Struct aws_sdk_ec2::operation::copy_image::builders::CopyImageFluentBuilder

pub struct CopyImageFluentBuilder { /* private fields */ }

Fluent builder constructing a request to CopyImage.

Initiates the copy of an AMI. You can copy an AMI from one Region to another, or from a Region to an Outpost. You can't copy an AMI from an Outpost to a Region, from one Outpost to another, or within the same Outpost. To copy an AMI to another partition, see CreateStoreImageTask.

To copy an AMI from one Region to another, specify the source Region using the SourceRegion parameter, and specify the destination Region using its endpoint. Copies of encrypted backing snapshots for the AMI are encrypted. Copies of unencrypted backing snapshots remain unencrypted, unless you set Encrypted during the copy operation. You cannot create an unencrypted copy of an encrypted backing snapshot.

To copy an AMI from a Region to an Outpost, specify the source Region using the SourceRegion parameter, and specify the ARN of the destination Outpost using DestinationOutpostArn. Backing snapshots copied to an Outpost are encrypted by default using the default encryption key for the Region, or a different key that you specify in the request using KmsKeyId. Outposts do not support unencrypted snapshots. For more information, Amazon EBS local snapshots on Outposts in the Amazon EC2 User Guide.

For more information about the prerequisites and limits when copying an AMI, see Copy an AMI in the Amazon EC2 User Guide.

Implementations

impl CopyImageFluentBuilder

pub fn as_input(&self) -> &CopyImageInputBuilder

Access the CopyImage as a reference.

pub async fn send( self ) -> Result<CopyImageOutput, SdkError<CopyImageError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn customize( self ) -> CustomizableOperation<CopyImageOutput, CopyImageError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn client_token(self, input: impl Into<String>) -> Self

Unique, case-sensitive identifier you provide to ensure idempotency of the request. For more information, see Ensuring idempotency in the Amazon EC2 API Reference.

pub fn set_client_token(self, input: Option<String>) -> Self

Unique, case-sensitive identifier you provide to ensure idempotency of the request. For more information, see Ensuring idempotency in the Amazon EC2 API Reference.

pub fn get_client_token(&self) -> &Option<String>

Unique, case-sensitive identifier you provide to ensure idempotency of the request. For more information, see Ensuring idempotency in the Amazon EC2 API Reference.

pub fn description(self, input: impl Into<String>) -> Self

A description for the new AMI in the destination Region.

pub fn set_description(self, input: Option<String>) -> Self

A description for the new AMI in the destination Region.

pub fn get_description(&self) -> &Option<String>

A description for the new AMI in the destination Region.

pub fn encrypted(self, input: bool) -> Self

Specifies whether the destination snapshots of the copied image should be encrypted. You can encrypt a copy of an unencrypted snapshot, but you cannot create an unencrypted copy of an encrypted snapshot. The default KMS key for Amazon EBS is used unless you specify a non-default Key Management Service (KMS) KMS key using KmsKeyId. For more information, see Amazon EBS encryption in the Amazon EC2 User Guide.

pub fn set_encrypted(self, input: Option<bool>) -> Self

Specifies whether the destination snapshots of the copied image should be encrypted. You can encrypt a copy of an unencrypted snapshot, but you cannot create an unencrypted copy of an encrypted snapshot. The default KMS key for Amazon EBS is used unless you specify a non-default Key Management Service (KMS) KMS key using KmsKeyId. For more information, see Amazon EBS encryption in the Amazon EC2 User Guide.

pub fn get_encrypted(&self) -> &Option<bool>

Specifies whether the destination snapshots of the copied image should be encrypted. You can encrypt a copy of an unencrypted snapshot, but you cannot create an unencrypted copy of an encrypted snapshot. The default KMS key for Amazon EBS is used unless you specify a non-default Key Management Service (KMS) KMS key using KmsKeyId. For more information, see Amazon EBS encryption in the Amazon EC2 User Guide.

pub fn kms_key_id(self, input: impl Into<String>) -> Self

The identifier of the symmetric Key Management Service (KMS) KMS key to use when creating encrypted volumes. If this parameter is not specified, your Amazon Web Services managed KMS key for Amazon EBS is used. If you specify a KMS key, you must also set the encrypted state to true.

You can specify a KMS key using any of the following:

• Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.

• Key alias. For example, alias/ExampleAlias.

• Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.

• Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.

Amazon Web Services authenticates the KMS key asynchronously. Therefore, if you specify an identifier that is not valid, the action can appear to complete, but eventually fails.

The specified KMS key must exist in the destination Region.

