Struct aws_sdk_ec2::operation::run_instances::builders::RunInstancesInputBuilder

#[non_exhaustive]
pub struct RunInstancesInputBuilder { /* private fields */ }

A builder for RunInstancesInput.

Implementations

impl RunInstancesInputBuilder

pub fn block_device_mappings(self, input: BlockDeviceMapping) -> Self

Appends an item to block_device_mappings.

To override the contents of this collection use set_block_device_mappings.

The block device mapping, which defines the EBS volumes and instance store volumes to attach to the instance at launch. For more information, see Block device mappings in the Amazon EC2 User Guide.

pub fn set_block_device_mappings( self, input: Option<Vec<BlockDeviceMapping>> ) -> Self

The block device mapping, which defines the EBS volumes and instance store volumes to attach to the instance at launch. For more information, see Block device mappings in the Amazon EC2 User Guide.

pub fn get_block_device_mappings(&self) -> &Option<Vec<BlockDeviceMapping>>

The block device mapping, which defines the EBS volumes and instance store volumes to attach to the instance at launch. For more information, see Block device mappings in the Amazon EC2 User Guide.

pub fn image_id(self, input: impl Into<String>) -> Self

The ID of the AMI. An AMI ID is required to launch an instance and must be specified here or in a launch template.

pub fn set_image_id(self, input: Option<String>) -> Self

The ID of the AMI. An AMI ID is required to launch an instance and must be specified here or in a launch template.

pub fn get_image_id(&self) -> &Option<String>

The ID of the AMI. An AMI ID is required to launch an instance and must be specified here or in a launch template.

pub fn instance_type(self, input: InstanceType) -> Self

The instance type. For more information, see Instance types in the Amazon EC2 User Guide.

pub fn set_instance_type(self, input: Option<InstanceType>) -> Self

The instance type. For more information, see Instance types in the Amazon EC2 User Guide.

pub fn get_instance_type(&self) -> &Option<InstanceType>

The instance type. For more information, see Instance types in the Amazon EC2 User Guide.

pub fn ipv6_address_count(self, input: i32) -> Self

The number of IPv6 addresses to associate with the primary network interface. Amazon EC2 chooses the IPv6 addresses from the range of your subnet. You cannot specify this option and the option to assign specific IPv6 addresses in the same request. You can specify this option if you've specified a minimum number of instances to launch.

You cannot specify this option and the network interfaces option in the same request.

pub fn set_ipv6_address_count(self, input: Option<i32>) -> Self

The number of IPv6 addresses to associate with the primary network interface. Amazon EC2 chooses the IPv6 addresses from the range of your subnet. You cannot specify this option and the option to assign specific IPv6 addresses in the same request. You can specify this option if you've specified a minimum number of instances to launch.

You cannot specify this option and the network interfaces option in the same request.

pub fn get_ipv6_address_count(&self) -> &Option<i32>

The number of IPv6 addresses to associate with the primary network interface. Amazon EC2 chooses the IPv6 addresses from the range of your subnet. You cannot specify this option and the option to assign specific IPv6 addresses in the same request. You can specify this option if you've specified a minimum number of instances to launch.

You cannot specify this option and the network interfaces option in the same request.

pub fn ipv6_addresses(self, input: InstanceIpv6Address) -> Self

Appends an item to ipv6_addresses.

To override the contents of this collection use set_ipv6_addresses.

The IPv6 addresses from the range of the subnet to associate with the primary network interface. You cannot specify this option and the option to assign a number of IPv6 addresses in the same request. You cannot specify this option if you've specified a minimum number of instances to launch.

You cannot specify this option and the network interfaces option in the same request.

pub fn set_ipv6_addresses(self, input: Option<Vec<InstanceIpv6Address>>) -> Self

The IPv6 addresses from the range of the subnet to associate with the primary network interface. You cannot specify this option and the option to assign a number of IPv6 addresses in the same request. You cannot specify this option if you've specified a minimum number of instances to launch.

You cannot specify this option and the network interfaces option in the same request.

pub fn get_ipv6_addresses(&self) -> &Option<Vec<InstanceIpv6Address>>

The IPv6 addresses from the range of the subnet to associate with the primary network interface. You cannot specify this option and the option to assign a number of IPv6 addresses in the same request. You cannot specify this option if you've specified a minimum number of instances to launch.

