Struct aws_sdk_ec2::client::fluent_builders::CreateNetworkInterface

pub struct CreateNetworkInterface { /* private fields */ }

Fluent builder constructing a request to CreateNetworkInterface.

Creates a network interface in the specified subnet.

The number of IP addresses you can assign to a network interface varies by instance type. For more information, see IP Addresses Per ENI Per Instance Type in the Amazon Virtual Private Cloud User Guide.

For more information about network interfaces, see Elastic network interfaces in the Amazon Elastic Compute Cloud User Guide.

Implementations

impl CreateNetworkInterface

pub async fn customize(
    self
) -> Result<CustomizableOperation<CreateNetworkInterface, AwsResponseRetryClassifier>, SdkError<CreateNetworkInterfaceError>>

Consume this builder, creating a customizable operation that can be modified before being sent. The operation’s inner http::Request can be modified as well.

pub async fn send(
    self
) -> Result<CreateNetworkInterfaceOutput, SdkError<CreateNetworkInterfaceError>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn description(self, input: impl Into<String>) -> Self

A description for the network interface.

pub fn set_description(self, input: Option<String>) -> Self

A description for the network interface.

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn groups(self, input: impl Into<String>) -> Self

Appends an item to Groups.

To override the contents of this collection use set_groups.

The IDs of one or more security groups.

pub fn set_groups(self, input: Option<Vec<String>>) -> Self

The IDs of one or more security groups.

pub fn ipv6_address_count(self, input: i32) -> Self

The number of IPv6 addresses to assign to a network interface. Amazon EC2 automatically selects the IPv6 addresses from the subnet range.

You can't specify a count of IPv6 addresses using this parameter if you've specified one of the following: specific IPv6 addresses, specific IPv6 prefixes, or a count of IPv6 prefixes.

If your subnet has the AssignIpv6AddressOnCreation attribute set, you can override that setting by specifying 0 as the IPv6 address count.

pub fn set_ipv6_address_count(self, input: Option<i32>) -> Self

The number of IPv6 addresses to assign to a network interface. Amazon EC2 automatically selects the IPv6 addresses from the subnet range.

You can't specify a count of IPv6 addresses using this parameter if you've specified one of the following: specific IPv6 addresses, specific IPv6 prefixes, or a count of IPv6 prefixes.

If your subnet has the AssignIpv6AddressOnCreation attribute set, you can override that setting by specifying 0 as the IPv6 address count.

pub fn ipv6_addresses(self, input: InstanceIpv6Address) -> Self

Appends an item to Ipv6Addresses.

To override the contents of this collection use set_ipv6_addresses.

The IPv6 addresses from the IPv6 CIDR block range of your subnet.

You can't specify IPv6 addresses using this parameter if you've specified one of the following: a count of IPv6 addresses, specific IPv6 prefixes, or a count of IPv6 prefixes.

pub fn set_ipv6_addresses(self, input: Option<Vec<InstanceIpv6Address>>) -> Self

The IPv6 addresses from the IPv6 CIDR block range of your subnet.

You can't specify IPv6 addresses using this parameter if you've specified one of the following: a count of IPv6 addresses, specific IPv6 prefixes, or a count of IPv6 prefixes.

pub fn private_ip_address(self, input: impl Into<String>) -> Self

The primary private IPv4 address of the network interface. If you don't specify an IPv4 address, Amazon EC2 selects one for you from the subnet's IPv4 CIDR range. If you specify an IP address, you cannot indicate any IP addresses specified in privateIpAddresses as primary (only one IP address can be designated as primary).

pub fn set_private_ip_address(self, input: Option<String>) -> Self

The primary private IPv4 address of the network interface. If you don't specify an IPv4 address, Amazon EC2 selects one for you from the subnet's IPv4 CIDR range. If you specify an IP address, you cannot indicate any IP addresses specified in privateIpAddresses as primary (only one IP address can be designated as primary).

pub fn private_ip_addresses(self, input: PrivateIpAddressSpecification) -> Self

Appends an item to PrivateIpAddresses.

To override the contents of this collection use set_private_ip_addresses.

The private IPv4 addresses.

You can't specify private IPv4 addresses if you've specified one of the following: a count of private IPv4 addresses, specific IPv4 prefixes, or a count of IPv4 prefixes.

pub fn set_private_ip_addresses(
    self,
    input: Option<Vec<PrivateIpAddressSpecification>>
) -> Self

The private IPv4 addresses.

You can't specify private IPv4 addresses if you've specified one of the following: a count of private IPv4 addresses, specific IPv4 prefixes, or a count of IPv4 prefixes.

pub fn secondary_private_ip_address_count(self, input: i32) -> Self

The number of secondary private IPv4 addresses to assign to a network interface. When you specify a number of secondary IPv4 addresses, Amazon EC2 selects these IP addresses within the subnet's IPv4 CIDR range. You can't specify this option and specify more than one private IP address using privateIpAddresses.

