Struct aws_sdk_ec2::input::DescribeVpcsInput

#[non_exhaustive]
pub struct DescribeVpcsInput { /* private fields */ }

Implementations

impl DescribeVpcsInput

pub async fn make_operation(
    &self,
    _config: &Config
) -> Result<Operation<DescribeVpcs, AwsResponseRetryClassifier>, BuildError>

Consumes the builder and constructs an Operation<DescribeVpcs>

Examples found in repository

src/client.rs (line 52546)

        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::operation::customize::CustomizableOperation<
                crate::operation::DescribeVpcs,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DescribeVpcsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            Ok(crate::operation::customize::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DescribeVpcsOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeVpcsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&self.handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            self.handle.client.call(op).await
        }

src/paginator.rs (line 11811)

    pub fn send(
        self,
    ) -> impl tokio_stream::Stream<
        Item = std::result::Result<
            crate::output::DescribeVpcsOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeVpcsError>,
        >,
    > + Unpin {
        // Move individual fields out of self for the borrow checker
        let builder = self.builder;
        let handle = self.handle;
        aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
            Box::pin(async move {
                // Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
                let mut input = match builder
                    .build()
                    .map_err(aws_smithy_http::result::SdkError::construction_failure)
                {
                    Ok(input) => input,
                    Err(e) => {
                        let _ = tx.send(Err(e)).await;
                        return;
                    }
                };
                loop {
                    let op = match input
                        .make_operation(&handle.conf)
                        .await
                        .map_err(aws_smithy_http::result::SdkError::construction_failure)
                    {
                        Ok(op) => op,
                        Err(e) => {
                            let _ = tx.send(Err(e)).await;
                            return;
                        }
                    };
                    let resp = handle.client.call(op).await;
                    // If the input member is None or it was an error
                    let done = match resp {
                        Ok(ref resp) => {
                            let new_token = crate::lens::reflens_structure_crate_output_describe_vpcs_output_next_token(resp);
                            let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
                            if !is_empty
                                && new_token == input.next_token.as_ref()
                                && self.stop_on_duplicate_token
                            {
                                true
                            } else {
                                input.next_token = new_token.cloned();
                                is_empty
                            }
                        }
                        Err(_) => true,
                    };
                    if tx.send(resp).await.is_err() {
                        // receiving end was dropped
                        return;
                    }
                    if done {
                        return;
                    }
                }
            })
        })
    }

pub fn builder() -> Builder

Creates a new builder-style object to manufacture DescribeVpcsInput.

impl DescribeVpcsInput

pub fn filters(&self) -> Option<&[Filter]>

One or more filters.

• cidr - The primary IPv4 CIDR block of the VPC. The CIDR block you specify must exactly match the VPC's CIDR block for information to be returned for the VPC. Must contain the slash followed by one or two digits (for example, /28).

• cidr-block-association.cidr-block - An IPv4 CIDR block associated with the VPC.

• cidr-block-association.association-id - The association ID for an IPv4 CIDR block associated with the VPC.

• cidr-block-association.state - The state of an IPv4 CIDR block associated with the VPC.

• dhcp-options-id - The ID of a set of DHCP options.

• ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated with the VPC.

• ipv6-cidr-block-association.ipv6-pool - The ID of the IPv6 address pool from which the IPv6 CIDR block is allocated.

• ipv6-cidr-block-association.association-id - The association ID for an IPv6 CIDR block associated with the VPC.

• ipv6-cidr-block-association.state - The state of an IPv6 CIDR block associated with the VPC.

• is-default - Indicates whether the VPC is the default VPC.

• owner-id - The ID of the Amazon Web Services account that owns the VPC.

• state - The state of the VPC (pending | available).

• tag: - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.

• tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.

• vpc-id - The ID of the VPC.

pub fn vpc_ids(&self) -> Option<&[String]>

One or more VPC IDs.

Default: Describes all your VPCs.

pub fn dry_run(&self) -> Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn next_token(&self) -> Option<&str>

The token for the next page of results.

pub fn max_results(&self) -> Option<i32>

The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.

Trait Implementations

impl Clone for DescribeVpcsInput

fn clone(&self) -> DescribeVpcsInput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for DescribeVpcsInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq<DescribeVpcsInput> for DescribeVpcsInput

fn eq(&self, other: &DescribeVpcsInput) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for DescribeVpcsInput