Struct aws_sdk_ec2::operation::replace_network_acl_entry::builders::ReplaceNetworkAclEntryFluentBuilder

pub struct ReplaceNetworkAclEntryFluentBuilder { /* private fields */ }

Fluent builder constructing a request to ReplaceNetworkAclEntry.

Replaces an entry (rule) in a network ACL. For more information, see Network ACLs in the Amazon VPC User Guide.

Implementations

impl ReplaceNetworkAclEntryFluentBuilder

pub fn as_input(&self) -> &ReplaceNetworkAclEntryInputBuilder

Access the ReplaceNetworkAclEntry as a reference.

pub async fn send( self ) -> Result<ReplaceNetworkAclEntryOutput, SdkError<ReplaceNetworkAclEntryError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub async fn customize( self ) -> Result<CustomizableOperation<ReplaceNetworkAclEntryOutput, ReplaceNetworkAclEntryError>, SdkError<ReplaceNetworkAclEntryError>>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn cidr_block(self, input: impl Into<String>) -> Self

The IPv4 network range to allow or deny, in CIDR notation (for example 172.16.0.0/24).

pub fn set_cidr_block(self, input: Option<String>) -> Self

The IPv4 network range to allow or deny, in CIDR notation (for example 172.16.0.0/24).

pub fn get_cidr_block(&self) -> &Option<String>

The IPv4 network range to allow or deny, in CIDR notation (for example 172.16.0.0/24).

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn get_dry_run(&self) -> &Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn egress(self, input: bool) -> Self

Indicates whether to replace the egress rule.

Default: If no value is specified, we replace the ingress rule.

pub fn set_egress(self, input: Option<bool>) -> Self

Indicates whether to replace the egress rule.

Default: If no value is specified, we replace the ingress rule.

pub fn get_egress(&self) -> &Option<bool>

Indicates whether to replace the egress rule.

Default: If no value is specified, we replace the ingress rule.

pub fn icmp_type_code(self, input: IcmpTypeCode) -> Self

ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying protocol 1 (ICMP) or protocol 58 (ICMPv6) with an IPv6 CIDR block.

pub fn set_icmp_type_code(self, input: Option<IcmpTypeCode>) -> Self

ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying protocol 1 (ICMP) or protocol 58 (ICMPv6) with an IPv6 CIDR block.

pub fn get_icmp_type_code(&self) -> &Option<IcmpTypeCode>

ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying protocol 1 (ICMP) or protocol 58 (ICMPv6) with an IPv6 CIDR block.

pub fn ipv6_cidr_block(self, input: impl Into<String>) -> Self

The IPv6 network range to allow or deny, in CIDR notation (for example 2001:bd8:1234:1a00::/64).

pub fn set_ipv6_cidr_block(self, input: Option<String>) -> Self

The IPv6 network range to allow or deny, in CIDR notation (for example 2001:bd8:1234:1a00::/64).

pub fn get_ipv6_cidr_block(&self) -> &Option<String>

The IPv6 network range to allow or deny, in CIDR notation (for example 2001:bd8:1234:1a00::/64).

pub fn network_acl_id(self, input: impl Into<String>) -> Self

The ID of the ACL.

pub fn set_network_acl_id(self, input: Option<String>) -> Self

The ID of the ACL.

pub fn get_network_acl_id(&self) -> &Option<String>

The ID of the ACL.

pub fn port_range(self, input: PortRange) -> Self

TCP or UDP protocols: The range of ports the rule applies to. Required if specifying protocol 6 (TCP) or 17 (UDP).

pub fn set_port_range(self, input: Option<PortRange>) -> Self

TCP or UDP protocols: The range of ports the rule applies to. Required if specifying protocol 6 (TCP) or 17 (UDP).

pub fn get_port_range(&self) -> &Option<PortRange>

TCP or UDP protocols: The range of ports the rule applies to. Required if specifying protocol 6 (TCP) or 17 (UDP).

pub fn protocol(self, input: impl Into<String>) -> Self

The protocol number. A value of "-1" means all protocols. If you specify "-1" or a protocol number other than "6" (TCP), "17" (UDP), or "1" (ICMP), traffic on all ports is allowed, regardless of any ports or ICMP types or codes that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv4 CIDR block, traffic for all ICMP types and codes allowed, regardless of any that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv6 CIDR block, you must specify an ICMP type and code.

pub fn set_protocol(self, input: Option<String>) -> Self

The protocol number. A value of "-1" means all protocols. If you specify "-1" or a protocol number other than "6" (TCP), "17" (UDP), or "1" (ICMP), traffic on all ports is allowed, regardless of any ports or ICMP types or codes that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv4 CIDR block, traffic for all ICMP types and codes allowed, regardless of any that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv6 CIDR block, you must specify an ICMP type and code.

pub fn get_protocol(&self) -> &Option<String>

The protocol number. A value of "-1" means all protocols. If you specify "-1" or a protocol number other than "6" (TCP), "17" (UDP), or "1" (ICMP), traffic on all ports is allowed, regardless of any ports or ICMP types or codes that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv4 CIDR block, traffic for all ICMP types and codes allowed, regardless of any that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv6 CIDR block, you must specify an ICMP type and code.

pub fn rule_action(self, input: RuleAction) -> Self

Indicates whether to allow or deny the traffic that matches the rule.

pub fn set_rule_action(self, input: Option<RuleAction>) -> Self

Indicates whether to allow or deny the traffic that matches the rule.

pub fn get_rule_action(&self) -> &Option<RuleAction>

Indicates whether to allow or deny the traffic that matches the rule.

pub fn rule_number(self, input: i32) -> Self

The rule number of the entry to replace.

pub fn set_rule_number(self, input: Option<i32>) -> Self

The rule number of the entry to replace.

pub fn get_rule_number(&self) -> &Option<i32>

The rule number of the entry to replace.

Trait Implementations

impl Clone for ReplaceNetworkAclEntryFluentBuilder

fn clone(&self) -> ReplaceNetworkAclEntryFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ReplaceNetworkAclEntryFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.