You cannot specify this option and the network interfaces option in the same request.

pub fn kernel_id(self, input: impl Into<String>) -> Self

The ID of the kernel.

We recommend that you use PV-GRUB instead of kernels and RAM disks. For more information, see PV-GRUB in the Amazon EC2 User Guide.

pub fn set_kernel_id(self, input: Option<String>) -> Self

The ID of the kernel.

We recommend that you use PV-GRUB instead of kernels and RAM disks. For more information, see PV-GRUB in the Amazon EC2 User Guide.

pub fn get_kernel_id(&self) -> &Option<String>

The ID of the kernel.

We recommend that you use PV-GRUB instead of kernels and RAM disks. For more information, see PV-GRUB in the Amazon EC2 User Guide.

pub fn key_name(self, input: impl Into<String>) -> Self

The name of the key pair. You can create a key pair using CreateKeyPair or ImportKeyPair.

If you do not specify a key pair, you can't connect to the instance unless you choose an AMI that is configured to allow users another way to log in.

pub fn set_key_name(self, input: Option<String>) -> Self

The name of the key pair. You can create a key pair using CreateKeyPair or ImportKeyPair.

If you do not specify a key pair, you can't connect to the instance unless you choose an AMI that is configured to allow users another way to log in.

pub fn get_key_name(&self) -> &Option<String>

The name of the key pair. You can create a key pair using CreateKeyPair or ImportKeyPair.

If you do not specify a key pair, you can't connect to the instance unless you choose an AMI that is configured to allow users another way to log in.

pub fn max_count(self, input: i32) -> Self

The maximum number of instances to launch. If you specify more instances than Amazon EC2 can launch in the target Availability Zone, Amazon EC2 launches the largest possible number of instances above MinCount.

Constraints: Between 1 and the maximum number you're allowed for the specified instance type. For more information about the default limits, and how to request an increase, see How many instances can I run in Amazon EC2 in the Amazon EC2 FAQ.

pub fn set_max_count(self, input: Option<i32>) -> Self

The maximum number of instances to launch. If you specify more instances than Amazon EC2 can launch in the target Availability Zone, Amazon EC2 launches the largest possible number of instances above MinCount.

Constraints: Between 1 and the maximum number you're allowed for the specified instance type. For more information about the default limits, and how to request an increase, see How many instances can I run in Amazon EC2 in the Amazon EC2 FAQ.

pub fn get_max_count(&self) -> &Option<i32>

The maximum number of instances to launch. If you specify more instances than Amazon EC2 can launch in the target Availability Zone, Amazon EC2 launches the largest possible number of instances above MinCount.

Constraints: Between 1 and the maximum number you're allowed for the specified instance type. For more information about the default limits, and how to request an increase, see How many instances can I run in Amazon EC2 in the Amazon EC2 FAQ.

pub fn min_count(self, input: i32) -> Self

The minimum number of instances to launch. If you specify a minimum that is more instances than Amazon EC2 can launch in the target Availability Zone, Amazon EC2 launches no instances.

Constraints: Between 1 and the maximum number you're allowed for the specified instance type. For more information about the default limits, and how to request an increase, see How many instances can I run in Amazon EC2 in the Amazon EC2 General FAQ.

pub fn set_min_count(self, input: Option<i32>) -> Self

The minimum number of instances to launch. If you specify a minimum that is more instances than Amazon EC2 can launch in the target Availability Zone, Amazon EC2 launches no instances.

Constraints: Between 1 and the maximum number you're allowed for the specified instance type. For more information about the default limits, and how to request an increase, see How many instances can I run in Amazon EC2 in the Amazon EC2 General FAQ.

pub fn get_min_count(&self) -> &Option<i32>

The minimum number of instances to launch. If you specify a minimum that is more instances than Amazon EC2 can launch in the target Availability Zone, Amazon EC2 launches no instances.

