Struct aws_sdk_dynamodb::input::update_item_input::Builder

pub struct Builder { /* private fields */ }

A builder for UpdateItemInput.

Implementations

impl Builder

pub fn table_name(self, input: impl Into<String>) -> Self

The name of the table containing the item to update.

Examples found in repository

src/client.rs (line 7712)

        pub fn table_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.table_name(input.into());
            self
        }

pub fn set_table_name(self, input: Option<String>) -> Self

The name of the table containing the item to update.

Examples found in repository

src/client.rs (line 7717)

        pub fn set_table_name(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_table_name(input);
            self
        }

pub fn key(self, k: impl Into<String>, v: AttributeValue) -> Self

Adds a key-value pair to key.

To override the contents of this collection use set_key.

The primary key of the item to be updated. Each element consists of an attribute name and a value for that attribute.

For the primary key, you must provide all of the attributes. For example, with a simple primary key, you only need to provide a value for the partition key. For a composite primary key, you must provide values for both the partition key and the sort key.

Examples found in repository

src/client.rs (line 7731)

        pub fn key(
            mut self,
            k: impl Into<std::string::String>,
            v: crate::model::AttributeValue,
        ) -> Self {
            self.inner = self.inner.key(k.into(), v);
            self
        }

pub fn set_key(self, input: Option<HashMap<String, AttributeValue>>) -> Self

The primary key of the item to be updated. Each element consists of an attribute name and a value for that attribute.

For the primary key, you must provide all of the attributes. For example, with a simple primary key, you only need to provide a value for the partition key. For a composite primary key, you must provide values for both the partition key and the sort key.

Examples found in repository

src/client.rs (line 7742)

        pub fn set_key(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, crate::model::AttributeValue>,
            >,
        ) -> Self {
            self.inner = self.inner.set_key(input);
            self
        }

pub fn attribute_updates(
    self,
    k: impl Into<String>,
    v: AttributeValueUpdate
) -> Self

Adds a key-value pair to attribute_updates.

To override the contents of this collection use set_attribute_updates.

This is a legacy parameter. Use UpdateExpression instead. For more information, see AttributeUpdates in the Amazon DynamoDB Developer Guide.

Examples found in repository

src/client.rs (line 7755)

        pub fn attribute_updates(
            mut self,
            k: impl Into<std::string::String>,
            v: crate::model::AttributeValueUpdate,
        ) -> Self {
            self.inner = self.inner.attribute_updates(k.into(), v);
            self
        }

pub fn set_attribute_updates(
    self,
    input: Option<HashMap<String, AttributeValueUpdate>>
) -> Self

This is a legacy parameter. Use UpdateExpression instead. For more information, see AttributeUpdates in the Amazon DynamoDB Developer Guide.

Examples found in repository

src/client.rs (line 7765)

        pub fn set_attribute_updates(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, crate::model::AttributeValueUpdate>,
            >,
        ) -> Self {
            self.inner = self.inner.set_attribute_updates(input);
            self
        }

pub fn expected(self, k: impl Into<String>, v: ExpectedAttributeValue) -> Self

Adds a key-value pair to expected.

To override the contents of this collection use set_expected.

This is a legacy parameter. Use ConditionExpression instead. For more information, see Expected in the Amazon DynamoDB Developer Guide.

Examples found in repository

src/client.rs (line 7778)

        pub fn expected(
            mut self,
            k: impl Into<std::string::String>,
            v: crate::model::ExpectedAttributeValue,
        ) -> Self {
            self.inner = self.inner.expected(k.into(), v);
            self
        }

pub fn set_expected(
    self,
    input: Option<HashMap<String, ExpectedAttributeValue>>
) -> Self

This is a legacy parameter. Use ConditionExpression instead. For more information, see Expected in the Amazon DynamoDB Developer Guide.

Examples found in repository

src/client.rs (line 7791)

        pub fn set_expected(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<
                    std::string::String,
                    crate::model::ExpectedAttributeValue,
                >,
            >,
        ) -> Self {
            self.inner = self.inner.set_expected(input);
            self
        }

pub fn conditional_operator(self, input: ConditionalOperator) -> Self

This is a legacy parameter. Use ConditionExpression instead. For more information, see ConditionalOperator in the Amazon DynamoDB Developer Guide.

