pub struct ModifySubnetAttributeFluentBuilder { /* private fields */ }
Expand description

Fluent builder constructing a request to ModifySubnetAttribute.

Modifies a subnet attribute. You can only modify one attribute at a time.

Use this action to modify subnets on Amazon Web Services Outposts.

  • To modify a subnet on an Outpost rack, set both MapCustomerOwnedIpOnLaunch and CustomerOwnedIpv4Pool. These two parameters act as a single attribute.

  • To modify a subnet on an Outpost server, set either EnableLniAtDeviceIndex or DisableLniAtDeviceIndex.

For more information about Amazon Web Services Outposts, see the following:

Implementations§

source§

impl ModifySubnetAttributeFluentBuilder

source

pub fn as_input(&self) -> &ModifySubnetAttributeInputBuilder

Access the ModifySubnetAttribute as a reference.

source

pub async fn send( self ) -> Result<ModifySubnetAttributeOutput, SdkError<ModifySubnetAttributeError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

source

pub async fn customize( self ) -> Result<CustomizableOperation<ModifySubnetAttributeOutput, ModifySubnetAttributeError>, SdkError<ModifySubnetAttributeError>>

Consumes this builder, creating a customizable operation that can be modified before being sent.

source

pub fn assign_ipv6_address_on_creation( self, input: AttributeBooleanValue ) -> Self

Specify true to indicate that network interfaces created in the specified subnet should be assigned an IPv6 address. This includes a network interface that's created when launching an instance into the subnet (the instance therefore receives an IPv6 address).

If you enable the IPv6 addressing feature for your subnet, your network interface or instance only receives an IPv6 address if it's created using version 2016-11-15 or later of the Amazon EC2 API.

source

pub fn set_assign_ipv6_address_on_creation( self, input: Option<AttributeBooleanValue> ) -> Self

Specify true to indicate that network interfaces created in the specified subnet should be assigned an IPv6 address. This includes a network interface that's created when launching an instance into the subnet (the instance therefore receives an IPv6 address).

If you enable the IPv6 addressing feature for your subnet, your network interface or instance only receives an IPv6 address if it's created using version 2016-11-15 or later of the Amazon EC2 API.

source

pub fn get_assign_ipv6_address_on_creation( &self ) -> &Option<AttributeBooleanValue>

Specify true to indicate that network interfaces created in the specified subnet should be assigned an IPv6 address. This includes a network interface that's created when launching an instance into the subnet (the instance therefore receives an IPv6 address).

If you enable the IPv6 addressing feature for your subnet, your network interface or instance only receives an IPv6 address if it's created using version 2016-11-15 or later of the Amazon EC2 API.

source

pub fn map_public_ip_on_launch(self, input: AttributeBooleanValue) -> Self

Specify true to indicate that network interfaces attached to instances created in the specified subnet should be assigned a public IPv4 address.

source

pub fn set_map_public_ip_on_launch( self, input: Option<AttributeBooleanValue> ) -> Self

Specify true to indicate that network interfaces attached to instances created in the specified subnet should be assigned a public IPv4 address.

source

pub fn get_map_public_ip_on_launch(&self) -> &Option<AttributeBooleanValue>

Specify true to indicate that network interfaces attached to instances created in the specified subnet should be assigned a public IPv4 address.

source

pub fn subnet_id(self, input: impl Into<String>) -> Self

The ID of the subnet.

source

pub fn set_subnet_id(self, input: Option<String>) -> Self

The ID of the subnet.

source

pub fn get_subnet_id(&self) -> &Option<String>

The ID of the subnet.

source

pub fn map_customer_owned_ip_on_launch( self, input: AttributeBooleanValue ) -> Self

Specify true to indicate that network interfaces attached to instances created in the specified subnet should be assigned a customer-owned IPv4 address.

When this value is true, you must specify the customer-owned IP pool using CustomerOwnedIpv4Pool.

source

pub fn set_map_customer_owned_ip_on_launch( self, input: Option<AttributeBooleanValue> ) -> Self

Specify true to indicate that network interfaces attached to instances created in the specified subnet should be assigned a customer-owned IPv4 address.

When this value is true, you must specify the customer-owned IP pool using CustomerOwnedIpv4Pool.

source

pub fn get_map_customer_owned_ip_on_launch( &self ) -> &Option<AttributeBooleanValue>

Specify true to indicate that network interfaces attached to instances created in the specified subnet should be assigned a customer-owned IPv4 address.

When this value is true, you must specify the customer-owned IP pool using CustomerOwnedIpv4Pool.

source

pub fn customer_owned_ipv4_pool(self, input: impl Into<String>) -> Self

The customer-owned IPv4 address pool associated with the subnet.

You must set this value when you specify true for MapCustomerOwnedIpOnLaunch.

source

pub fn set_customer_owned_ipv4_pool(self, input: Option<String>) -> Self

The customer-owned IPv4 address pool associated with the subnet.