Constraints: Between 1 and the maximum number you're allowed for the specified instance type. For more information about the default limits, and how to request an increase, see How many instances can I run in Amazon EC2 in the Amazon EC2 General FAQ.

pub fn monitoring(self, input: RunInstancesMonitoringEnabled) -> Self

Specifies whether detailed monitoring is enabled for the instance.

pub fn set_monitoring( self, input: Option<RunInstancesMonitoringEnabled> ) -> Self

Specifies whether detailed monitoring is enabled for the instance.

pub fn get_monitoring(&self) -> &Option<RunInstancesMonitoringEnabled>

Specifies whether detailed monitoring is enabled for the instance.

pub fn placement(self, input: Placement) -> Self

The placement for the instance.

pub fn set_placement(self, input: Option<Placement>) -> Self

The placement for the instance.

pub fn get_placement(&self) -> &Option<Placement>

The placement for the instance.

pub fn ramdisk_id(self, input: impl Into<String>) -> Self

The ID of the RAM disk to select. Some kernels require additional drivers at launch. Check the kernel requirements for information about whether you need to specify a RAM disk. To find kernel requirements, go to the Amazon Web Services Resource Center and search for the kernel ID.

We recommend that you use PV-GRUB instead of kernels and RAM disks. For more information, see PV-GRUB in the Amazon EC2 User Guide.

pub fn set_ramdisk_id(self, input: Option<String>) -> Self

The ID of the RAM disk to select. Some kernels require additional drivers at launch. Check the kernel requirements for information about whether you need to specify a RAM disk. To find kernel requirements, go to the Amazon Web Services Resource Center and search for the kernel ID.

We recommend that you use PV-GRUB instead of kernels and RAM disks. For more information, see PV-GRUB in the Amazon EC2 User Guide.

pub fn get_ramdisk_id(&self) -> &Option<String>

The ID of the RAM disk to select. Some kernels require additional drivers at launch. Check the kernel requirements for information about whether you need to specify a RAM disk. To find kernel requirements, go to the Amazon Web Services Resource Center and search for the kernel ID.

We recommend that you use PV-GRUB instead of kernels and RAM disks. For more information, see PV-GRUB in the Amazon EC2 User Guide.

pub fn security_group_ids(self, input: impl Into<String>) -> Self

Appends an item to security_group_ids.

To override the contents of this collection use set_security_group_ids.

The IDs of the security groups. You can create a security group using CreateSecurityGroup.

If you specify a network interface, you must specify any security groups as part of the network interface.

pub fn set_security_group_ids(self, input: Option<Vec<String>>) -> Self

The IDs of the security groups. You can create a security group using CreateSecurityGroup.

If you specify a network interface, you must specify any security groups as part of the network interface.

pub fn get_security_group_ids(&self) -> &Option<Vec<String>>

The IDs of the security groups. You can create a security group using CreateSecurityGroup.

If you specify a network interface, you must specify any security groups as part of the network interface.

pub fn security_groups(self, input: impl Into<String>) -> Self

Appends an item to security_groups.

To override the contents of this collection use set_security_groups.

[Default VPC] The names of the security groups.

If you specify a network interface, you must specify any security groups as part of the network interface.

Default: Amazon EC2 uses the default security group.

pub fn set_security_groups(self, input: Option<Vec<String>>) -> Self

[Default VPC] The names of the security groups.

If you specify a network interface, you must specify any security groups as part of the network interface.

Default: Amazon EC2 uses the default security group.

pub fn get_security_groups(&self) -> &Option<Vec<String>>

[Default VPC] The names of the security groups.

If you specify a network interface, you must specify any security groups as part of the network interface.

Default: Amazon EC2 uses the default security group.

pub fn subnet_id(self, input: impl Into<String>) -> Self

The ID of the subnet to launch the instance into.

If you specify a network interface, you must specify any subnets as part of the network interface.

pub fn set_subnet_id(self, input: Option<String>) -> Self

The ID of the subnet to launch the instance into.

If you specify a network interface, you must specify any subnets as part of the network interface.

pub fn get_subnet_id(&self) -> &Option<String>

The ID of the subnet to launch the instance into.

