Struct aws_sdk_ec2::client::fluent_builders::RegisterImage

pub struct RegisterImage { /* private fields */ }

Fluent builder constructing a request to RegisterImage.

Registers an AMI. When you're creating an AMI, this is the final step you must complete before you can launch an instance from the AMI. For more information about creating AMIs, see Creating your own AMIs in the Amazon Elastic Compute Cloud User Guide.

For Amazon EBS-backed instances, CreateImage creates and registers the AMI in a single request, so you don't have to register the AMI yourself. We recommend that you always use CreateImage unless you have a specific reason to use RegisterImage.

If needed, you can deregister an AMI at any time. Any modifications you make to an AMI backed by an instance store volume invalidates its registration. If you make changes to an image, deregister the previous image and register the new image.

Register a snapshot of a root device volume

You can use RegisterImage to create an Amazon EBS-backed Linux AMI from a snapshot of a root device volume. You specify the snapshot using a block device mapping. You can't set the encryption state of the volume using the block device mapping. If the snapshot is encrypted, or encryption by default is enabled, the root volume of an instance launched from the AMI is encrypted.

For more information, see Create a Linux AMI from a snapshot and Use encryption with Amazon EBS-backed AMIs in the Amazon Elastic Compute Cloud User Guide.

Amazon Web Services Marketplace product codes

If any snapshots have Amazon Web Services Marketplace product codes, they are copied to the new AMI.

Windows and some Linux distributions, such as Red Hat Enterprise Linux (RHEL) and SUSE Linux Enterprise Server (SLES), use the Amazon EC2 billing product code associated with an AMI to verify the subscription status for package updates. To create a new AMI for operating systems that require a billing product code, instead of registering the AMI, do the following to preserve the billing product code association:

1. Launch an instance from an existing AMI with that billing product code.

2. Customize the instance.

3. Create an AMI from the instance using CreateImage.

If you purchase a Reserved Instance to apply to an On-Demand Instance that was launched from an AMI with a billing product code, make sure that the Reserved Instance has the matching billing product code. If you purchase a Reserved Instance without the matching billing product code, the Reserved Instance will not be applied to the On-Demand Instance. For information about how to obtain the platform details and billing information of an AMI, see Understanding AMI billing in the Amazon Elastic Compute Cloud User Guide.

Implementations

impl RegisterImage

pub async fn send(
    self
) -> Result<RegisterImageOutput, SdkError<RegisterImageError>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn image_location(self, input: impl Into<String>) -> Self

The full path to your AMI manifest in Amazon S3 storage. The specified bucket must have the aws-exec-read canned access control list (ACL) to ensure that it can be accessed by Amazon EC2. For more information, see Canned ACLs in the Amazon S3 Service Developer Guide.

pub fn set_image_location(self, input: Option<String>) -> Self

The full path to your AMI manifest in Amazon S3 storage. The specified bucket must have the aws-exec-read canned access control list (ACL) to ensure that it can be accessed by Amazon EC2. For more information, see Canned ACLs in the Amazon S3 Service Developer Guide.

pub fn architecture(self, input: ArchitectureValues) -> Self

The architecture of the AMI.

Default: For Amazon EBS-backed AMIs, i386. For instance store-backed AMIs, the architecture specified in the manifest file.

pub fn set_architecture(self, input: Option<ArchitectureValues>) -> Self

The architecture of the AMI.

Default: For Amazon EBS-backed AMIs, i386. For instance store-backed AMIs, the architecture specified in the manifest file.

pub fn block_device_mappings(self, input: BlockDeviceMapping) -> Self

Appends an item to BlockDeviceMappings.

To override the contents of this collection use set_block_device_mappings.

The block device mapping entries.

If you specify an Amazon EBS volume using the ID of an Amazon EBS snapshot, you can't specify the encryption state of the volume.

If you create an AMI on an Outpost, then all backing snapshots must be on the same Outpost or in the Region of that Outpost. AMIs on an Outpost that include local snapshots can be used to launch instances on the same Outpost only. For more information, Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide.

pub fn set_block_device_mappings(
    self,
    input: Option<Vec<BlockDeviceMapping>>
) -> Self

The block device mapping entries.

If you specify an Amazon EBS volume using the ID of an Amazon EBS snapshot, you can't specify the encryption state of the volume.

If you create an AMI on an Outpost, then all backing snapshots must be on the same Outpost or in the Region of that Outpost. AMIs on an Outpost that include local snapshots can be used to launch instances on the same Outpost only. For more information, Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide.

pub fn description(self, input: impl Into<String>) -> Self

A description for your AMI.

pub fn set_description(self, input: Option<String>) -> Self

A description for your AMI.

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn ena_support(self, input: bool) -> Self

Set to true to enable enhanced networking with ENA for the AMI and any instances that you launch from the AMI.