You can't specify a count of private IPv4 addresses if you've specified one of the following: specific private IPv4 addresses, specific IPv4 prefixes, or a count of IPv4 prefixes.

pub fn set_secondary_private_ip_address_count(self, input: Option<i32>) -> Self

The number of secondary private IPv4 addresses to assign to a network interface. When you specify a number of secondary IPv4 addresses, Amazon EC2 selects these IP addresses within the subnet's IPv4 CIDR range. You can't specify this option and specify more than one private IP address using privateIpAddresses.

You can't specify a count of private IPv4 addresses if you've specified one of the following: specific private IPv4 addresses, specific IPv4 prefixes, or a count of IPv4 prefixes.

pub fn ipv4_prefixes(self, input: Ipv4PrefixSpecificationRequest) -> Self

Appends an item to Ipv4Prefixes.

To override the contents of this collection use set_ipv4_prefixes.

The IPv4 prefixes assigned to the network interface.

You can't specify IPv4 prefixes if you've specified one of the following: a count of IPv4 prefixes, specific private IPv4 addresses, or a count of private IPv4 addresses.

pub fn set_ipv4_prefixes(
    self,
    input: Option<Vec<Ipv4PrefixSpecificationRequest>>
) -> Self

The IPv4 prefixes assigned to the network interface.

You can't specify IPv4 prefixes if you've specified one of the following: a count of IPv4 prefixes, specific private IPv4 addresses, or a count of private IPv4 addresses.

pub fn ipv4_prefix_count(self, input: i32) -> Self

The number of IPv4 prefixes that Amazon Web Services automatically assigns to the network interface.

You can't specify a count of IPv4 prefixes if you've specified one of the following: specific IPv4 prefixes, specific private IPv4 addresses, or a count of private IPv4 addresses.

pub fn set_ipv4_prefix_count(self, input: Option<i32>) -> Self

The number of IPv4 prefixes that Amazon Web Services automatically assigns to the network interface.

You can't specify a count of IPv4 prefixes if you've specified one of the following: specific IPv4 prefixes, specific private IPv4 addresses, or a count of private IPv4 addresses.

pub fn ipv6_prefixes(self, input: Ipv6PrefixSpecificationRequest) -> Self

Appends an item to Ipv6Prefixes.

To override the contents of this collection use set_ipv6_prefixes.

The IPv6 prefixes assigned to the network interface.

You can't specify IPv6 prefixes if you've specified one of the following: a count of IPv6 prefixes, specific IPv6 addresses, or a count of IPv6 addresses.

pub fn set_ipv6_prefixes(
    self,
    input: Option<Vec<Ipv6PrefixSpecificationRequest>>
) -> Self

The IPv6 prefixes assigned to the network interface.

You can't specify IPv6 prefixes if you've specified one of the following: a count of IPv6 prefixes, specific IPv6 addresses, or a count of IPv6 addresses.

pub fn ipv6_prefix_count(self, input: i32) -> Self

The number of IPv6 prefixes that Amazon Web Services automatically assigns to the network interface.

You can't specify a count of IPv6 prefixes if you've specified one of the following: specific IPv6 prefixes, specific IPv6 addresses, or a count of IPv6 addresses.

pub fn set_ipv6_prefix_count(self, input: Option<i32>) -> Self

The number of IPv6 prefixes that Amazon Web Services automatically assigns to the network interface.

You can't specify a count of IPv6 prefixes if you've specified one of the following: specific IPv6 prefixes, specific IPv6 addresses, or a count of IPv6 addresses.

pub fn interface_type(self, input: NetworkInterfaceCreationType) -> Self

The type of network interface. The default is interface.

The only supported values are efa and trunk.

pub fn set_interface_type(
    self,
    input: Option<NetworkInterfaceCreationType>
) -> Self

The type of network interface. The default is interface.

The only supported values are efa and trunk.

pub fn subnet_id(self, input: impl Into<String>) -> Self

The ID of the subnet to associate with the network interface.

pub fn set_subnet_id(self, input: Option<String>) -> Self

The ID of the subnet to associate with the network interface.

pub fn tag_specifications(self, input: TagSpecification) -> Self

Appends an item to TagSpecifications.

To override the contents of this collection use set_tag_specifications.

The tags to apply to the new network interface.

pub fn set_tag_specifications(self, input: Option<Vec<TagSpecification>>) -> Self

The tags to apply to the new network interface.

pub fn client_token(self, input: impl Into<String>) -> Self

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensuring Idempotency.

pub fn set_client_token(self, input: Option<String>) -> Self

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensuring Idempotency.

Trait Implementations

impl Clone for CreateNetworkInterface

fn clone(&self) -> CreateNetworkInterface

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CreateNetworkInterface

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.