If you specify a network interface, you must specify any subnets as part of the network interface.

pub fn user_data(self, input: impl Into<String>) -> Self

The user data script to make available to the instance. For more information, see Run commands on your Linux instance at launch and Run commands on your Windows instance at launch. If you are using a command line tool, base64-encoding is performed for you, and you can load the text from a file. Otherwise, you must provide base64-encoded text. User data is limited to 16 KB.

pub fn set_user_data(self, input: Option<String>) -> Self

The user data script to make available to the instance. For more information, see Run commands on your Linux instance at launch and Run commands on your Windows instance at launch. If you are using a command line tool, base64-encoding is performed for you, and you can load the text from a file. Otherwise, you must provide base64-encoded text. User data is limited to 16 KB.

pub fn get_user_data(&self) -> &Option<String>

The user data script to make available to the instance. For more information, see Run commands on your Linux instance at launch and Run commands on your Windows instance at launch. If you are using a command line tool, base64-encoding is performed for you, and you can load the text from a file. Otherwise, you must provide base64-encoded text. User data is limited to 16 KB.

pub fn additional_info(self, input: impl Into<String>) -> Self

Reserved.

pub fn set_additional_info(self, input: Option<String>) -> Self

Reserved.

pub fn get_additional_info(&self) -> &Option<String>

Reserved.

pub fn client_token(self, input: impl Into<String>) -> Self

Unique, case-sensitive identifier you provide to ensure the idempotency of the request. If you do not specify a client token, a randomly generated token is used for the request to ensure idempotency.

For more information, see Ensuring Idempotency.

Constraints: Maximum 64 ASCII characters

pub fn set_client_token(self, input: Option<String>) -> Self

Unique, case-sensitive identifier you provide to ensure the idempotency of the request. If you do not specify a client token, a randomly generated token is used for the request to ensure idempotency.

For more information, see Ensuring Idempotency.

Constraints: Maximum 64 ASCII characters

pub fn get_client_token(&self) -> &Option<String>

Unique, case-sensitive identifier you provide to ensure the idempotency of the request. If you do not specify a client token, a randomly generated token is used for the request to ensure idempotency.

For more information, see Ensuring Idempotency.

Constraints: Maximum 64 ASCII characters

pub fn disable_api_termination(self, input: bool) -> Self

If you set this parameter to true, you can't terminate the instance using the Amazon EC2 console, CLI, or API; otherwise, you can. To change this attribute after launch, use ModifyInstanceAttribute. Alternatively, if you set InstanceInitiatedShutdownBehavior to terminate, you can terminate the instance by running the shutdown command from the instance.

Default: false

pub fn set_disable_api_termination(self, input: Option<bool>) -> Self

If you set this parameter to true, you can't terminate the instance using the Amazon EC2 console, CLI, or API; otherwise, you can. To change this attribute after launch, use ModifyInstanceAttribute. Alternatively, if you set InstanceInitiatedShutdownBehavior to terminate, you can terminate the instance by running the shutdown command from the instance.

Default: false

pub fn get_disable_api_termination(&self) -> &Option<bool>

If you set this parameter to true, you can't terminate the instance using the Amazon EC2 console, CLI, or API; otherwise, you can. To change this attribute after launch, use ModifyInstanceAttribute. Alternatively, if you set InstanceInitiatedShutdownBehavior to terminate, you can terminate the instance by running the shutdown command from the instance.

Default: false

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn get_dry_run(&self) -> &Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn ebs_optimized(self, input: bool) -> Self

Indicates whether the instance is optimized for Amazon EBS I/O. This optimization provides dedicated throughput to Amazon EBS and an optimized configuration stack to provide optimal Amazon EBS I/O performance. This optimization isn't available with all instance types. Additional usage charges apply when using an EBS-optimized instance.

Default: false

pub fn set_ebs_optimized(self, input: Option<bool>) -> Self

Indicates whether the instance is optimized for Amazon EBS I/O. This optimization provides dedicated throughput to Amazon EBS and an optimized configuration stack to provide optimal Amazon EBS I/O performance. This optimization isn't available with all instance types. Additional usage charges apply when using an EBS-optimized instance.

Default: false

pub fn get_ebs_optimized(&self) -> &Option<bool>

Indicates whether the instance is optimized for Amazon EBS I/O. This optimization provides dedicated throughput to Amazon EBS and an optimized configuration stack to provide optimal Amazon EBS I/O performance. This optimization isn't available with all instance types. Additional usage charges apply when using an EBS-optimized instance.

