Struct aws_sdk_ec2::operation::create_subnet::builders::CreateSubnetFluentBuilder

pub struct CreateSubnetFluentBuilder { /* private fields */ }

Fluent builder constructing a request to CreateSubnet.

Creates a subnet in the specified VPC. For an IPv4 only subnet, specify an IPv4 CIDR block. If the VPC has an IPv6 CIDR block, you can create an IPv6 only subnet or a dual stack subnet instead. For an IPv6 only subnet, specify an IPv6 CIDR block. For a dual stack subnet, specify both an IPv4 CIDR block and an IPv6 CIDR block.

A subnet CIDR block must not overlap the CIDR block of an existing subnet in the VPC. After you create a subnet, you can't change its CIDR block.

The allowed size for an IPv4 subnet is between a /28 netmask (16 IP addresses) and a /16 netmask (65,536 IP addresses). Amazon Web Services reserves both the first four and the last IPv4 address in each subnet's CIDR block. They're not available for your use.

If you've associated an IPv6 CIDR block with your VPC, you can associate an IPv6 CIDR block with a subnet when you create it. The allowed block size for an IPv6 subnet is a /64 netmask.

If you add more than one subnet to a VPC, they're set up in a star topology with a logical router in the middle.

When you stop an instance in a subnet, it retains its private IPv4 address. It's therefore possible to have a subnet with no running instances (they're all stopped), but no remaining IP addresses available.

For more information, see Subnets in the Amazon VPC User Guide.

Implementations

impl CreateSubnetFluentBuilder

pub fn as_input(&self) -> &CreateSubnetInputBuilder

Access the CreateSubnet as a reference.

pub async fn send( self ) -> Result<CreateSubnetOutput, SdkError<CreateSubnetError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub async fn customize( self ) -> Result<CustomizableOperation<CreateSubnetOutput, CreateSubnetError>, SdkError<CreateSubnetError>>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn tag_specifications(self, input: TagSpecification) -> Self

Appends an item to TagSpecifications.

To override the contents of this collection use set_tag_specifications.

The tags to assign to the subnet.

pub fn set_tag_specifications( self, input: Option<Vec<TagSpecification>> ) -> Self

The tags to assign to the subnet.

pub fn get_tag_specifications(&self) -> &Option<Vec<TagSpecification>>

The tags to assign to the subnet.

pub fn availability_zone(self, input: impl Into<String>) -> Self

The Availability Zone or Local Zone for the subnet.

Default: Amazon Web Services selects one for you. If you create more than one subnet in your VPC, we do not necessarily select a different zone for each subnet.

To create a subnet in a Local Zone, set this value to the Local Zone ID, for example us-west-2-lax-1a. For information about the Regions that support Local Zones, see Local Zones locations.

To create a subnet in an Outpost, set this value to the Availability Zone for the Outpost and specify the Outpost ARN.

pub fn set_availability_zone(self, input: Option<String>) -> Self

The Availability Zone or Local Zone for the subnet.

Default: Amazon Web Services selects one for you. If you create more than one subnet in your VPC, we do not necessarily select a different zone for each subnet.

To create a subnet in a Local Zone, set this value to the Local Zone ID, for example us-west-2-lax-1a. For information about the Regions that support Local Zones, see Local Zones locations.

To create a subnet in an Outpost, set this value to the Availability Zone for the Outpost and specify the Outpost ARN.

pub fn get_availability_zone(&self) -> &Option<String>

The Availability Zone or Local Zone for the subnet.

Default: Amazon Web Services selects one for you. If you create more than one subnet in your VPC, we do not necessarily select a different zone for each subnet.

To create a subnet in a Local Zone, set this value to the Local Zone ID, for example us-west-2-lax-1a. For information about the Regions that support Local Zones, see Local Zones locations.

To create a subnet in an Outpost, set this value to the Availability Zone for the Outpost and specify the Outpost ARN.

pub fn availability_zone_id(self, input: impl Into<String>) -> Self

The AZ ID or the Local Zone ID of the subnet.

pub fn set_availability_zone_id(self, input: Option<String>) -> Self

The AZ ID or the Local Zone ID of the subnet.

pub fn get_availability_zone_id(&self) -> &Option<String>

The AZ ID or the Local Zone ID of the subnet.

pub fn cidr_block(self, input: impl Into<String>) -> Self

The IPv4 network range for the subnet, in CIDR notation. For example, 10.0.0.0/24. We modify the specified CIDR block to its canonical form; for example, if you specify 100.68.0.18/18, we modify it to 100.68.0.0/18.

This parameter is not supported for an IPv6 only subnet.

pub fn set_cidr_block(self, input: Option<String>) -> Self

The IPv4 network range for the subnet, in CIDR notation. For example, 10.0.0.0/24. We modify the specified CIDR block to its canonical form; for example, if you specify 100.68.0.18/18, we modify it to 100.68.0.0/18.

This parameter is not supported for an IPv6 only subnet.

pub fn get_cidr_block(&self) -> &Option<String>

The IPv4 network range for the subnet, in CIDR notation. For example, 10.0.0.0/24. We modify the specified CIDR block to its canonical form; for example, if you specify 100.68.0.18/18, we modify it to 100.68.0.0/18.

This parameter is not supported for an IPv6 only subnet.

pub fn ipv6_cidr_block(self, input: impl Into<String>) -> Self

The IPv6 network range for the subnet, in CIDR notation. The subnet size must use a /64 prefix length.

This parameter is required for an IPv6 only subnet.

pub fn set_ipv6_cidr_block(self, input: Option<String>) -> Self

The IPv6 network range for the subnet, in CIDR notation. The subnet size must use a /64 prefix length.

This parameter is required for an IPv6 only subnet.

pub fn get_ipv6_cidr_block(&self) -> &Option<String>

The IPv6 network range for the subnet, in CIDR notation. The subnet size must use a /64 prefix length.

This parameter is required for an IPv6 only subnet.

pub fn outpost_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the Outpost. If you specify an Outpost ARN, you must also specify the Availability Zone of the Outpost subnet.

pub fn set_outpost_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the Outpost. If you specify an Outpost ARN, you must also specify the Availability Zone of the Outpost subnet.

pub fn get_outpost_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the Outpost. If you specify an Outpost ARN, you must also specify the Availability Zone of the Outpost subnet.

pub fn vpc_id(self, input: impl Into<String>) -> Self

The ID of the VPC.

pub fn set_vpc_id(self, input: Option<String>) -> Self

The ID of the VPC.

pub fn get_vpc_id(&self) -> &Option<String>

The ID of the VPC.

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn get_dry_run(&self) -> &Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn ipv6_native(self, input: bool) -> Self

Indicates whether to create an IPv6 only subnet.

pub fn set_ipv6_native(self, input: Option<bool>) -> Self

Indicates whether to create an IPv6 only subnet.

pub fn get_ipv6_native(&self) -> &Option<bool>

Indicates whether to create an IPv6 only subnet.

Trait Implementations

impl Clone for CreateSubnetFluentBuilder

fn clone(&self) -> CreateSubnetFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CreateSubnetFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.