Examples found in repository

src/client.rs (line 7796)

        pub fn conditional_operator(mut self, input: crate::model::ConditionalOperator) -> Self {
            self.inner = self.inner.conditional_operator(input);
            self
        }

pub fn set_conditional_operator(self, input: Option<ConditionalOperator>) -> Self

This is a legacy parameter. Use ConditionExpression instead. For more information, see ConditionalOperator in the Amazon DynamoDB Developer Guide.

Examples found in repository

src/client.rs (line 7804)

        pub fn set_conditional_operator(
            mut self,
            input: std::option::Option<crate::model::ConditionalOperator>,
        ) -> Self {
            self.inner = self.inner.set_conditional_operator(input);
            self
        }

pub fn return_values(self, input: ReturnValue) -> Self

Use ReturnValues if you want to get the item attributes as they appear before or after they are updated. For UpdateItem, the valid values are:

• NONE - If ReturnValues is not specified, or if its value is NONE, then nothing is returned. (This setting is the default for ReturnValues.)

• ALL_OLD - Returns all of the attributes of the item, as they appeared before the UpdateItem operation.

• UPDATED_OLD - Returns only the updated attributes, as they appeared before the UpdateItem operation.

• ALL_NEW - Returns all of the attributes of the item, as they appear after the UpdateItem operation.

• UPDATED_NEW - Returns only the updated attributes, as they appear after the UpdateItem operation.

There is no additional cost associated with requesting a return value aside from the small network and processing overhead of receiving a larger response. No read capacity units are consumed.

The values returned are strongly consistent.

Examples found in repository

src/client.rs (line 7818)

        pub fn return_values(mut self, input: crate::model::ReturnValue) -> Self {
            self.inner = self.inner.return_values(input);
            self
        }

pub fn set_return_values(self, input: Option<ReturnValue>) -> Self

Use ReturnValues if you want to get the item attributes as they appear before or after they are updated. For UpdateItem, the valid values are:

• NONE - If ReturnValues is not specified, or if its value is NONE, then nothing is returned. (This setting is the default for ReturnValues.)

• ALL_OLD - Returns all of the attributes of the item, as they appeared before the UpdateItem operation.

• UPDATED_OLD - Returns only the updated attributes, as they appeared before the UpdateItem operation.

• ALL_NEW - Returns all of the attributes of the item, as they appear after the UpdateItem operation.

• UPDATED_NEW - Returns only the updated attributes, as they appear after the UpdateItem operation.

There is no additional cost associated with requesting a return value aside from the small network and processing overhead of receiving a larger response. No read capacity units are consumed.

The values returned are strongly consistent.

Examples found in repository

src/client.rs (line 7835)

        pub fn set_return_values(
            mut self,
            input: std::option::Option<crate::model::ReturnValue>,
        ) -> Self {
            self.inner = self.inner.set_return_values(input);
            self
        }

pub fn return_consumed_capacity(self, input: ReturnConsumedCapacity) -> Self

Determines the level of detail about either provisioned or on-demand throughput consumption that is returned in the response:

• INDEXES - The response includes the aggregate ConsumedCapacity for the operation, together with ConsumedCapacity for each table and secondary index that was accessed.

  Note that some operations, such as GetItem and BatchGetItem, do not access any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity information for table(s).

• TOTAL - The response includes only the aggregate ConsumedCapacity for the operation.

• NONE - No ConsumedCapacity details are included in the response.

Examples found in repository

src/client.rs (line 7848)

        pub fn return_consumed_capacity(
            mut self,
            input: crate::model::ReturnConsumedCapacity,
        ) -> Self {
            self.inner = self.inner.return_consumed_capacity(input);
            self
        }

pub fn set_return_consumed_capacity(
    self,
    input: Option<ReturnConsumedCapacity>
) -> Self

Determines the level of detail about either provisioned or on-demand throughput consumption that is returned in the response:

• INDEXES - The response includes the aggregate ConsumedCapacity for the operation, together with ConsumedCapacity for each table and secondary index that was accessed.

  Note that some operations, such as GetItem and BatchGetItem, do not access any indexes at all. In these cases, specifying INDEXES will only return ConsumedCapacity information for table(s).

• TOTAL - The response includes only the aggregate ConsumedCapacity for the operation.

• NONE - No ConsumedCapacity details are included in the response.