Default: false

pub fn iam_instance_profile( self, input: IamInstanceProfileSpecification ) -> Self

The name or Amazon Resource Name (ARN) of an IAM instance profile.

pub fn set_iam_instance_profile( self, input: Option<IamInstanceProfileSpecification> ) -> Self

The name or Amazon Resource Name (ARN) of an IAM instance profile.

pub fn get_iam_instance_profile( &self ) -> &Option<IamInstanceProfileSpecification>

The name or Amazon Resource Name (ARN) of an IAM instance profile.

pub fn instance_initiated_shutdown_behavior( self, input: ShutdownBehavior ) -> Self

Indicates whether an instance stops or terminates when you initiate shutdown from the instance (using the operating system command for system shutdown).

Default: stop

pub fn set_instance_initiated_shutdown_behavior( self, input: Option<ShutdownBehavior> ) -> Self

Indicates whether an instance stops or terminates when you initiate shutdown from the instance (using the operating system command for system shutdown).

Default: stop

pub fn get_instance_initiated_shutdown_behavior( &self ) -> &Option<ShutdownBehavior>

Indicates whether an instance stops or terminates when you initiate shutdown from the instance (using the operating system command for system shutdown).

Default: stop

pub fn network_interfaces( self, input: InstanceNetworkInterfaceSpecification ) -> Self

Appends an item to network_interfaces.

To override the contents of this collection use set_network_interfaces.

The network interfaces to associate with the instance. If you specify a network interface, you must specify any security groups and subnets as part of the network interface.

pub fn set_network_interfaces( self, input: Option<Vec<InstanceNetworkInterfaceSpecification>> ) -> Self

The network interfaces to associate with the instance. If you specify a network interface, you must specify any security groups and subnets as part of the network interface.

pub fn get_network_interfaces( &self ) -> &Option<Vec<InstanceNetworkInterfaceSpecification>>

The network interfaces to associate with the instance. If you specify a network interface, you must specify any security groups and subnets as part of the network interface.

pub fn private_ip_address(self, input: impl Into<String>) -> Self

The primary IPv4 address. You must specify a value from the IPv4 address range of the subnet.

Only one private IP address can be designated as primary. You can't specify this option if you've specified the option to designate a private IP address as the primary IP address in a network interface specification. You cannot specify this option if you're launching more than one instance in the request.

You cannot specify this option and the network interfaces option in the same request.

pub fn set_private_ip_address(self, input: Option<String>) -> Self

The primary IPv4 address. You must specify a value from the IPv4 address range of the subnet.

Only one private IP address can be designated as primary. You can't specify this option if you've specified the option to designate a private IP address as the primary IP address in a network interface specification. You cannot specify this option if you're launching more than one instance in the request.

You cannot specify this option and the network interfaces option in the same request.

pub fn get_private_ip_address(&self) -> &Option<String>

The primary IPv4 address. You must specify a value from the IPv4 address range of the subnet.

Only one private IP address can be designated as primary. You can't specify this option if you've specified the option to designate a private IP address as the primary IP address in a network interface specification. You cannot specify this option if you're launching more than one instance in the request.

You cannot specify this option and the network interfaces option in the same request.

pub fn elastic_gpu_specification(self, input: ElasticGpuSpecification) -> Self

Appends an item to elastic_gpu_specification.

To override the contents of this collection use set_elastic_gpu_specification.

An elastic GPU to associate with the instance. An Elastic GPU is a GPU resource that you can attach to your Windows instance to accelerate the graphics performance of your applications. For more information, see Amazon EC2 Elastic GPUs in the Amazon EC2 User Guide.

pub fn set_elastic_gpu_specification( self, input: Option<Vec<ElasticGpuSpecification>> ) -> Self

An elastic GPU to associate with the instance. An Elastic GPU is a GPU resource that you can attach to your Windows instance to accelerate the graphics performance of your applications. For more information, see Amazon EC2 Elastic GPUs in the Amazon EC2 User Guide.

pub fn get_elastic_gpu_specification( &self ) -> &Option<Vec<ElasticGpuSpecification>>

An elastic GPU to associate with the instance. An Elastic GPU is a GPU resource that you can attach to your Windows instance to accelerate the graphics performance of your applications. For more information, see Amazon EC2 Elastic GPUs in the Amazon EC2 User Guide.

pub fn elastic_inference_accelerators( self, input: ElasticInferenceAccelerator ) -> Self

Appends an item to elastic_inference_accelerators.