You must set this value when you specify true for MapCustomerOwnedIpOnLaunch.

source

pub fn get_customer_owned_ipv4_pool(&self) -> &Option<String>

The customer-owned IPv4 address pool associated with the subnet.

You must set this value when you specify true for MapCustomerOwnedIpOnLaunch.

source

pub fn enable_dns64(self, input: AttributeBooleanValue) -> Self

Indicates whether DNS queries made to the Amazon-provided DNS Resolver in this subnet should return synthetic IPv6 addresses for IPv4-only destinations.

source

pub fn set_enable_dns64(self, input: Option<AttributeBooleanValue>) -> Self

Indicates whether DNS queries made to the Amazon-provided DNS Resolver in this subnet should return synthetic IPv6 addresses for IPv4-only destinations.

source

pub fn get_enable_dns64(&self) -> &Option<AttributeBooleanValue>

Indicates whether DNS queries made to the Amazon-provided DNS Resolver in this subnet should return synthetic IPv6 addresses for IPv4-only destinations.

source

pub fn private_dns_hostname_type_on_launch(self, input: HostnameType) -> Self

The type of hostname to assign to instances in the subnet at launch. For IPv4-only and dual-stack (IPv4 and IPv6) subnets, an instance DNS name can be based on the instance IPv4 address (ip-name) or the instance ID (resource-name). For IPv6 only subnets, an instance DNS name must be based on the instance ID (resource-name).

source

pub fn set_private_dns_hostname_type_on_launch( self, input: Option<HostnameType> ) -> Self

The type of hostname to assign to instances in the subnet at launch. For IPv4-only and dual-stack (IPv4 and IPv6) subnets, an instance DNS name can be based on the instance IPv4 address (ip-name) or the instance ID (resource-name). For IPv6 only subnets, an instance DNS name must be based on the instance ID (resource-name).

source

pub fn get_private_dns_hostname_type_on_launch(&self) -> &Option<HostnameType>

The type of hostname to assign to instances in the subnet at launch. For IPv4-only and dual-stack (IPv4 and IPv6) subnets, an instance DNS name can be based on the instance IPv4 address (ip-name) or the instance ID (resource-name). For IPv6 only subnets, an instance DNS name must be based on the instance ID (resource-name).

source

pub fn enable_resource_name_dns_a_record_on_launch( self, input: AttributeBooleanValue ) -> Self

Indicates whether to respond to DNS queries for instance hostnames with DNS A records.

source

pub fn set_enable_resource_name_dns_a_record_on_launch( self, input: Option<AttributeBooleanValue> ) -> Self

Indicates whether to respond to DNS queries for instance hostnames with DNS A records.

source

pub fn get_enable_resource_name_dns_a_record_on_launch( &self ) -> &Option<AttributeBooleanValue>

Indicates whether to respond to DNS queries for instance hostnames with DNS A records.

source

pub fn enable_resource_name_dns_aaaa_record_on_launch( self, input: AttributeBooleanValue ) -> Self

Indicates whether to respond to DNS queries for instance hostnames with DNS AAAA records.

source

pub fn set_enable_resource_name_dns_aaaa_record_on_launch( self, input: Option<AttributeBooleanValue> ) -> Self

Indicates whether to respond to DNS queries for instance hostnames with DNS AAAA records.

source

pub fn get_enable_resource_name_dns_aaaa_record_on_launch( &self ) -> &Option<AttributeBooleanValue>

Indicates whether to respond to DNS queries for instance hostnames with DNS AAAA records.

source

pub fn enable_lni_at_device_index(self, input: i32) -> Self

Indicates the device position for local network interfaces in this subnet. For example, 1 indicates local network interfaces in this subnet are the secondary network interface (eth1). A local network interface cannot be the primary network interface (eth0).

source

pub fn set_enable_lni_at_device_index(self, input: Option<i32>) -> Self

Indicates the device position for local network interfaces in this subnet. For example, 1 indicates local network interfaces in this subnet are the secondary network interface (eth1). A local network interface cannot be the primary network interface (eth0).

source

pub fn get_enable_lni_at_device_index(&self) -> &Option<i32>

Indicates the device position for local network interfaces in this subnet. For example, 1 indicates local network interfaces in this subnet are the secondary network interface (eth1). A local network interface cannot be the primary network interface (eth0).

source

pub fn disable_lni_at_device_index(self, input: AttributeBooleanValue) -> Self

Specify true to indicate that local network interfaces at the current position should be disabled.

source

pub fn set_disable_lni_at_device_index( self, input: Option<AttributeBooleanValue> ) -> Self

Specify true to indicate that local network interfaces at the current position should be disabled.

source

pub fn get_disable_lni_at_device_index(&self) -> &Option<AttributeBooleanValue>

Specify true to indicate that local network interfaces at the current position should be disabled.

Trait Implementations§

source§

impl Clone for ModifySubnetAttributeFluentBuilder

source§

fn clone(&self) -> ModifySubnetAttributeFluentBuilder

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for ModifySubnetAttributeFluentBuilder

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> Same<T> for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for Twhere T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more