This option is supported only for HVM AMIs. Specifying this option with a PV AMI can make instances launched from the AMI unreachable.

pub fn set_ena_support(self, input: Option<bool>) -> Self

Set to true to enable enhanced networking with ENA for the AMI and any instances that you launch from the AMI.

This option is supported only for HVM AMIs. Specifying this option with a PV AMI can make instances launched from the AMI unreachable.

pub fn kernel_id(self, input: impl Into<String>) -> Self

The ID of the kernel.

pub fn set_kernel_id(self, input: Option<String>) -> Self

The ID of the kernel.

pub fn name(self, input: impl Into<String>) -> Self

A name for your AMI.

Constraints: 3-128 alphanumeric characters, parentheses (()), square brackets ([]), spaces ( ), periods (.), slashes (/), dashes (-), single quotes ('), at-signs (@), or underscores(_)

pub fn set_name(self, input: Option<String>) -> Self

A name for your AMI.

Constraints: 3-128 alphanumeric characters, parentheses (()), square brackets ([]), spaces ( ), periods (.), slashes (/), dashes (-), single quotes ('), at-signs (@), or underscores(_)

pub fn billing_products(self, input: impl Into<String>) -> Self

Appends an item to BillingProducts.

To override the contents of this collection use set_billing_products.

The billing product codes. Your account must be authorized to specify billing product codes. Otherwise, you can use the Amazon Web Services Marketplace to bill for the use of an AMI.

pub fn set_billing_products(self, input: Option<Vec<String>>) -> Self

The billing product codes. Your account must be authorized to specify billing product codes. Otherwise, you can use the Amazon Web Services Marketplace to bill for the use of an AMI.

pub fn ramdisk_id(self, input: impl Into<String>) -> Self

The ID of the RAM disk.

pub fn set_ramdisk_id(self, input: Option<String>) -> Self

The ID of the RAM disk.

pub fn root_device_name(self, input: impl Into<String>) -> Self

The device name of the root device volume (for example, /dev/sda1).

pub fn set_root_device_name(self, input: Option<String>) -> Self

The device name of the root device volume (for example, /dev/sda1).

pub fn sriov_net_support(self, input: impl Into<String>) -> Self

Set to simple to enable enhanced networking with the Intel 82599 Virtual Function interface for the AMI and any instances that you launch from the AMI.

There is no way to disable sriovNetSupport at this time.

This option is supported only for HVM AMIs. Specifying this option with a PV AMI can make instances launched from the AMI unreachable.

pub fn set_sriov_net_support(self, input: Option<String>) -> Self

Set to simple to enable enhanced networking with the Intel 82599 Virtual Function interface for the AMI and any instances that you launch from the AMI.

There is no way to disable sriovNetSupport at this time.

This option is supported only for HVM AMIs. Specifying this option with a PV AMI can make instances launched from the AMI unreachable.

pub fn virtualization_type(self, input: impl Into<String>) -> Self

The type of virtualization (hvm | paravirtual).

Default: paravirtual

pub fn set_virtualization_type(self, input: Option<String>) -> Self

The type of virtualization (hvm | paravirtual).

Default: paravirtual

pub fn boot_mode(self, input: BootModeValues) -> Self

The boot mode of the AMI. For more information, see Boot modes in the Amazon Elastic Compute Cloud User Guide.

pub fn set_boot_mode(self, input: Option<BootModeValues>) -> Self

The boot mode of the AMI. For more information, see Boot modes in the Amazon Elastic Compute Cloud User Guide.

pub fn tpm_support(self, input: TpmSupportValues) -> Self

Set to v2.0 to enable Trusted Platform Module (TPM) support. For more information, see NitroTPM in the Amazon Elastic Compute Cloud User Guide.

pub fn set_tpm_support(self, input: Option<TpmSupportValues>) -> Self

Set to v2.0 to enable Trusted Platform Module (TPM) support. For more information, see NitroTPM in the Amazon Elastic Compute Cloud User Guide.

pub fn uefi_data(self, input: impl Into<String>) -> Self

Base64 representation of the non-volatile UEFI variable store. To retrieve the UEFI data, use the GetInstanceUefiData command. You can inspect and modify the UEFI data by using the python-uefivars tool on GitHub. For more information, see UEFI Secure Boot in the Amazon Elastic Compute Cloud User Guide.

pub fn set_uefi_data(self, input: Option<String>) -> Self

Base64 representation of the non-volatile UEFI variable store. To retrieve the UEFI data, use the GetInstanceUefiData command. You can inspect and modify the UEFI data by using the python-uefivars tool on GitHub. For more information, see UEFI Secure Boot in the Amazon Elastic Compute Cloud User Guide.

Trait Implementations

impl Clone for RegisterImage

fn clone(&self) -> RegisterImage

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for RegisterImage

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.