To override the contents of this collection use set_elastic_inference_accelerators.

An elastic inference accelerator to associate with the instance. Elastic inference accelerators are a resource you can attach to your Amazon EC2 instances to accelerate your Deep Learning (DL) inference workloads.

You cannot specify accelerators from different generations in the same request.

Starting April 15, 2023, Amazon Web Services will not onboard new customers to Amazon Elastic Inference (EI), and will help current customers migrate their workloads to options that offer better price and performance. After April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon SageMaker, Amazon ECS, or Amazon EC2. However, customers who have used Amazon EI at least once during the past 30-day period are considered current customers and will be able to continue using the service.

pub fn set_elastic_inference_accelerators( self, input: Option<Vec<ElasticInferenceAccelerator>> ) -> Self

An elastic inference accelerator to associate with the instance. Elastic inference accelerators are a resource you can attach to your Amazon EC2 instances to accelerate your Deep Learning (DL) inference workloads.

You cannot specify accelerators from different generations in the same request.

Starting April 15, 2023, Amazon Web Services will not onboard new customers to Amazon Elastic Inference (EI), and will help current customers migrate their workloads to options that offer better price and performance. After April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon SageMaker, Amazon ECS, or Amazon EC2. However, customers who have used Amazon EI at least once during the past 30-day period are considered current customers and will be able to continue using the service.

pub fn get_elastic_inference_accelerators( &self ) -> &Option<Vec<ElasticInferenceAccelerator>>

An elastic inference accelerator to associate with the instance. Elastic inference accelerators are a resource you can attach to your Amazon EC2 instances to accelerate your Deep Learning (DL) inference workloads.

You cannot specify accelerators from different generations in the same request.

Starting April 15, 2023, Amazon Web Services will not onboard new customers to Amazon Elastic Inference (EI), and will help current customers migrate their workloads to options that offer better price and performance. After April 15, 2023, new customers will not be able to launch instances with Amazon EI accelerators in Amazon SageMaker, Amazon ECS, or Amazon EC2. However, customers who have used Amazon EI at least once during the past 30-day period are considered current customers and will be able to continue using the service.

pub fn tag_specifications(self, input: TagSpecification) -> Self

Appends an item to tag_specifications.

To override the contents of this collection use set_tag_specifications.

The tags to apply to the resources that are created during instance launch.

You can specify tags for the following resources only:

• Instances

• Volumes

• Elastic graphics

• Spot Instance requests

• Network interfaces

To tag a resource after it has been created, see CreateTags.

pub fn set_tag_specifications( self, input: Option<Vec<TagSpecification>> ) -> Self

The tags to apply to the resources that are created during instance launch.

You can specify tags for the following resources only:

• Instances

• Volumes

• Elastic graphics

• Spot Instance requests

• Network interfaces

To tag a resource after it has been created, see CreateTags.

pub fn get_tag_specifications(&self) -> &Option<Vec<TagSpecification>>

The tags to apply to the resources that are created during instance launch.

You can specify tags for the following resources only:

• Instances

• Volumes

• Elastic graphics

• Spot Instance requests

• Network interfaces

To tag a resource after it has been created, see CreateTags.

pub fn launch_template(self, input: LaunchTemplateSpecification) -> Self

The launch template to use to launch the instances. Any parameters that you specify in RunInstances override the same parameters in the launch template. You can specify either the name or ID of a launch template, but not both.

pub fn set_launch_template( self, input: Option<LaunchTemplateSpecification> ) -> Self

The launch template to use to launch the instances. Any parameters that you specify in RunInstances override the same parameters in the launch template. You can specify either the name or ID of a launch template, but not both.

pub fn get_launch_template(&self) -> &Option<LaunchTemplateSpecification>

The launch template to use to launch the instances. Any parameters that you specify in RunInstances override the same parameters in the launch template. You can specify either the name or ID of a launch template, but not both.

pub fn instance_market_options( self, input: InstanceMarketOptionsRequest ) -> Self

The market (purchasing) option for the instances.

For RunInstances, persistent Spot Instance requests are only supported when InstanceInterruptionBehavior is set to either hibernate or stop.

pub fn set_instance_market_options( self, input: Option<InstanceMarketOptionsRequest> ) -> Self

The market (purchasing) option for the instances.

