Struct aws_sdk_ec2::client::fluent_builders::RevokeSecurityGroupIngress

pub struct RevokeSecurityGroupIngress { /* private fields */ }

Fluent builder constructing a request to RevokeSecurityGroupIngress.

Removes the specified inbound (ingress) rules from a security group.

You can specify rules using either rule IDs or security group rule properties. If you use rule properties, the values that you specify (for example, ports) must match the existing rule's values exactly. Each rule has a protocol, from and to ports, and source (CIDR range, security group, or prefix list). For the TCP and UDP protocols, you must also specify the destination port or range of ports. For the ICMP protocol, you must also specify the ICMP type and code. If the security group rule has a description, you do not need to specify the description to revoke the rule.

[EC2-Classic, default VPC] If the values you specify do not match the existing rule's values, no error is returned, and the output describes the security group rules that were not revoked.

Amazon Web Services recommends that you describe the security group to verify that the rules were removed.

Rule changes are propagated to instances within the security group as quickly as possible. However, a small delay might occur.

We are retiring EC2-Classic. We recommend that you migrate from EC2-Classic to a VPC. For more information, see Migrate from EC2-Classic to a VPC in the Amazon Elastic Compute Cloud User Guide.

Implementations

impl RevokeSecurityGroupIngress

pub async fn customize(
    self
) -> Result<CustomizableOperation<RevokeSecurityGroupIngress, AwsResponseRetryClassifier>, SdkError<RevokeSecurityGroupIngressError>>

Consume this builder, creating a customizable operation that can be modified before being sent. The operation’s inner http::Request can be modified as well.

pub async fn send(
    self
) -> Result<RevokeSecurityGroupIngressOutput, SdkError<RevokeSecurityGroupIngressError>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn cidr_ip(self, input: impl Into<String>) -> Self

The CIDR IP address range. You can't specify this parameter when specifying a source security group.

pub fn set_cidr_ip(self, input: Option<String>) -> Self

The CIDR IP address range. You can't specify this parameter when specifying a source security group.

pub fn from_port(self, input: i32) -> Self

If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP, this is the type number. A value of -1 indicates all ICMP types.

pub fn set_from_port(self, input: Option<i32>) -> Self

If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP, this is the type number. A value of -1 indicates all ICMP types.

pub fn group_id(self, input: impl Into<String>) -> Self

The ID of the security group. You must specify either the security group ID or the security group name in the request. For security groups in a nondefault VPC, you must specify the security group ID.

pub fn set_group_id(self, input: Option<String>) -> Self

The ID of the security group. You must specify either the security group ID or the security group name in the request. For security groups in a nondefault VPC, you must specify the security group ID.

pub fn group_name(self, input: impl Into<String>) -> Self

[EC2-Classic, default VPC] The name of the security group. You must specify either the security group ID or the security group name in the request. For security groups in a nondefault VPC, you must specify the security group ID.

pub fn set_group_name(self, input: Option<String>) -> Self

[EC2-Classic, default VPC] The name of the security group. You must specify either the security group ID or the security group name in the request. For security groups in a nondefault VPC, you must specify the security group ID.

pub fn ip_permissions(self, input: IpPermission) -> Self

Appends an item to IpPermissions.

To override the contents of this collection use set_ip_permissions.

The sets of IP permissions. You can't specify a source security group and a CIDR IP address range in the same set of permissions.

pub fn set_ip_permissions(self, input: Option<Vec<IpPermission>>) -> Self

The sets of IP permissions. You can't specify a source security group and a CIDR IP address range in the same set of permissions.

pub fn ip_protocol(self, input: impl Into<String>) -> Self

The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers). Use -1 to specify all.

pub fn set_ip_protocol(self, input: Option<String>) -> Self

The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers). Use -1 to specify all.

pub fn source_security_group_name(self, input: impl Into<String>) -> Self

[EC2-Classic, default VPC] The name of the source security group. You can't specify this parameter in combination with the following parameters: the CIDR IP address range, the start of the port range, the IP protocol, and the end of the port range. For EC2-VPC, the source security group must be in the same VPC. To revoke a specific rule for an IP protocol and port range, use a set of IP permissions instead.

pub fn set_source_security_group_name(self, input: Option<String>) -> Self

[EC2-Classic, default VPC] The name of the source security group. You can't specify this parameter in combination with the following parameters: the CIDR IP address range, the start of the port range, the IP protocol, and the end of the port range. For EC2-VPC, the source security group must be in the same VPC. To revoke a specific rule for an IP protocol and port range, use a set of IP permissions instead.

pub fn source_security_group_owner_id(self, input: impl Into<String>) -> Self

[EC2-Classic] The Amazon Web Services account ID of the source security group, if the source security group is in a different account. You can't specify this parameter in combination with the following parameters: the CIDR IP address range, the IP protocol, the start of the port range, and the end of the port range. To revoke a specific rule for an IP protocol and port range, use a set of IP permissions instead.

pub fn set_source_security_group_owner_id(self, input: Option<String>) -> Self

[EC2-Classic] The Amazon Web Services account ID of the source security group, if the source security group is in a different account. You can't specify this parameter in combination with the following parameters: the CIDR IP address range, the IP protocol, the start of the port range, and the end of the port range. To revoke a specific rule for an IP protocol and port range, use a set of IP permissions instead.

pub fn to_port(self, input: i32) -> Self

If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP, this is the code. A value of -1 indicates all ICMP codes.

pub fn set_to_port(self, input: Option<i32>) -> Self

If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP, this is the code. A value of -1 indicates all ICMP codes.

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn security_group_rule_ids(self, input: impl Into<String>) -> Self

Appends an item to SecurityGroupRuleIds.

To override the contents of this collection use set_security_group_rule_ids.

The IDs of the security group rules.

pub fn set_security_group_rule_ids(self, input: Option<Vec<String>>) -> Self

The IDs of the security group rules.

Trait Implementations

impl Clone for RevokeSecurityGroupIngress

fn clone(&self) -> RevokeSecurityGroupIngress

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for RevokeSecurityGroupIngress

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.