Struct aws_sdk_ec2::client::fluent_builders::CreateFlowLogs

pub struct CreateFlowLogs<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }

Fluent builder constructing a request to CreateFlowLogs.

Creates one or more flow logs to capture information about IP traffic for a specific network interface, subnet, or VPC.

Flow log data for a monitored network interface is recorded as flow log records, which are log events consisting of fields that describe the traffic flow. For more information, see Flow log records in the Amazon Virtual Private Cloud User Guide.

When publishing to CloudWatch Logs, flow log records are published to a log group, and each network interface has a unique log stream in the log group. When publishing to Amazon S3, flow log records for all of the monitored network interfaces are published to a single log file object that is stored in the specified bucket.

For more information, see VPC Flow Logs in the Amazon Virtual Private Cloud User Guide.

Implementations

impl<C, M, R> CreateFlowLogs<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub async fn send(
    self
) -> Result<CreateFlowLogsOutput, SdkError<CreateFlowLogsError>> where
    R::Policy: SmithyRetryPolicy<CreateFlowLogsInputOperationOutputAlias, CreateFlowLogsOutput, CreateFlowLogsError, CreateFlowLogsInputOperationRetryAlias>, 

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn dry_run(self, inp: bool) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn set_dry_run(self, input: Option<bool>) -> Self

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.

pub fn client_token(self, inp: impl Into<String>) -> Self

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.

pub fn set_client_token(self, input: Option<String>) -> Self

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.

pub fn deliver_logs_permission_arn(self, inp: impl Into<String>) -> Self

The ARN for the IAM role that permits Amazon EC2 to publish flow logs to a CloudWatch Logs log group in your account.

If you specify LogDestinationType as s3, do not specify DeliverLogsPermissionArn or LogGroupName.

pub fn set_deliver_logs_permission_arn(self, input: Option<String>) -> Self

The ARN for the IAM role that permits Amazon EC2 to publish flow logs to a CloudWatch Logs log group in your account.

If you specify LogDestinationType as s3, do not specify DeliverLogsPermissionArn or LogGroupName.

pub fn log_group_name(self, inp: impl Into<String>) -> Self

The name of a new or existing CloudWatch Logs log group where Amazon EC2 publishes your flow logs.

If you specify LogDestinationType as s3, do not specify DeliverLogsPermissionArn or LogGroupName.

pub fn set_log_group_name(self, input: Option<String>) -> Self

The name of a new or existing CloudWatch Logs log group where Amazon EC2 publishes your flow logs.

If you specify LogDestinationType as s3, do not specify DeliverLogsPermissionArn or LogGroupName.

pub fn resource_ids(self, inp: impl Into<String>) -> Self

Appends an item to ResourceIds.

To override the contents of this collection use set_resource_ids.

The ID of the subnet, network interface, or VPC for which you want to create a flow log.

Constraints: Maximum of 1000 resources

pub fn set_resource_ids(self, input: Option<Vec<String>>) -> Self

The ID of the subnet, network interface, or VPC for which you want to create a flow log.

Constraints: Maximum of 1000 resources

pub fn resource_type(self, inp: FlowLogsResourceType) -> Self

The type of resource for which to create the flow log. For example, if you specified a VPC ID for the ResourceId property, specify VPC for this property.

pub fn set_resource_type(self, input: Option<FlowLogsResourceType>) -> Self

The type of resource for which to create the flow log. For example, if you specified a VPC ID for the ResourceId property, specify VPC for this property.

pub fn traffic_type(self, inp: TrafficType) -> Self

The type of traffic to log. You can log traffic that the resource accepts or rejects, or all traffic.

pub fn set_traffic_type(self, input: Option<TrafficType>) -> Self

The type of traffic to log. You can log traffic that the resource accepts or rejects, or all traffic.

pub fn log_destination_type(self, inp: LogDestinationType) -> Self

The type of destination to which the flow log data is to be published. Flow log data can be published to CloudWatch Logs or Amazon S3. To publish flow log data to CloudWatch Logs, specify cloud-watch-logs. To publish flow log data to Amazon S3, specify s3.

If you specify LogDestinationType as s3, do not specify DeliverLogsPermissionArn or LogGroupName.

Default: cloud-watch-logs

pub fn set_log_destination_type(self, input: Option<LogDestinationType>) -> Self

The type of destination to which the flow log data is to be published. Flow log data can be published to CloudWatch Logs or Amazon S3. To publish flow log data to CloudWatch Logs, specify cloud-watch-logs. To publish flow log data to Amazon S3, specify s3.

