1 (all ICMP types), then the end port must be -1 (all ICMP codes).

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn get_to_port(&self) -> &Option<i32>

If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP, this is the ICMP code or -1 (all ICMP codes). If the start port is -1 (all ICMP types), then the end port must be -1 (all ICMP codes).

To specify multiple rules and descriptions for the rules, use IP permissions instead.

pub fn tag_specifications(self, input: TagSpecification) -> Self

Appends an item to TagSpecifications.

To override the contents of this collection use set_tag_specifications.

The tags applied to the security group rule.

pub fn set_tag_specifications( self, input: Option<Vec<TagSpecification>>, ) -> Self

The tags applied to the security group rule.

pub fn get_tag_specifications(&self) -> &Option<Vec<TagSpecification>>

The tags applied to the security group rule.

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn get_dry_run(&self) -> &Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

Trait Implementations

impl Clone for AuthorizeSecurityGroupIngressFluentBuilder

fn clone(&self) -> AuthorizeSecurityGroupIngressFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for AuthorizeSecurityGroupIngressFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.