Struct aws_sdk_ec2::input::DescribeSecurityGroupsInput

#[non_exhaustive]
pub struct DescribeSecurityGroupsInput { /* private fields */ }

Implementations

impl DescribeSecurityGroupsInput

pub async fn make_operation(
    &self,
    _config: &Config
) -> Result<Operation<DescribeSecurityGroups, AwsResponseRetryClassifier>, BuildError>

Consumes the builder and constructs an Operation<DescribeSecurityGroups>

Examples found in repository

src/client.rs (line 46227)

        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::operation::customize::CustomizableOperation<
                crate::operation::DescribeSecurityGroups,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DescribeSecurityGroupsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            Ok(crate::operation::customize::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DescribeSecurityGroupsOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeSecurityGroupsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&self.handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            self.handle.client.call(op).await
        }

src/paginator.rs (line 7775)

    pub fn send(
        self,
    ) -> impl tokio_stream::Stream<
        Item = std::result::Result<
            crate::output::DescribeSecurityGroupsOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeSecurityGroupsError>,
        >,
    > + Unpin {
        // Move individual fields out of self for the borrow checker
        let builder = self.builder;
        let handle = self.handle;
        aws_smithy_async::future::fn_stream::FnStream::new(move |tx| {
            Box::pin(async move {
                // Build the input for the first time. If required fields are missing, this is where we'll produce an early error.
                let mut input = match builder
                    .build()
                    .map_err(aws_smithy_http::result::SdkError::construction_failure)
                {
                    Ok(input) => input,
                    Err(e) => {
                        let _ = tx.send(Err(e)).await;
                        return;
                    }
                };
                loop {
                    let op = match input
                        .make_operation(&handle.conf)
                        .await
                        .map_err(aws_smithy_http::result::SdkError::construction_failure)
                    {
                        Ok(op) => op,
                        Err(e) => {
                            let _ = tx.send(Err(e)).await;
                            return;
                        }
                    };
                    let resp = handle.client.call(op).await;
                    // If the input member is None or it was an error
                    let done = match resp {
                        Ok(ref resp) => {
                            let new_token = crate::lens::reflens_structure_crate_output_describe_security_groups_output_next_token(resp);
                            let is_empty = new_token.map(|token| token.is_empty()).unwrap_or(true);
                            if !is_empty
                                && new_token == input.next_token.as_ref()
                                && self.stop_on_duplicate_token
                            {
                                true
                            } else {
                                input.next_token = new_token.cloned();
                                is_empty
                            }
                        }
                        Err(_) => true,
                    };
                    if tx.send(resp).await.is_err() {
                        // receiving end was dropped
                        return;
                    }
                    if done {
                        return;
                    }
                }
            })
        })
    }

pub fn builder() -> Builder

Creates a new builder-style object to manufacture DescribeSecurityGroupsInput.

impl DescribeSecurityGroupsInput

pub fn filters(&self) -> Option<&[Filter]>

The filters. If using multiple filters for rules, the results include security groups for which any combination of rules - not necessarily a single rule - match all filters.

• description - The description of the security group.

• egress.ip-permission.cidr - An IPv4 CIDR block for an outbound security group rule.

• egress.ip-permission.from-port - For an outbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.

• egress.ip-permission.group-id - The ID of a security group that has been referenced in an outbound security group rule.

• egress.ip-permission.group-name - The name of a security group that is referenced in an outbound security group rule.

• egress.ip-permission.ipv6-cidr - An IPv6 CIDR block for an outbound security group rule.

• egress.ip-permission.prefix-list-id - The ID of a prefix list to which a security group rule allows outbound access.

• egress.ip-permission.protocol - The IP protocol for an outbound security group rule (tcp | udp | icmp, a protocol number, or -1 for all protocols).

• egress.ip-permission.to-port - For an outbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.

• egress.ip-permission.user-id - The ID of an Amazon Web Services account that has been referenced in an outbound security group rule.

• group-id - The ID of the security group.

• group-name - The name of the security group.

• ip-permission.cidr - An IPv4 CIDR block for an inbound security group rule.

• ip-permission.from-port - For an inbound rule, the start of port range for the TCP and UDP protocols, or an ICMP type number.

• ip-permission.group-id - The ID of a security group that has been referenced in an inbound security group rule.

• ip-permission.group-name - The name of a security group that is referenced in an inbound security group rule.

• ip-permission.ipv6-cidr - An IPv6 CIDR block for an inbound security group rule.

• ip-permission.prefix-list-id - The ID of a prefix list from which a security group rule allows inbound access.

• ip-permission.protocol - The IP protocol for an inbound security group rule (tcp | udp | icmp, a protocol number, or -1 for all protocols).

• ip-permission.to-port - For an inbound rule, the end of port range for the TCP and UDP protocols, or an ICMP code.

• ip-permission.user-id - The ID of an Amazon Web Services account that has been referenced in an inbound security group rule.

• owner-id - The Amazon Web Services account ID of the owner of the security group.

• tag: - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.

• tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.

• vpc-id - The ID of the VPC specified when the security group was created.

pub fn group_ids(&self) -> Option<&[String]>

The IDs of the security groups. Required for security groups in a nondefault VPC.

Default: Describes all of your security groups.

pub fn group_names(&self) -> Option<&[String]>

[EC2-Classic and default VPC only] The names of the security groups. You can specify either the security group name or the security group ID. For security groups in a nondefault VPC, use the group-name filter to describe security groups by name.

Default: Describes all of your security groups.

pub fn dry_run(&self) -> Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn next_token(&self) -> Option<&str>

The token to request the next page of results.

pub fn max_results(&self) -> Option<i32>

The maximum number of results to return in a single call. To retrieve the remaining results, make another request with the returned NextToken value. This value can be between 5 and 1000. If this parameter is not specified, then all results are returned.

Trait Implementations

impl Clone for DescribeSecurityGroupsInput

fn clone(&self) -> DescribeSecurityGroupsInput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for DescribeSecurityGroupsInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq<DescribeSecurityGroupsInput> for DescribeSecurityGroupsInput

fn eq(&self, other: &DescribeSecurityGroupsInput) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for DescribeSecurityGroupsInput