Struct aws_sdk_ec2::client::fluent_builders::DescribeRouteTables

pub struct DescribeRouteTables<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }

Fluent builder constructing a request to DescribeRouteTables.

Describes one or more of your route tables.

Each subnet in your VPC must be associated with a route table. If a subnet is not explicitly associated with any route table, it is implicitly associated with the main route table. This command does not return the subnet ID for implicit associations.

For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.

Implementations

impl<C, M, R> DescribeRouteTables<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub async fn send(
    self
) -> Result<DescribeRouteTablesOutput, SdkError<DescribeRouteTablesError>> where
    R::Policy: SmithyRetryPolicy<DescribeRouteTablesInputOperationOutputAlias, DescribeRouteTablesOutput, DescribeRouteTablesError, DescribeRouteTablesInputOperationRetryAlias>, 

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn filters(self, inp: impl Into<Filter>) -> Self

Appends an item to Filters.

To override the contents of this collection use set_filters.

One or more filters.

• association.route-table-association-id - The ID of an association ID for the route table.

• association.route-table-id - The ID of the route table involved in the association.

• association.subnet-id - The ID of the subnet involved in the association.

• association.main - Indicates whether the route table is the main route table for the VPC (true | false). Route tables that do not have an association ID are not returned in the response.

• owner-id - The ID of the Amazon Web Services account that owns the route table.

• route-table-id - The ID of the route table.

• route.destination-cidr-block - The IPv4 CIDR range specified in a route in the table.

• route.destination-ipv6-cidr-block - The IPv6 CIDR range specified in a route in the route table.

• route.destination-prefix-list-id - The ID (prefix) of the Amazon Web Service specified in a route in the table.

• route.egress-only-internet-gateway-id - The ID of an egress-only Internet gateway specified in a route in the route table.

• route.gateway-id - The ID of a gateway specified in a route in the table.

• route.instance-id - The ID of an instance specified in a route in the table.

• route.nat-gateway-id - The ID of a NAT gateway.

• route.transit-gateway-id - The ID of a transit gateway.

• route.origin - Describes how the route was created. CreateRouteTable indicates that the route was automatically created when the route table was created; CreateRoute indicates that the route was manually added to the route table; EnableVgwRoutePropagation indicates that the route was propagated by route propagation.

• route.state - The state of a route in the route table (active | blackhole). The blackhole state indicates that the route's target isn't available (for example, the specified gateway isn't attached to the VPC, the specified NAT instance has been terminated, and so on).

• route.vpc-peering-connection-id - The ID of a VPC peering connection specified in a route in the table.

• tag: - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.

• tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.

• vpc-id - The ID of the VPC for the route table.

pub fn set_filters(self, input: Option<Vec<Filter>>) -> Self

One or more filters.

• association.route-table-association-id - The ID of an association ID for the route table.

• association.route-table-id - The ID of the route table involved in the association.

• association.subnet-id - The ID of the subnet involved in the association.

• association.main - Indicates whether the route table is the main route table for the VPC (true | false). Route tables that do not have an association ID are not returned in the response.

• owner-id - The ID of the Amazon Web Services account that owns the route table.

• route-table-id - The ID of the route table.

• route.destination-cidr-block - The IPv4 CIDR range specified in a route in the table.

• route.destination-ipv6-cidr-block - The IPv6 CIDR range specified in a route in the route table.

• route.destination-prefix-list-id - The ID (prefix) of the Amazon Web Service specified in a route in the table.

• route.egress-only-internet-gateway-id - The ID of an egress-only Internet gateway specified in a route in the route table.

• route.gateway-id - The ID of a gateway specified in a route in the table.

• route.instance-id - The ID of an instance specified in a route in the table.

• route.nat-gateway-id - The ID of a NAT gateway.

• route.transit-gateway-id - The ID of a transit gateway.

• route.origin - Describes how the route was created. CreateRouteTable indicates that the route was automatically created when the route table was created; CreateRoute indicates that the route was manually added to the route table; EnableVgwRoutePropagation indicates that the route was propagated by route propagation.

• route.state - The state of a route in the route table (active | blackhole). The blackhole state indicates that the route's target isn't available (for example, the specified gateway isn't attached to the VPC, the specified NAT instance has been terminated, and so on).

• route.vpc-peering-connection-id - The ID of a VPC peering connection specified in a route in the table.

• tag: - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.

• tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.

• vpc-id - The ID of the VPC for the route table.

pub fn dry_run(self, inp: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn route_table_ids(self, inp: impl Into<String>) -> Self

Appends an item to RouteTableIds.

To override the contents of this collection use set_route_table_ids.

One or more route table IDs.

Default: Describes all your route tables.

pub fn set_route_table_ids(self, input: Option<Vec<String>>) -> Self

One or more route table IDs.

Default: Describes all your route tables.

pub fn next_token(self, inp: impl Into<String>) -> Self

The token for the next page of results.

pub fn set_next_token(self, input: Option<String>) -> Self

The token for the next page of results.

pub fn max_results(self, inp: i32) -> Self

The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.

pub fn set_max_results(self, input: Option<i32>) -> Self

The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.

Trait Implementations

impl<C: Debug, M: Debug, R: Debug> Debug for DescribeRouteTables<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.