Examples found in repository

src/client.rs (line 7861)

        pub fn set_return_consumed_capacity(
            mut self,
            input: std::option::Option<crate::model::ReturnConsumedCapacity>,
        ) -> Self {
            self.inner = self.inner.set_return_consumed_capacity(input);
            self
        }

pub fn return_item_collection_metrics(
    self,
    input: ReturnItemCollectionMetrics
) -> Self

Determines whether item collection metrics are returned. If set to SIZE, the response includes statistics about item collections, if any, that were modified during the operation are returned in the response. If set to NONE (the default), no statistics are returned.

Examples found in repository

src/client.rs (line 7869)

        pub fn return_item_collection_metrics(
            mut self,
            input: crate::model::ReturnItemCollectionMetrics,
        ) -> Self {
            self.inner = self.inner.return_item_collection_metrics(input);
            self
        }

pub fn set_return_item_collection_metrics(
    self,
    input: Option<ReturnItemCollectionMetrics>
) -> Self

Determines whether item collection metrics are returned. If set to SIZE, the response includes statistics about item collections, if any, that were modified during the operation are returned in the response. If set to NONE (the default), no statistics are returned.

Examples found in repository

src/client.rs (line 7877)

        pub fn set_return_item_collection_metrics(
            mut self,
            input: std::option::Option<crate::model::ReturnItemCollectionMetrics>,
        ) -> Self {
            self.inner = self.inner.set_return_item_collection_metrics(input);
            self
        }

pub fn update_expression(self, input: impl Into<String>) -> Self

An expression that defines one or more attributes to be updated, the action to be performed on them, and new values for them.

The following action values are available for UpdateExpression.

• SET - Adds one or more attributes and values to an item. If any of these attributes already exist, they are replaced by the new values. You can also use SET to add or subtract from an attribute that is of type Number. For example: SET myNum = myNum + :val

  SET supports the following functions:

  • if_not_exists (path, operand) - if the item does not contain an attribute at the specified path, then if_not_exists evaluates to operand; otherwise, it evaluates to path. You can use this function to avoid overwriting an attribute that may already be present in the item.

  • list_append (operand, operand) - evaluates to a list with a new element added to it. You can append the new element to the start or the end of the list by reversing the order of the operands.

  These function names are case-sensitive.

• REMOVE - Removes one or more attributes from an item.

• ADD - Adds the specified value to the item, if the attribute does not already exist. If the attribute does exist, then the behavior of ADD depends on the data type of the attribute:

  • If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.

    If you use ADD to increment or decrement a number value for an item that doesn't exist before the update, DynamoDB uses 0 as the initial value.

    Similarly, if you use ADD for an existing item to increment or decrement an attribute value that doesn't exist before the update, DynamoDB uses 0 as the initial value. For example, suppose that the item you want to update doesn't have an attribute named itemcount, but you decide to ADD the number 3 to this attribute anyway. DynamoDB will create the itemcount attribute, set its initial value to 0, and finally add 3 to it. The result will be a new itemcount attribute in the item, with a value of 3.

  • If the existing data type is a set and if Value is also a set, then Value is added to the existing set. For example, if the attribute value is the set [1,2], and the ADD action specified [3], then the final attribute value is [1,2,3]. An error occurs if an ADD action is specified for a set attribute and the attribute type specified does not match the existing set type.

    Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, the Value must also be a set of strings.

  The ADD action only supports Number and set data types. In addition, ADD can only be used on top-level attributes, not nested attributes.

• DELETE - Deletes an element from a set.

  If a set of values is specified, then those values are subtracted from the old set. For example, if the attribute value was the set [a,b,c] and the DELETE action specifies [a,c], then the final attribute value is [b]. Specifying an empty set is an error.

  The DELETE action only supports set data types. In addition, DELETE can only be used on top-level attributes, not nested attributes.

You can have many actions in a single expression, such as the following: SET a=:value1, b=:value2 DELETE :value3, :value4, :value5

For more information on update expressions, see Modifying Items and Attributes in the Amazon DynamoDB Developer Guide.

Examples found in repository

src/client.rs (line 7906)

        pub fn update_expression(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.update_expression(input.into());
            self
        }

pub fn set_update_expression(self, input: Option<String>) -> Self

An expression that defines one or more attributes to be updated, the action to be performed on them, and new values for them.

The following action values are available for UpdateExpression.

• SET - Adds one or more attributes and values to an item. If any of these attributes already exist, they are replaced by the new values. You can also use SET to add or subtract from an attribute that is of type Number. For example: SET myNum = myNum + :val

  SET supports the following functions:

  • if_not_exists (path, operand) - if the item does not contain an attribute at the specified path, then if_not_exists evaluates to operand; otherwise, it evaluates to path. You can use this function to avoid overwriting an attribute that may already be present in the item.