For RunInstances, persistent Spot Instance requests are only supported when InstanceInterruptionBehavior is set to either hibernate or stop.

pub fn get_instance_market_options( &self ) -> &Option<InstanceMarketOptionsRequest>

The market (purchasing) option for the instances.

For RunInstances, persistent Spot Instance requests are only supported when InstanceInterruptionBehavior is set to either hibernate or stop.

pub fn credit_specification(self, input: CreditSpecificationRequest) -> Self

The credit option for CPU usage of the burstable performance instance. Valid values are standard and unlimited. To change this attribute after launch, use ModifyInstanceCreditSpecification. For more information, see Burstable performance instances in the Amazon EC2 User Guide.

Default: standard (T2 instances) or unlimited (T3/T3a/T4g instances)

For T3 instances with host tenancy, only standard is supported.

pub fn set_credit_specification( self, input: Option<CreditSpecificationRequest> ) -> Self

The credit option for CPU usage of the burstable performance instance. Valid values are standard and unlimited. To change this attribute after launch, use ModifyInstanceCreditSpecification. For more information, see Burstable performance instances in the Amazon EC2 User Guide.

Default: standard (T2 instances) or unlimited (T3/T3a/T4g instances)

For T3 instances with host tenancy, only standard is supported.

pub fn get_credit_specification(&self) -> &Option<CreditSpecificationRequest>

The credit option for CPU usage of the burstable performance instance. Valid values are standard and unlimited. To change this attribute after launch, use ModifyInstanceCreditSpecification. For more information, see Burstable performance instances in the Amazon EC2 User Guide.

Default: standard (T2 instances) or unlimited (T3/T3a/T4g instances)

For T3 instances with host tenancy, only standard is supported.

pub fn cpu_options(self, input: CpuOptionsRequest) -> Self

The CPU options for the instance. For more information, see Optimize CPU options in the Amazon EC2 User Guide.

pub fn set_cpu_options(self, input: Option<CpuOptionsRequest>) -> Self

The CPU options for the instance. For more information, see Optimize CPU options in the Amazon EC2 User Guide.

pub fn get_cpu_options(&self) -> &Option<CpuOptionsRequest>

The CPU options for the instance. For more information, see Optimize CPU options in the Amazon EC2 User Guide.

pub fn capacity_reservation_specification( self, input: CapacityReservationSpecification ) -> Self

Information about the Capacity Reservation targeting option. If you do not specify this parameter, the instance's Capacity Reservation preference defaults to open, which enables it to run in any open Capacity Reservation that has matching attributes (instance type, platform, Availability Zone).

pub fn set_capacity_reservation_specification( self, input: Option<CapacityReservationSpecification> ) -> Self

Information about the Capacity Reservation targeting option. If you do not specify this parameter, the instance's Capacity Reservation preference defaults to open, which enables it to run in any open Capacity Reservation that has matching attributes (instance type, platform, Availability Zone).

pub fn get_capacity_reservation_specification( &self ) -> &Option<CapacityReservationSpecification>

Information about the Capacity Reservation targeting option. If you do not specify this parameter, the instance's Capacity Reservation preference defaults to open, which enables it to run in any open Capacity Reservation that has matching attributes (instance type, platform, Availability Zone).

pub fn hibernation_options(self, input: HibernationOptionsRequest) -> Self

Indicates whether an instance is enabled for hibernation. This parameter is valid only if the instance meets the hibernation prerequisites. For more information, see Hibernate your instance in the Amazon EC2 User Guide.

You can't enable hibernation and Amazon Web Services Nitro Enclaves on the same instance.

pub fn set_hibernation_options( self, input: Option<HibernationOptionsRequest> ) -> Self

Indicates whether an instance is enabled for hibernation. This parameter is valid only if the instance meets the hibernation prerequisites. For more information, see Hibernate your instance in the Amazon EC2 User Guide.

You can't enable hibernation and Amazon Web Services Nitro Enclaves on the same instance.

pub fn get_hibernation_options(&self) -> &Option<HibernationOptionsRequest>

Indicates whether an instance is enabled for hibernation. This parameter is valid only if the instance meets the hibernation prerequisites. For more information, see Hibernate your instance in the Amazon EC2 User Guide.

