Struct aws_sdk_ec2::client::fluent_builders::DescribeSecurityGroups

pub struct DescribeSecurityGroups { /* private fields */ }

Fluent builder constructing a request to DescribeSecurityGroups.

Describes the specified security groups or all of your security groups.

A security group is for use with instances either in the EC2-Classic platform or in a specific VPC. For more information, see Amazon EC2 security groups in the Amazon Elastic Compute Cloud User Guide and Security groups for your VPC in the Amazon Virtual Private Cloud User Guide.

We are retiring EC2-Classic. We recommend that you migrate from EC2-Classic to a VPC. For more information, see Migrate from EC2-Classic to a VPC in the Amazon Elastic Compute Cloud User Guide.

Implementations

impl DescribeSecurityGroups

pub async fn customize(
    self
) -> Result<CustomizableOperation<DescribeSecurityGroups, AwsResponseRetryClassifier>, SdkError<DescribeSecurityGroupsError>>

Consume this builder, creating a customizable operation that can be modified before being sent. The operation’s inner http::Request can be modified as well.

pub async fn send(
    self
) -> Result<DescribeSecurityGroupsOutput, SdkError<DescribeSecurityGroupsError>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn into_paginator(self) -> DescribeSecurityGroupsPaginator

Create a paginator for this request

Paginators are used by calling send().await which returns a Stream.

pub fn filters(self, input: Filter) -> Self

Appends an item to Filters.

To override the contents of this collection use set_filters.

The filters. If using multiple filters for rules, the results include security groups for which any combination of rules - not necessarily a single rule - match all filters.

• description - The description of the security group.

• egress.ip-permission.cidr - An IPv4 CIDR block for an outbound security group rule.

• egress.ip-permission.from-port - For an outbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.

• egress.ip-permission.group-id - The ID of a security group that has been referenced in an outbound security group rule.

• egress.ip-permission.group-name - The name of a security group that is referenced in an outbound security group rule.

• egress.ip-permission.ipv6-cidr - An IPv6 CIDR block for an outbound security group rule.

• egress.ip-permission.prefix-list-id - The ID of a prefix list to which a security group rule allows outbound access.

• egress.ip-permission.protocol - The IP protocol for an outbound security group rule (tcp | udp | icmp, a protocol number, or -1 for all protocols).

• egress.ip-permission.to-port - For an outbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.

• egress.ip-permission.user-id - The ID of an Amazon Web Services account that has been referenced in an outbound security group rule.

• group-id - The ID of the security group.

• group-name - The name of the security group.

• ip-permission.cidr - An IPv4 CIDR block for an inbound security group rule.

• ip-permission.from-port - For an inbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.

• ip-permission.group-id - The ID of a security group that has been referenced in an inbound security group rule.

• ip-permission.group-name - The name of a security group that is referenced in an inbound security group rule.

• ip-permission.ipv6-cidr - An IPv6 CIDR block for an inbound security group rule.

• ip-permission.prefix-list-id - The ID of a prefix list from which a security group rule allows inbound access.

• ip-permission.protocol - The IP protocol for an inbound security group rule (tcp | udp | icmp, a protocol number, or -1 for all protocols).

• ip-permission.to-port - For an inbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.

• ip-permission.user-id - The ID of an Amazon Web Services account that has been referenced in an inbound security group rule.

• owner-id - The Amazon Web Services account ID of the owner of the security group.

• tag: - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.

• tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.

• vpc-id - The ID of the VPC specified when the security group was created.

pub fn set_filters(self, input: Option<Vec<Filter>>) -> Self

The filters. If using multiple filters for rules, the results include security groups for which any combination of rules - not necessarily a single rule - match all filters.

• description - The description of the security group.

• egress.ip-permission.cidr - An IPv4 CIDR block for an outbound security group rule.

• egress.ip-permission.from-port - For an outbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.

• egress.ip-permission.group-id - The ID of a security group that has been referenced in an outbound security group rule.

• egress.ip-permission.group-name - The name of a security group that is referenced in an outbound security group rule.

• egress.ip-permission.ipv6-cidr - An IPv6 CIDR block for an outbound security group rule.

• egress.ip-permission.prefix-list-id - The ID of a prefix list to which a security group rule allows outbound access.

• egress.ip-permission.protocol - The IP protocol for an outbound security group rule (tcp | udp | icmp, a protocol number, or -1 for all protocols).

• egress.ip-permission.to-port - For an outbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.

• egress.ip-permission.user-id - The ID of an Amazon Web Services account that has been referenced in an outbound security group rule.

• group-id - The ID of the security group.

• group-name - The name of the security group.

• ip-permission.cidr - An IPv4 CIDR block for an inbound security group rule.

• ip-permission.from-port - For an inbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.

• ip-permission.group-id - The ID of a security group that has been referenced in an inbound security group rule.

• ip-permission.group-name - The name of a security group that is referenced in an inbound security group rule.

• ip-permission.ipv6-cidr - An IPv6 CIDR block for an inbound security group rule.

• ip-permission.prefix-list-id - The ID of a prefix list from which a security group rule allows inbound access.

• ip-permission.protocol - The IP protocol for an inbound security group rule (tcp | udp | icmp, a protocol number, or -1 for all protocols).

• ip-permission.to-port - For an inbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.

• ip-permission.user-id - The ID of an Amazon Web Services account that has been referenced in an inbound security group rule.

• owner-id - The Amazon Web Services account ID of the owner of the security group.

• tag: - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.

• tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.

• vpc-id - The ID of the VPC specified when the security group was created.

pub fn group_ids(self, input: impl Into<String>) -> Self

Appends an item to GroupIds.

To override the contents of this collection use set_group_ids.

The IDs of the security groups. Required for security groups in a nondefault VPC.

Default: Describes all of your security groups.

pub fn set_group_ids(self, input: Option<Vec<String>>) -> Self

The IDs of the security groups. Required for security groups in a nondefault VPC.

Default: Describes all of your security groups.

pub fn group_names(self, input: impl Into<String>) -> Self

Appends an item to GroupNames.

To override the contents of this collection use set_group_names.

[EC2-Classic and default VPC only] The names of the security groups. You can specify either the security group name or the security group ID. For security groups in a nondefault VPC, use the group-name filter to describe security groups by name.

Default: Describes all of your security groups.

pub fn set_group_names(self, input: Option<Vec<String>>) -> Self

[EC2-Classic and default VPC only] The names of the security groups. You can specify either the security group name or the security group ID. For security groups in a nondefault VPC, use the group-name filter to describe security groups by name.

Default: Describes all of your security groups.

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn next_token(self, input: impl Into<String>) -> Self

The token to request the next page of results.

pub fn set_next_token(self, input: Option<String>) -> Self

The token to request the next page of results.

pub fn max_results(self, input: i32) -> Self

The maximum number of results to return in a single call. To retrieve the remaining results, make another request with the returned NextToken value. This value can be between 5 and 1000. If this parameter is not specified, then all results are returned.

pub fn set_max_results(self, input: Option<i32>) -> Self

The maximum number of results to return in a single call. To retrieve the remaining results, make another request with the returned NextToken value. This value can be between 5 and 1000. If this parameter is not specified, then all results are returned.

Trait Implementations

impl Clone for DescribeSecurityGroups

fn clone(&self) -> DescribeSecurityGroups

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for DescribeSecurityGroups

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.