Struct aws_sdk_ec2::client::fluent_builders::CreateNetworkAclEntry

pub struct CreateNetworkAclEntry<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }

Fluent builder constructing a request to CreateNetworkAclEntry.

Creates an entry (a rule) in a network ACL with the specified rule number. Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the ACL, we process the entries in the ACL according to the rule numbers, in ascending order. Each network ACL has a set of ingress rules and a separate set of egress rules.

We recommend that you leave room between the rule numbers (for example, 100, 110, 120, ...), and not number them one right after the other (for example, 101, 102, 103, ...). This makes it easier to add a rule between existing ones without having to renumber the rules.

After you add an entry, you can't modify it; you must either replace it, or create an entry and delete the old one.

For more information about network ACLs, see Network ACLs in the Amazon Virtual Private Cloud User Guide.

Implementations

impl<C, M, R> CreateNetworkAclEntry<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub async fn send(
    self
) -> Result<CreateNetworkAclEntryOutput, SdkError<CreateNetworkAclEntryError>> where
    R::Policy: SmithyRetryPolicy<CreateNetworkAclEntryInputOperationOutputAlias, CreateNetworkAclEntryOutput, CreateNetworkAclEntryError, CreateNetworkAclEntryInputOperationRetryAlias>, 

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn cidr_block(self, inp: impl Into<String>) -> Self

The IPv4 network range to allow or deny, in CIDR notation (for example 172.16.0.0/24). We modify the specified CIDR block to its canonical form; for example, if you specify 100.68.0.18/18, we modify it to 100.68.0.0/18.

pub fn set_cidr_block(self, input: Option<String>) -> Self

The IPv4 network range to allow or deny, in CIDR notation (for example 172.16.0.0/24). We modify the specified CIDR block to its canonical form; for example, if you specify 100.68.0.18/18, we modify it to 100.68.0.0/18.

pub fn dry_run(self, inp: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn egress(self, inp: bool) -> Self

Indicates whether this is an egress rule (rule is applied to traffic leaving the subnet).

pub fn set_egress(self, input: Option<bool>) -> Self

Indicates whether this is an egress rule (rule is applied to traffic leaving the subnet).

pub fn icmp_type_code(self, inp: IcmpTypeCode) -> Self

ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying protocol 1 (ICMP) or protocol 58 (ICMPv6) with an IPv6 CIDR block.

pub fn set_icmp_type_code(self, input: Option<IcmpTypeCode>) -> Self

ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying protocol 1 (ICMP) or protocol 58 (ICMPv6) with an IPv6 CIDR block.

pub fn ipv6_cidr_block(self, inp: impl Into<String>) -> Self

The IPv6 network range to allow or deny, in CIDR notation (for example 2001:db8:1234:1a00::/64).

pub fn set_ipv6_cidr_block(self, input: Option<String>) -> Self

The IPv6 network range to allow or deny, in CIDR notation (for example 2001:db8:1234:1a00::/64).

pub fn network_acl_id(self, inp: impl Into<String>) -> Self

The ID of the network ACL.

pub fn set_network_acl_id(self, input: Option<String>) -> Self

The ID of the network ACL.

pub fn port_range(self, inp: PortRange) -> Self

TCP or UDP protocols: The range of ports the rule applies to. Required if specifying protocol 6 (TCP) or 17 (UDP).

pub fn set_port_range(self, input: Option<PortRange>) -> Self

TCP or UDP protocols: The range of ports the rule applies to. Required if specifying protocol 6 (TCP) or 17 (UDP).

pub fn protocol(self, inp: impl Into<String>) -> Self

The protocol number. A value of "-1" means all protocols. If you specify "-1" or a protocol number other than "6" (TCP), "17" (UDP), or "1" (ICMP), traffic on all ports is allowed, regardless of any ports or ICMP types or codes that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv4 CIDR block, traffic for all ICMP types and codes allowed, regardless of any that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv6 CIDR block, you must specify an ICMP type and code.

pub fn set_protocol(self, input: Option<String>) -> Self

The protocol number. A value of "-1" means all protocols. If you specify "-1" or a protocol number other than "6" (TCP), "17" (UDP), or "1" (ICMP), traffic on all ports is allowed, regardless of any ports or ICMP types or codes that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv4 CIDR block, traffic for all ICMP types and codes allowed, regardless of any that you specify. If you specify protocol "58" (ICMPv6) and specify an IPv6 CIDR block, you must specify an ICMP type and code.

pub fn rule_action(self, inp: RuleAction) -> Self

Indicates whether to allow or deny the traffic that matches the rule.

pub fn set_rule_action(self, input: Option<RuleAction>) -> Self

Indicates whether to allow or deny the traffic that matches the rule.

pub fn rule_number(self, inp: i32) -> Self

The rule number for the entry (for example, 100). ACL entries are processed in ascending order by rule number.

Constraints: Positive integer from 1 to 32766. The range 32767 to 65535 is reserved for internal use.

pub fn set_rule_number(self, input: Option<i32>) -> Self

The rule number for the entry (for example, 100). ACL entries are processed in ascending order by rule number.

Constraints: Positive integer from 1 to 32766. The range 32767 to 65535 is reserved for internal use.

Trait Implementations

impl<C: Debug, M: Debug, R: Debug> Debug for CreateNetworkAclEntry<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.