You can't enable hibernation and Amazon Web Services Nitro Enclaves on the same instance.

pub fn license_specifications(self, input: LicenseConfigurationRequest) -> Self

Appends an item to license_specifications.

To override the contents of this collection use set_license_specifications.

The license configurations.

pub fn set_license_specifications( self, input: Option<Vec<LicenseConfigurationRequest>> ) -> Self

The license configurations.

pub fn get_license_specifications( &self ) -> &Option<Vec<LicenseConfigurationRequest>>

The license configurations.

pub fn metadata_options(self, input: InstanceMetadataOptionsRequest) -> Self

The metadata options for the instance. For more information, see Instance metadata and user data.

pub fn set_metadata_options( self, input: Option<InstanceMetadataOptionsRequest> ) -> Self

The metadata options for the instance. For more information, see Instance metadata and user data.

pub fn get_metadata_options(&self) -> &Option<InstanceMetadataOptionsRequest>

The metadata options for the instance. For more information, see Instance metadata and user data.

pub fn enclave_options(self, input: EnclaveOptionsRequest) -> Self

Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves. For more information, see What is Amazon Web Services Nitro Enclaves? in the Amazon Web Services Nitro Enclaves User Guide.

You can't enable Amazon Web Services Nitro Enclaves and hibernation on the same instance.

pub fn set_enclave_options(self, input: Option<EnclaveOptionsRequest>) -> Self

Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves. For more information, see What is Amazon Web Services Nitro Enclaves? in the Amazon Web Services Nitro Enclaves User Guide.

You can't enable Amazon Web Services Nitro Enclaves and hibernation on the same instance.

pub fn get_enclave_options(&self) -> &Option<EnclaveOptionsRequest>

Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves. For more information, see What is Amazon Web Services Nitro Enclaves? in the Amazon Web Services Nitro Enclaves User Guide.

You can't enable Amazon Web Services Nitro Enclaves and hibernation on the same instance.

pub fn private_dns_name_options( self, input: PrivateDnsNameOptionsRequest ) -> Self

The options for the instance hostname. The default values are inherited from the subnet. Applies only if creating a network interface, not attaching an existing one.

pub fn set_private_dns_name_options( self, input: Option<PrivateDnsNameOptionsRequest> ) -> Self

The options for the instance hostname. The default values are inherited from the subnet. Applies only if creating a network interface, not attaching an existing one.

pub fn get_private_dns_name_options( &self ) -> &Option<PrivateDnsNameOptionsRequest>

The options for the instance hostname. The default values are inherited from the subnet. Applies only if creating a network interface, not attaching an existing one.

pub fn maintenance_options( self, input: InstanceMaintenanceOptionsRequest ) -> Self

The maintenance and recovery options for the instance.

pub fn set_maintenance_options( self, input: Option<InstanceMaintenanceOptionsRequest> ) -> Self

The maintenance and recovery options for the instance.

pub fn get_maintenance_options( &self ) -> &Option<InstanceMaintenanceOptionsRequest>

The maintenance and recovery options for the instance.

pub fn disable_api_stop(self, input: bool) -> Self

Indicates whether an instance is enabled for stop protection. For more information, see Stop protection.

pub fn set_disable_api_stop(self, input: Option<bool>) -> Self

Indicates whether an instance is enabled for stop protection. For more information, see Stop protection.

pub fn get_disable_api_stop(&self) -> &Option<bool>

Indicates whether an instance is enabled for stop protection. For more information, see Stop protection.

pub fn build(self) -> Result<RunInstancesInput, BuildError>

Consumes the builder and constructs a RunInstancesInput.

impl RunInstancesInputBuilder

pub async fn send_with( self, client: &Client ) -> Result<RunInstancesOutput, SdkError<RunInstancesError, HttpResponse>>

Sends a request with this input using the given client.

Trait Implementations

impl Clone for RunInstancesInputBuilder

fn clone(&self) -> RunInstancesInputBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for RunInstancesInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for RunInstancesInputBuilder

fn default() -> RunInstancesInputBuilder

Returns the “default value” for a type.

impl PartialEq<RunInstancesInputBuilder> for RunInstancesInputBuilder

fn eq(&self, other: &RunInstancesInputBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for RunInstancesInputBuilder