Struct aws_sdk_ec2::client::fluent_builders::CreateCustomerGateway

pub struct CreateCustomerGateway<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }

Fluent builder constructing a request to CreateCustomerGateway.

Provides information to Amazon Web Services about your VPN customer gateway device. The customer gateway is the appliance at your end of the VPN connection. (The device on the Amazon Web Services side of the VPN connection is the virtual private gateway.) You must provide the internet-routable IP address of the customer gateway's external interface. The IP address must be static and can be behind a device performing network address translation (NAT).

For devices that use Border Gateway Protocol (BGP), you can also provide the device's BGP Autonomous System Number (ASN). You can use an existing ASN assigned to your network. If you don't have an ASN already, you can use a private ASN (in the 64512 - 65534 range).

Amazon EC2 supports all 4-byte ASN numbers in the range of 1 - 2147483647, with the exception of the following:

• 7224 - reserved in the us-east-1 Region

• 9059 - reserved in the eu-west-1 Region

• 17943 - reserved in the ap-southeast-1 Region

• 10124 - reserved in the ap-northeast-1 Region

For more information, see Amazon Web Services Site-to-Site VPN in the Amazon Web Services Site-to-Site VPN User Guide.

To create more than one customer gateway with the same VPN type, IP address, and BGP ASN, specify a unique device name for each customer gateway. Identical requests return information about the existing customer gateway and do not create new customer gateways.

Implementations

impl<C, M, R> CreateCustomerGateway<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub async fn send(
    self
) -> Result<CreateCustomerGatewayOutput, SdkError<CreateCustomerGatewayError>> where
    R::Policy: SmithyRetryPolicy<CreateCustomerGatewayInputOperationOutputAlias, CreateCustomerGatewayOutput, CreateCustomerGatewayError, CreateCustomerGatewayInputOperationRetryAlias>, 

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn bgp_asn(self, inp: i32) -> Self

For devices that support BGP, the customer gateway's BGP ASN.

Default: 65000

pub fn set_bgp_asn(self, input: Option<i32>) -> Self

For devices that support BGP, the customer gateway's BGP ASN.

Default: 65000

pub fn public_ip(self, inp: impl Into<String>) -> Self

The Internet-routable IP address for the customer gateway's outside interface. The address must be static.

pub fn set_public_ip(self, input: Option<String>) -> Self

The Internet-routable IP address for the customer gateway's outside interface. The address must be static.

pub fn certificate_arn(self, inp: impl Into<String>) -> Self

The Amazon Resource Name (ARN) for the customer gateway certificate.

pub fn set_certificate_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) for the customer gateway certificate.

pub fn type(self, inp: GatewayType) -> Self

The type of VPN connection that this customer gateway supports (ipsec.1).

pub fn set_type(self, input: Option<GatewayType>) -> Self

The type of VPN connection that this customer gateway supports (ipsec.1).

pub fn tag_specifications(self, inp: impl Into<TagSpecification>) -> Self

Appends an item to TagSpecifications.

To override the contents of this collection use set_tag_specifications.

The tags to apply to the customer gateway.

pub fn set_tag_specifications(
    self,
    input: Option<Vec<TagSpecification>>
) -> Self

The tags to apply to the customer gateway.

pub fn device_name(self, inp: impl Into<String>) -> Self

A name for the customer gateway device.

Length Constraints: Up to 255 characters.

pub fn set_device_name(self, input: Option<String>) -> Self

A name for the customer gateway device.

Length Constraints: Up to 255 characters.

pub fn dry_run(self, inp: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

Trait Implementations

impl<C: Debug, M: Debug, R: Debug> Debug for CreateCustomerGateway<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.