Struct aws_sdk_ec2::input::AuthorizeSecurityGroupIngressInput

#[non_exhaustive]
pub struct AuthorizeSecurityGroupIngressInput {
    pub cidr_ip: Option<String>,
    pub from_port: Option<i32>,
    pub group_id: Option<String>,
    pub group_name: Option<String>,
    pub ip_permissions: Option<Vec<IpPermission>>,
    pub ip_protocol: Option<String>,
    pub source_security_group_name: Option<String>,
    pub source_security_group_owner_id: Option<String>,
    pub to_port: Option<i32>,
    pub dry_run: Option<bool>,
    pub tag_specifications: Option<Vec<TagSpecification>>,
}

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

cidr_ip: Option<String>

The IPv4 address range, in CIDR format. You can't specify this parameter when specifying a source security group. To specify an IPv6 address range, use a set of IP permissions.

Alternatively, use a set of IP permissions to specify multiple rules and a description for the rule.

from_port: Option<i32>

The start of port range for the TCP and UDP protocols, or an ICMP type number. For the ICMP type number, use -1 to specify all types. If you specify all ICMP types, you must specify all codes.

Alternatively, use a set of IP permissions to specify multiple rules and a description for the rule.

group_id: Option<String>

The ID of the security group. You must specify either the security group ID or the security group name in the request. For security groups in a nondefault VPC, you must specify the security group ID.

group_name: Option<String>

[EC2-Classic, default VPC] The name of the security group. You must specify either the security group ID or the security group name in the request.

ip_permissions: Option<Vec<IpPermission>>

The sets of IP permissions.

ip_protocol: Option<String>

The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers). To specify icmpv6, use a set of IP permissions.

[VPC only] Use -1 to specify all protocols. If you specify -1 or a protocol other than tcp, udp, or icmp, traffic on all ports is allowed, regardless of any ports you specify.

Alternatively, use a set of IP permissions to specify multiple rules and a description for the rule.

source_security_group_name: Option<String>

[EC2-Classic, default VPC] The name of the source security group. You can't specify this parameter in combination with the following parameters: the CIDR IP address range, the start of the port range, the IP protocol, and the end of the port range. Creates rules that grant full ICMP, UDP, and TCP access. To create a rule with a specific IP protocol and port range, use a set of IP permissions instead. For EC2-VPC, the source security group must be in the same VPC.

source_security_group_owner_id: Option<String>

[nondefault VPC] The Amazon Web Services account ID for the source security group, if the source security group is in a different account. You can't specify this parameter in combination with the following parameters: the CIDR IP address range, the IP protocol, the start of the port range, and the end of the port range. Creates rules that grant full ICMP, UDP, and TCP access. To create a rule with a specific IP protocol and port range, use a set of IP permissions instead.

to_port: Option<i32>

The end of port range for the TCP and UDP protocols, or an ICMP code number. For the ICMP code number, use -1 to specify all codes. If you specify all ICMP types, you must specify all codes.

Alternatively, use a set of IP permissions to specify multiple rules and a description for the rule.

dry_run: Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

tag_specifications: Option<Vec<TagSpecification>>

[VPC Only] The tags applied to the security group rule.

Implementations

impl AuthorizeSecurityGroupIngressInput

pub async fn make_operation(
    &self,
    _config: &Config
) -> Result<Operation<AuthorizeSecurityGroupIngress, AwsErrorRetryPolicy>, BuildError>

Consumes the builder and constructs an Operation<AuthorizeSecurityGroupIngress>

pub fn builder() -> Builder

Creates a new builder-style object to manufacture AuthorizeSecurityGroupIngressInput

impl AuthorizeSecurityGroupIngressInput

pub fn cidr_ip(&self) -> Option<&str>

The IPv4 address range, in CIDR format. You can't specify this parameter when specifying a source security group. To specify an IPv6 address range, use a set of IP permissions.

Alternatively, use a set of IP permissions to specify multiple rules and a description for the rule.

pub fn from_port(&self) -> Option<i32>

The start of port range for the TCP and UDP protocols, or an ICMP type number. For the ICMP type number, use -1 to specify all types. If you specify all ICMP types, you must specify all codes.

Alternatively, use a set of IP permissions to specify multiple rules and a description for the rule.

pub fn group_id(&self) -> Option<&str>

The ID of the security group. You must specify either the security group ID or the security group name in the request. For security groups in a nondefault VPC, you must specify the security group ID.

pub fn group_name(&self) -> Option<&str>

[EC2-Classic, default VPC] The name of the security group. You must specify either the security group ID or the security group name in the request.

pub fn ip_permissions(&self) -> Option<&[IpPermission]>

The sets of IP permissions.

pub fn ip_protocol(&self) -> Option<&str>

The IP protocol name (tcp, udp, icmp) or number (see Protocol Numbers). To specify icmpv6, use a set of IP permissions.

[VPC only] Use -1 to specify all protocols. If you specify -1 or a protocol other than tcp, udp, or icmp, traffic on all ports is allowed, regardless of any ports you specify.

Alternatively, use a set of IP permissions to specify multiple rules and a description for the rule.

pub fn source_security_group_name(&self) -> Option<&str>

[EC2-Classic, default VPC] The name of the source security group. You can't specify this parameter in combination with the following parameters: the CIDR IP address range, the start of the port range, the IP protocol, and the end of the port range. Creates rules that grant full ICMP, UDP, and TCP access. To create a rule with a specific IP protocol and port range, use a set of IP permissions instead. For EC2-VPC, the source security group must be in the same VPC.

pub fn source_security_group_owner_id(&self) -> Option<&str>

[nondefault VPC] The Amazon Web Services account ID for the source security group, if the source security group is in a different account. You can't specify this parameter in combination with the following parameters: the CIDR IP address range, the IP protocol, the start of the port range, and the end of the port range. Creates rules that grant full ICMP, UDP, and TCP access. To create a rule with a specific IP protocol and port range, use a set of IP permissions instead.

pub fn to_port(&self) -> Option<i32>

The end of port range for the TCP and UDP protocols, or an ICMP code number. For the ICMP code number, use -1 to specify all codes. If you specify all ICMP types, you must specify all codes.

Alternatively, use a set of IP permissions to specify multiple rules and a description for the rule.

pub fn dry_run(&self) -> Option<bool>

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn tag_specifications(&self) -> Option<&[TagSpecification]>

[VPC Only] The tags applied to the security group rule.

Trait Implementations

impl Clone for AuthorizeSecurityGroupIngressInput

fn clone(&self) -> AuthorizeSecurityGroupIngressInput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for AuthorizeSecurityGroupIngressInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq<AuthorizeSecurityGroupIngressInput> for AuthorizeSecurityGroupIngressInput

fn eq(&self, other: &AuthorizeSecurityGroupIngressInput) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &AuthorizeSecurityGroupIngressInput) -> bool

This method tests for !=.

impl StructuralPartialEq for AuthorizeSecurityGroupIngressInput