Struct aws_sdk_ec2::operation::describe_instance_status::builders::DescribeInstanceStatusFluentBuilder

pub struct DescribeInstanceStatusFluentBuilder { /* private fields */ }

Fluent builder constructing a request to DescribeInstanceStatus.

Describes the status of the specified instances or all of your instances. By default, only running instances are described, unless you specifically indicate to return the status of all instances.

Instance status includes the following components:

• Status checks - Amazon EC2 performs status checks on running EC2 instances to identify hardware and software issues. For more information, see Status checks for your instances and Troubleshoot instances with failed status checks in the Amazon EC2 User Guide.

• Scheduled events - Amazon EC2 can schedule events (such as reboot, stop, or terminate) for your instances related to hardware issues, software updates, or system maintenance. For more information, see Scheduled events for your instances in the Amazon EC2 User Guide.

• Instance state - You can manage your instances from the moment you launch them through their termination. For more information, see Instance lifecycle in the Amazon EC2 User Guide.

Implementations

impl DescribeInstanceStatusFluentBuilder

pub async fn customize( self ) -> Result<CustomizableOperation<DescribeInstanceStatus, AwsResponseRetryClassifier>, SdkError<DescribeInstanceStatusError>>

Consume this builder, creating a customizable operation that can be modified before being sent. The operation’s inner http::Request can be modified as well.

pub async fn send( self ) -> Result<DescribeInstanceStatusOutput, SdkError<DescribeInstanceStatusError>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn into_paginator(self) -> DescribeInstanceStatusPaginator

Create a paginator for this request

Paginators are used by calling send().await which returns a Stream.

pub fn filters(self, input: Filter) -> Self

Appends an item to Filters.

To override the contents of this collection use set_filters.

The filters.

• availability-zone - The Availability Zone of the instance.

• event.code - The code for the scheduled event (instance-reboot | system-reboot | system-maintenance | instance-retirement | instance-stop).

• event.description - A description of the event.

• event.instance-event-id - The ID of the event whose date and time you are modifying.

• event.not-after - The latest end time for the scheduled event (for example, 2014-09-15T17:15:20.000Z).

• event.not-before - The earliest start time for the scheduled event (for example, 2014-09-15T17:15:20.000Z).

• event.not-before-deadline - The deadline for starting the event (for example, 2014-09-15T17:15:20.000Z).

• instance-state-code - The code for the instance state, as a 16-bit unsigned integer. The high byte is used for internal purposes and should be ignored. The low byte is set based on the state represented. The valid values are 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), and 80 (stopped).

• instance-state-name - The state of the instance (pending | running | shutting-down | terminated | stopping | stopped).

• instance-status.reachability - Filters on instance status where the name is reachability (passed | failed | initializing | insufficient-data).

• instance-status.status - The status of the instance (ok | impaired | initializing | insufficient-data | not-applicable).

• system-status.reachability - Filters on system status where the name is reachability (passed | failed | initializing | insufficient-data).

• system-status.status - The system status of the instance (ok | impaired | initializing | insufficient-data | not-applicable).

pub fn set_filters(self, input: Option<Vec<Filter>>) -> Self

The filters.

• availability-zone - The Availability Zone of the instance.

• event.code - The code for the scheduled event (instance-reboot | system-reboot | system-maintenance | instance-retirement | instance-stop).

• event.description - A description of the event.

• event.instance-event-id - The ID of the event whose date and time you are modifying.

• event.not-after - The latest end time for the scheduled event (for example, 2014-09-15T17:15:20.000Z).

• event.not-before - The earliest start time for the scheduled event (for example, 2014-09-15T17:15:20.000Z).

• event.not-before-deadline - The deadline for starting the event (for example, 2014-09-15T17:15:20.000Z).

• instance-state-code - The code for the instance state, as a 16-bit unsigned integer. The high byte is used for internal purposes and should be ignored. The low byte is set based on the state represented. The valid values are 0 (pending), 16 (running), 32 (shutting-down), 48 (terminated), 64 (stopping), and 80 (stopped).

• instance-state-name - The state of the instance (pending | running | shutting-down | terminated | stopping | stopped).

• instance-status.reachability - Filters on instance status where the name is reachability (passed | failed | initializing | insufficient-data).

• instance-status.status - The status of the instance (ok | impaired | initializing | insufficient-data | not-applicable).

• system-status.reachability - Filters on system status where the name is reachability (passed | failed | initializing | insufficient-data).

• system-status.status - The system status of the instance (ok | impaired | initializing | insufficient-data | not-applicable).

pub fn instance_ids(self, input: impl Into<String>) -> Self

Appends an item to InstanceIds.

To override the contents of this collection use set_instance_ids.

The instance IDs.

Default: Describes all your instances.

Constraints: Maximum 100 explicitly specified instance IDs.

pub fn set_instance_ids(self, input: Option<Vec<String>>) -> Self

The instance IDs.

Default: Describes all your instances.

Constraints: Maximum 100 explicitly specified instance IDs.

pub fn max_results(self, input: i32) -> Self

The maximum number of items to return for this request. To get the next page of items, make another request with the token returned in the output. For more information, see Pagination.

You cannot specify this parameter and the instance IDs parameter in the same request.

pub fn set_max_results(self, input: Option<i32>) -> Self

The maximum number of items to return for this request. To get the next page of items, make another request with the token returned in the output. For more information, see Pagination.

You cannot specify this parameter and the instance IDs parameter in the same request.

pub fn next_token(self, input: impl Into<String>) -> Self

The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.

pub fn set_next_token(self, input: Option<String>) -> Self

The token returned from a previous paginated request. Pagination continues from the end of the items returned by the previous request.

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn include_all_instances(self, input: bool) -> Self

When true, includes the health status for all instances. When false, includes the health status for running instances only.

Default: false

pub fn set_include_all_instances(self, input: Option<bool>) -> Self

When true, includes the health status for all instances. When false, includes the health status for running instances only.

Default: false

Trait Implementations

impl Clone for DescribeInstanceStatusFluentBuilder

fn clone(&self) -> DescribeInstanceStatusFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for DescribeInstanceStatusFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.