Struct aws_sdk_ec2::operation::request_spot_instances::builders::RequestSpotInstancesInputBuilder

#[non_exhaustive]
pub struct RequestSpotInstancesInputBuilder { /* private fields */ }

A builder for RequestSpotInstancesInput.

Implementations

impl RequestSpotInstancesInputBuilder

pub fn availability_zone_group(self, input: impl Into<String>) -> Self

The user-specified name for a logical grouping of requests.

When you specify an Availability Zone group in a Spot Instance request, all Spot Instances in the request are launched in the same Availability Zone. Instance proximity is maintained with this parameter, but the choice of Availability Zone is not. The group applies only to requests for Spot Instances of the same instance type. Any additional Spot Instance requests that are specified with the same Availability Zone group name are launched in that same Availability Zone, as long as at least one instance from the group is still active.

If there is no active instance running in the Availability Zone group that you specify for a new Spot Instance request (all instances are terminated, the request is expired, or the maximum price you specified falls below current Spot price), then Amazon EC2 launches the instance in any Availability Zone where the constraint can be met. Consequently, the subsequent set of Spot Instances could be placed in a different zone from the original request, even if you specified the same Availability Zone group.

Default: Instances are launched in any available Availability Zone.

pub fn set_availability_zone_group(self, input: Option<String>) -> Self

The user-specified name for a logical grouping of requests.

When you specify an Availability Zone group in a Spot Instance request, all Spot Instances in the request are launched in the same Availability Zone. Instance proximity is maintained with this parameter, but the choice of Availability Zone is not. The group applies only to requests for Spot Instances of the same instance type. Any additional Spot Instance requests that are specified with the same Availability Zone group name are launched in that same Availability Zone, as long as at least one instance from the group is still active.

If there is no active instance running in the Availability Zone group that you specify for a new Spot Instance request (all instances are terminated, the request is expired, or the maximum price you specified falls below current Spot price), then Amazon EC2 launches the instance in any Availability Zone where the constraint can be met. Consequently, the subsequent set of Spot Instances could be placed in a different zone from the original request, even if you specified the same Availability Zone group.

Default: Instances are launched in any available Availability Zone.

pub fn get_availability_zone_group(&self) -> &Option<String>

The user-specified name for a logical grouping of requests.

When you specify an Availability Zone group in a Spot Instance request, all Spot Instances in the request are launched in the same Availability Zone. Instance proximity is maintained with this parameter, but the choice of Availability Zone is not. The group applies only to requests for Spot Instances of the same instance type. Any additional Spot Instance requests that are specified with the same Availability Zone group name are launched in that same Availability Zone, as long as at least one instance from the group is still active.

If there is no active instance running in the Availability Zone group that you specify for a new Spot Instance request (all instances are terminated, the request is expired, or the maximum price you specified falls below current Spot price), then Amazon EC2 launches the instance in any Availability Zone where the constraint can be met. Consequently, the subsequent set of Spot Instances could be placed in a different zone from the original request, even if you specified the same Availability Zone group.

Default: Instances are launched in any available Availability Zone.

pub fn block_duration_minutes(self, input: i32) -> Self

Deprecated.

pub fn set_block_duration_minutes(self, input: Option<i32>) -> Self

Deprecated.

pub fn get_block_duration_minutes(&self) -> &Option<i32>

Deprecated.

pub fn client_token(self, input: impl Into<String>) -> Self

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency in the Amazon EC2 User Guide for Linux Instances.

pub fn set_client_token(self, input: Option<String>) -> Self

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency in the Amazon EC2 User Guide for Linux Instances.

pub fn get_client_token(&self) -> &Option<String>

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency in the Amazon EC2 User Guide for Linux Instances.

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn get_dry_run(&self) -> &Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn instance_count(self, input: i32) -> Self

The maximum number of Spot Instances to launch.

Default: 1

pub fn set_instance_count(self, input: Option<i32>) -> Self

The maximum number of Spot Instances to launch.

Default: 1

pub fn get_instance_count(&self) -> &Option<i32>

The maximum number of Spot Instances to launch.

Default: 1

pub fn launch_group(self, input: impl Into<String>) -> Self

The instance launch group. Launch groups are Spot Instances that launch together and terminate together.

Default: Instances are launched and terminated individually

pub fn set_launch_group(self, input: Option<String>) -> Self

The instance launch group. Launch groups are Spot Instances that launch together and terminate together.

Default: Instances are launched and terminated individually

pub fn get_launch_group(&self) -> &Option<String>

The instance launch group. Launch groups are Spot Instances that launch together and terminate together.

Default: Instances are launched and terminated individually

pub fn launch_specification(self, input: RequestSpotLaunchSpecification) -> Self

The launch specification.

pub fn set_launch_specification( self, input: Option<RequestSpotLaunchSpecification> ) -> Self

The launch specification.

pub fn get_launch_specification( &self ) -> &Option<RequestSpotLaunchSpecification>

The launch specification.

pub fn spot_price(self, input: impl Into<String>) -> Self

The maximum price per unit hour that you are willing to pay for a Spot Instance. We do not recommend using this parameter because it can lead to increased interruptions. If you do not specify this parameter, you will pay the current Spot price.

If you specify a maximum price, your instances will be interrupted more frequently than if you do not specify this parameter.

pub fn set_spot_price(self, input: Option<String>) -> Self

The maximum price per unit hour that you are willing to pay for a Spot Instance. We do not recommend using this parameter because it can lead to increased interruptions. If you do not specify this parameter, you will pay the current Spot price.