If you specify LogDestinationType as s3, do not specify DeliverLogsPermissionArn or LogGroupName.

Default: cloud-watch-logs

pub fn log_destination(self, inp: impl Into<String>) -> Self

The destination to which the flow log data is to be published. Flow log data can be published to a CloudWatch Logs log group or an Amazon S3 bucket. The value specified for this parameter depends on the value specified for LogDestinationType.

If LogDestinationType is not specified or cloud-watch-logs, specify the Amazon Resource Name (ARN) of the CloudWatch Logs log group. For example, to publish to a log group called my-logs, specify arn:aws:logs:us-east-1:123456789012:log-group:my-logs. Alternatively, use LogGroupName instead.

If LogDestinationType is s3, specify the ARN of the Amazon S3 bucket. You can also specify a subfolder in the bucket. To specify a subfolder in the bucket, use the following ARN format: bucket_ARN/subfolder_name/. For example, to specify a subfolder named my-logs in a bucket named my-bucket, use the following ARN: arn:aws:s3:::my-bucket/my-logs/. You cannot use AWSLogs as a subfolder name. This is a reserved term.

pub fn set_log_destination(self, input: Option<String>) -> Self

The destination to which the flow log data is to be published. Flow log data can be published to a CloudWatch Logs log group or an Amazon S3 bucket. The value specified for this parameter depends on the value specified for LogDestinationType.

If LogDestinationType is not specified or cloud-watch-logs, specify the Amazon Resource Name (ARN) of the CloudWatch Logs log group. For example, to publish to a log group called my-logs, specify arn:aws:logs:us-east-1:123456789012:log-group:my-logs. Alternatively, use LogGroupName instead.

If LogDestinationType is s3, specify the ARN of the Amazon S3 bucket. You can also specify a subfolder in the bucket. To specify a subfolder in the bucket, use the following ARN format: bucket_ARN/subfolder_name/. For example, to specify a subfolder named my-logs in a bucket named my-bucket, use the following ARN: arn:aws:s3:::my-bucket/my-logs/. You cannot use AWSLogs as a subfolder name. This is a reserved term.

pub fn log_format(self, inp: impl Into<String>) -> Self

The fields to include in the flow log record, in the order in which they should appear. For a list of available fields, see Flow log records. If you omit this parameter, the flow log is created using the default format. If you specify this parameter, you must specify at least one field.

Specify the fields using the ${field-id} format, separated by spaces. For the CLI, surround this parameter value with single quotes on Linux or double quotes on Windows.

pub fn set_log_format(self, input: Option<String>) -> Self

The fields to include in the flow log record, in the order in which they should appear. For a list of available fields, see Flow log records. If you omit this parameter, the flow log is created using the default format. If you specify this parameter, you must specify at least one field.

Specify the fields using the ${field-id} format, separated by spaces. For the CLI, surround this parameter value with single quotes on Linux or double quotes on Windows.

pub fn tag_specifications(self, inp: impl Into<TagSpecification>) -> Self

Appends an item to TagSpecifications.

To override the contents of this collection use set_tag_specifications.

The tags to apply to the flow logs.

pub fn set_tag_specifications(
    self,
    input: Option<Vec<TagSpecification>>
) -> Self

The tags to apply to the flow logs.

pub fn max_aggregation_interval(self, inp: i32) -> Self

The maximum interval of time during which a flow of packets is captured and aggregated into a flow log record. You can specify 60 seconds (1 minute) or 600 seconds (10 minutes).

When a network interface is attached to a Nitro-based instance, the aggregation interval is always 60 seconds or less, regardless of the value that you specify.

Default: 600

pub fn set_max_aggregation_interval(self, input: Option<i32>) -> Self

The maximum interval of time during which a flow of packets is captured and aggregated into a flow log record. You can specify 60 seconds (1 minute) or 600 seconds (10 minutes).

When a network interface is attached to a Nitro-based instance, the aggregation interval is always 60 seconds or less, regardless of the value that you specify.

Default: 600

pub fn destination_options(self, inp: DestinationOptionsRequest) -> Self

The destination options.

pub fn set_destination_options(
    self,
    input: Option<DestinationOptionsRequest>
) -> Self

The destination options.

Trait Implementations

impl<C: Debug, M: Debug, R: Debug> Debug for CreateFlowLogs<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.