Amazon EBS does not support asymmetric KMS keys.

pub fn set_kms_key_id(self, input: Option<String>) -> Self

The identifier of the symmetric Key Management Service (KMS) KMS key to use when creating encrypted volumes. If this parameter is not specified, your Amazon Web Services managed KMS key for Amazon EBS is used. If you specify a KMS key, you must also set the encrypted state to true.

You can specify a KMS key using any of the following:

• Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.

• Key alias. For example, alias/ExampleAlias.

• Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.

• Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.

Amazon Web Services authenticates the KMS key asynchronously. Therefore, if you specify an identifier that is not valid, the action can appear to complete, but eventually fails.

The specified KMS key must exist in the destination Region.

Amazon EBS does not support asymmetric KMS keys.

pub fn get_kms_key_id(&self) -> &Option<String>

The identifier of the symmetric Key Management Service (KMS) KMS key to use when creating encrypted volumes. If this parameter is not specified, your Amazon Web Services managed KMS key for Amazon EBS is used. If you specify a KMS key, you must also set the encrypted state to true.

You can specify a KMS key using any of the following:

• Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.

• Key alias. For example, alias/ExampleAlias.

• Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.

• Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.

Amazon Web Services authenticates the KMS key asynchronously. Therefore, if you specify an identifier that is not valid, the action can appear to complete, but eventually fails.

The specified KMS key must exist in the destination Region.

Amazon EBS does not support asymmetric KMS keys.

pub fn name(self, input: impl Into<String>) -> Self

The name of the new AMI in the destination Region.

pub fn set_name(self, input: Option<String>) -> Self

The name of the new AMI in the destination Region.

pub fn get_name(&self) -> &Option<String>

The name of the new AMI in the destination Region.

pub fn source_image_id(self, input: impl Into<String>) -> Self

The ID of the AMI to copy.

pub fn set_source_image_id(self, input: Option<String>) -> Self

The ID of the AMI to copy.

pub fn get_source_image_id(&self) -> &Option<String>

The ID of the AMI to copy.

pub fn source_region(self, input: impl Into<String>) -> Self

The name of the Region that contains the AMI to copy.

pub fn set_source_region(self, input: Option<String>) -> Self

The name of the Region that contains the AMI to copy.

pub fn get_source_region(&self) -> &Option<String>

The name of the Region that contains the AMI to copy.

pub fn destination_outpost_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the Outpost to which to copy the AMI. Only specify this parameter when copying an AMI from an Amazon Web Services Region to an Outpost. The AMI must be in the Region of the destination Outpost. You cannot copy an AMI from an Outpost to a Region, from one Outpost to another, or within the same Outpost.

For more information, see Copy AMIs from an Amazon Web Services Region to an Outpost in the Amazon EC2 User Guide.

pub fn set_destination_outpost_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the Outpost to which to copy the AMI. Only specify this parameter when copying an AMI from an Amazon Web Services Region to an Outpost. The AMI must be in the Region of the destination Outpost. You cannot copy an AMI from an Outpost to a Region, from one Outpost to another, or within the same Outpost.

For more information, see Copy AMIs from an Amazon Web Services Region to an Outpost in the Amazon EC2 User Guide.

pub fn get_destination_outpost_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the Outpost to which to copy the AMI. Only specify this parameter when copying an AMI from an Amazon Web Services Region to an Outpost. The AMI must be in the Region of the destination Outpost. You cannot copy an AMI from an Outpost to a Region, from one Outpost to another, or within the same Outpost.

For more information, see Copy AMIs from an Amazon Web Services Region to an Outpost in the Amazon EC2 User Guide.

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn get_dry_run(&self) -> &Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn copy_image_tags(self, input: bool) -> Self

Indicates whether to include your user-defined AMI tags when copying the AMI.

The following tags will not be copied:

• System tags (prefixed with aws:)

• For public and shared AMIs, user-defined tags that are attached by other Amazon Web Services accounts

Default: Your user-defined AMI tags are not copied.

pub fn set_copy_image_tags(self, input: Option<bool>) -> Self

Indicates whether to include your user-defined AMI tags when copying the AMI.

The following tags will not be copied:

• System tags (prefixed with aws:)

• For public and shared AMIs, user-defined tags that are attached by other Amazon Web Services accounts

Default: Your user-defined AMI tags are not copied.

pub fn get_copy_image_tags(&self) -> &Option<bool>

Indicates whether to include your user-defined AMI tags when copying the AMI.

The following tags will not be copied:

• System tags (prefixed with aws:)

• For public and shared AMIs, user-defined tags that are attached by other Amazon Web Services accounts

Default: Your user-defined AMI tags are not copied.

Trait Implementations

impl Clone for CopyImageFluentBuilder

fn clone(&self) -> CopyImageFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CopyImageFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.