If you specify a maximum price, your instances will be interrupted more frequently than if you do not specify this parameter.

pub fn get_spot_price(&self) -> &Option<String>

The maximum price per unit hour that you are willing to pay for a Spot Instance. We do not recommend using this parameter because it can lead to increased interruptions. If you do not specify this parameter, you will pay the current Spot price.

If you specify a maximum price, your instances will be interrupted more frequently than if you do not specify this parameter.

pub fn type(self, input: SpotInstanceType) -> Self

The Spot Instance request type.

Default: one-time

pub fn set_type(self, input: Option<SpotInstanceType>) -> Self

The Spot Instance request type.

Default: one-time

pub fn get_type(&self) -> &Option<SpotInstanceType>

The Spot Instance request type.

Default: one-time

pub fn valid_from(self, input: DateTime) -> Self

The start date of the request. If this is a one-time request, the request becomes active at this date and time and remains active until all instances launch, the request expires, or the request is canceled. If the request is persistent, the request becomes active at this date and time and remains active until it expires or is canceled.

The specified start date and time cannot be equal to the current date and time. You must specify a start date and time that occurs after the current date and time.

pub fn set_valid_from(self, input: Option<DateTime>) -> Self

The start date of the request. If this is a one-time request, the request becomes active at this date and time and remains active until all instances launch, the request expires, or the request is canceled. If the request is persistent, the request becomes active at this date and time and remains active until it expires or is canceled.

The specified start date and time cannot be equal to the current date and time. You must specify a start date and time that occurs after the current date and time.

pub fn get_valid_from(&self) -> &Option<DateTime>

The start date of the request. If this is a one-time request, the request becomes active at this date and time and remains active until all instances launch, the request expires, or the request is canceled. If the request is persistent, the request becomes active at this date and time and remains active until it expires or is canceled.

The specified start date and time cannot be equal to the current date and time. You must specify a start date and time that occurs after the current date and time.

pub fn valid_until(self, input: DateTime) -> Self

The end date of the request, in UTC format (YYYY-MM-DDTHH:MM:SSZ).

• For a persistent request, the request remains active until the ValidUntil date and time is reached. Otherwise, the request remains active until you cancel it.

• For a one-time request, the request remains active until all instances launch, the request is canceled, or the ValidUntil date and time is reached. By default, the request is valid for 7 days from the date the request was created.

pub fn set_valid_until(self, input: Option<DateTime>) -> Self

The end date of the request, in UTC format (YYYY-MM-DDTHH:MM:SSZ).

• For a persistent request, the request remains active until the ValidUntil date and time is reached. Otherwise, the request remains active until you cancel it.

• For a one-time request, the request remains active until all instances launch, the request is canceled, or the ValidUntil date and time is reached. By default, the request is valid for 7 days from the date the request was created.

pub fn get_valid_until(&self) -> &Option<DateTime>

The end date of the request, in UTC format (YYYY-MM-DDTHH:MM:SSZ).

• For a persistent request, the request remains active until the ValidUntil date and time is reached. Otherwise, the request remains active until you cancel it.

• For a one-time request, the request remains active until all instances launch, the request is canceled, or the ValidUntil date and time is reached. By default, the request is valid for 7 days from the date the request was created.

pub fn tag_specifications(self, input: TagSpecification) -> Self

Appends an item to tag_specifications.

To override the contents of this collection use set_tag_specifications.

The key-value pair for tagging the Spot Instance request on creation. The value for ResourceType must be spot-instances-request, otherwise the Spot Instance request fails. To tag the Spot Instance request after it has been created, see CreateTags.

pub fn set_tag_specifications( self, input: Option<Vec<TagSpecification>> ) -> Self

The key-value pair for tagging the Spot Instance request on creation. The value for ResourceType must be spot-instances-request, otherwise the Spot Instance request fails. To tag the Spot Instance request after it has been created, see CreateTags.

pub fn get_tag_specifications(&self) -> &Option<Vec<TagSpecification>>

The key-value pair for tagging the Spot Instance request on creation. The value for ResourceType must be spot-instances-request, otherwise the Spot Instance request fails. To tag the Spot Instance request after it has been created, see CreateTags.

pub fn instance_interruption_behavior( self, input: InstanceInterruptionBehavior ) -> Self

The behavior when a Spot Instance is interrupted. The default is terminate.

pub fn set_instance_interruption_behavior( self, input: Option<InstanceInterruptionBehavior> ) -> Self

The behavior when a Spot Instance is interrupted. The default is terminate.

pub fn get_instance_interruption_behavior( &self ) -> &Option<InstanceInterruptionBehavior>

The behavior when a Spot Instance is interrupted. The default is terminate.

pub fn build(self) -> Result<RequestSpotInstancesInput, BuildError>

Consumes the builder and constructs a RequestSpotInstancesInput.

impl RequestSpotInstancesInputBuilder

pub async fn send_with( self, client: &Client ) -> Result<RequestSpotInstancesOutput, SdkError<RequestSpotInstancesError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for RequestSpotInstancesInputBuilder

fn clone(&self) -> RequestSpotInstancesInputBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for RequestSpotInstancesInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for RequestSpotInstancesInputBuilder

fn default() -> RequestSpotInstancesInputBuilder

Returns the “default value” for a type.

impl PartialEq for RequestSpotInstancesInputBuilder

fn eq(&self, other: &RequestSpotInstancesInputBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for RequestSpotInstancesInputBuilder