Struct aws_sdk_ec2::input::create_network_interface_input::Builder

pub struct Builder { /* private fields */ }

A builder for CreateNetworkInterfaceInput.

Implementations

impl Builder

pub fn description(self, input: impl Into<String>) -> Self

A description for the network interface.

pub fn set_description(self, input: Option<String>) -> Self

A description for the network interface.

pub fn dry_run(self, input: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn groups(self, input: impl Into<String>) -> Self

Appends an item to groups.

To override the contents of this collection use set_groups.

The IDs of one or more security groups.

pub fn set_groups(self, input: Option<Vec<String>>) -> Self

The IDs of one or more security groups.

pub fn ipv6_address_count(self, input: i32) -> Self

The number of IPv6 addresses to assign to a network interface. Amazon EC2 automatically selects the IPv6 addresses from the subnet range. You can't use this option if specifying specific IPv6 addresses. If your subnet has the AssignIpv6AddressOnCreation attribute set to true, you can specify 0 to override this setting.

pub fn set_ipv6_address_count(self, input: Option<i32>) -> Self

The number of IPv6 addresses to assign to a network interface. Amazon EC2 automatically selects the IPv6 addresses from the subnet range. You can't use this option if specifying specific IPv6 addresses. If your subnet has the AssignIpv6AddressOnCreation attribute set to true, you can specify 0 to override this setting.

pub fn ipv6_addresses(self, input: InstanceIpv6Address) -> Self

Appends an item to ipv6_addresses.

To override the contents of this collection use set_ipv6_addresses.

One or more specific IPv6 addresses from the IPv6 CIDR block range of your subnet. You can't use this option if you're specifying a number of IPv6 addresses.

pub fn set_ipv6_addresses(self, input: Option<Vec<InstanceIpv6Address>>) -> Self

One or more specific IPv6 addresses from the IPv6 CIDR block range of your subnet. You can't use this option if you're specifying a number of IPv6 addresses.

pub fn private_ip_address(self, input: impl Into<String>) -> Self

The primary private IPv4 address of the network interface. If you don't specify an IPv4 address, Amazon EC2 selects one for you from the subnet's IPv4 CIDR range. If you specify an IP address, you cannot indicate any IP addresses specified in privateIpAddresses as primary (only one IP address can be designated as primary).

pub fn set_private_ip_address(self, input: Option<String>) -> Self

The primary private IPv4 address of the network interface. If you don't specify an IPv4 address, Amazon EC2 selects one for you from the subnet's IPv4 CIDR range. If you specify an IP address, you cannot indicate any IP addresses specified in privateIpAddresses as primary (only one IP address can be designated as primary).

pub fn private_ip_addresses(self, input: PrivateIpAddressSpecification) -> Self

Appends an item to private_ip_addresses.

To override the contents of this collection use set_private_ip_addresses.

One or more private IPv4 addresses.

pub fn set_private_ip_addresses(
    self,
    input: Option<Vec<PrivateIpAddressSpecification>>
) -> Self

One or more private IPv4 addresses.

pub fn secondary_private_ip_address_count(self, input: i32) -> Self

The number of secondary private IPv4 addresses to assign to a network interface. When you specify a number of secondary IPv4 addresses, Amazon EC2 selects these IP addresses within the subnet's IPv4 CIDR range. You can't specify this option and specify more than one private IP address using privateIpAddresses.

The number of IP addresses you can assign to a network interface varies by instance type. For more information, see IP Addresses Per ENI Per Instance Type in the Amazon Virtual Private Cloud User Guide.

pub fn set_secondary_private_ip_address_count(self, input: Option<i32>) -> Self

The number of secondary private IPv4 addresses to assign to a network interface. When you specify a number of secondary IPv4 addresses, Amazon EC2 selects these IP addresses within the subnet's IPv4 CIDR range. You can't specify this option and specify more than one private IP address using privateIpAddresses.

The number of IP addresses you can assign to a network interface varies by instance type. For more information, see IP Addresses Per ENI Per Instance Type in the Amazon Virtual Private Cloud User Guide.

pub fn ipv4_prefixes(self, input: Ipv4PrefixSpecificationRequest) -> Self

Appends an item to ipv4_prefixes.

To override the contents of this collection use set_ipv4_prefixes.

One or more IPv4 prefixes assigned to the network interface. You cannot use this option if you use the Ipv4PrefixCount option.

pub fn set_ipv4_prefixes(
    self,
    input: Option<Vec<Ipv4PrefixSpecificationRequest>>
) -> Self

One or more IPv4 prefixes assigned to the network interface. You cannot use this option if you use the Ipv4PrefixCount option.

pub fn ipv4_prefix_count(self, input: i32) -> Self

The number of IPv4 prefixes that Amazon Web Services automatically assigns to the network interface. You cannot use this option if you use the Ipv4 Prefixes option.

pub fn set_ipv4_prefix_count(self, input: Option<i32>) -> Self

The number of IPv4 prefixes that Amazon Web Services automatically assigns to the network interface. You cannot use this option if you use the Ipv4 Prefixes option.

pub fn ipv6_prefixes(self, input: Ipv6PrefixSpecificationRequest) -> Self

Appends an item to ipv6_prefixes.

To override the contents of this collection use set_ipv6_prefixes.

One or more IPv6 prefixes assigned to the network interface. You cannot use this option if you use the Ipv6PrefixCount option.

pub fn set_ipv6_prefixes(
    self,
    input: Option<Vec<Ipv6PrefixSpecificationRequest>>
) -> Self

One or more IPv6 prefixes assigned to the network interface. You cannot use this option if you use the Ipv6PrefixCount option.

pub fn ipv6_prefix_count(self, input: i32) -> Self

The number of IPv6 prefixes that Amazon Web Services automatically assigns to the network interface. You cannot use this option if you use the Ipv6Prefixes option.

pub fn set_ipv6_prefix_count(self, input: Option<i32>) -> Self

The number of IPv6 prefixes that Amazon Web Services automatically assigns to the network interface. You cannot use this option if you use the Ipv6Prefixes option.

pub fn interface_type(self, input: NetworkInterfaceCreationType) -> Self

The type of network interface. The default is interface.

The only supported values are efa and trunk.

pub fn set_interface_type(
    self,
    input: Option<NetworkInterfaceCreationType>
) -> Self

The type of network interface. The default is interface.

The only supported values are efa and trunk.

pub fn subnet_id(self, input: impl Into<String>) -> Self

The ID of the subnet to associate with the network interface.

pub fn set_subnet_id(self, input: Option<String>) -> Self

The ID of the subnet to associate with the network interface.

pub fn tag_specifications(self, input: TagSpecification) -> Self

Appends an item to tag_specifications.

To override the contents of this collection use set_tag_specifications.

The tags to apply to the new network interface.

pub fn set_tag_specifications(self, input: Option<Vec<TagSpecification>>) -> Self

The tags to apply to the new network interface.

pub fn client_token(self, input: impl Into<String>) -> Self

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensuring Idempotency.

pub fn set_client_token(self, input: Option<String>) -> Self

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensuring Idempotency.

pub fn build(self) -> Result<CreateNetworkInterfaceInput, BuildError>

Consumes the builder and constructs a CreateNetworkInterfaceInput.

Trait Implementations

impl Clone for Builder

fn clone(&self) -> Builder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Builder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Builder

fn default() -> Builder

Returns the “default value” for a type.

impl PartialEq<Builder> for Builder

fn eq(&self, other: &Builder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Builder) -> bool

This method tests for !=.

impl StructuralPartialEq for Builder