  • list_append (operand, operand) - evaluates to a list with a new element added to it. You can append the new element to the start or the end of the list by reversing the order of the operands.

  These function names are case-sensitive.

• REMOVE - Removes one or more attributes from an item.

• ADD - Adds the specified value to the item, if the attribute does not already exist. If the attribute does exist, then the behavior of ADD depends on the data type of the attribute:

  • If the existing attribute is a number, and if Value is also a number, then Value is mathematically added to the existing attribute. If Value is a negative number, then it is subtracted from the existing attribute.

    If you use ADD to increment or decrement a number value for an item that doesn't exist before the update, DynamoDB uses 0 as the initial value.

    Similarly, if you use ADD for an existing item to increment or decrement an attribute value that doesn't exist before the update, DynamoDB uses 0 as the initial value. For example, suppose that the item you want to update doesn't have an attribute named itemcount, but you decide to ADD the number 3 to this attribute anyway. DynamoDB will create the itemcount attribute, set its initial value to 0, and finally add 3 to it. The result will be a new itemcount attribute in the item, with a value of 3.

  • If the existing data type is a set and if Value is also a set, then Value is added to the existing set. For example, if the attribute value is the set [1,2], and the ADD action specified [3], then the final attribute value is [1,2,3]. An error occurs if an ADD action is specified for a set attribute and the attribute type specified does not match the existing set type.

    Both sets must have the same primitive data type. For example, if the existing data type is a set of strings, the Value must also be a set of strings.

  The ADD action only supports Number and set data types. In addition, ADD can only be used on top-level attributes, not nested attributes.

• DELETE - Deletes an element from a set.

  If a set of values is specified, then those values are subtracted from the old set. For example, if the attribute value was the set [a,b,c] and the DELETE action specifies [a,c], then the final attribute value is [b]. Specifying an empty set is an error.

  The DELETE action only supports set data types. In addition, DELETE can only be used on top-level attributes, not nested attributes.

You can have many actions in a single expression, such as the following: SET a=:value1, b=:value2 DELETE :value3, :value4, :value5

For more information on update expressions, see Modifying Items and Attributes in the Amazon DynamoDB Developer Guide.

Examples found in repository

src/client.rs (line 7938)

        pub fn set_update_expression(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_update_expression(input);
            self
        }

pub fn condition_expression(self, input: impl Into<String>) -> Self

A condition that must be satisfied in order for a conditional update to succeed.

An expression can contain any of the following:

• Functions: attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size

  These function names are case-sensitive.

• Comparison operators: = | <> | < | > | <= | >= | BETWEEN | IN

• Logical operators: AND | OR | NOT

For more information about condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.

Examples found in repository

src/client.rs (line 7950)

        pub fn condition_expression(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.condition_expression(input.into());
            self
        }

pub fn set_condition_expression(self, input: Option<String>) -> Self

A condition that must be satisfied in order for a conditional update to succeed.

An expression can contain any of the following:

• Functions: attribute_exists | attribute_not_exists | attribute_type | contains | begins_with | size

  These function names are case-sensitive.

• Comparison operators: = | <> | < | > | <= | >= | BETWEEN | IN

• Logical operators: AND | OR | NOT

For more information about condition expressions, see Specifying Conditions in the Amazon DynamoDB Developer Guide.

Examples found in repository

src/client.rs (line 7965)

        pub fn set_condition_expression(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_condition_expression(input);
            self
        }

pub fn expression_attribute_names(
    self,
    k: impl Into<String>,
    v: impl Into<String>
) -> Self

Adds a key-value pair to expression_attribute_names.

To override the contents of this collection use set_expression_attribute_names.

One or more substitution tokens for attribute names in an expression. The following are some use cases for using ExpressionAttributeNames:

• To access an attribute whose name conflicts with a DynamoDB reserved word.

• To create a placeholder for repeating occurrences of an attribute name in an expression.

• To prevent special characters in an attribute name from being misinterpreted in an expression.

Use the # character in an expression to dereference an attribute name. For example, consider the following attribute name:

• Percentile

The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide.) To work around this, you could specify the following for ExpressionAttributeNames:

• {"#P":"Percentile"}

You could then use this substitution in an expression, as in this example:

• #P = :val

Tokens that begin with the : character are expression attribute values, which are placeholders for the actual value at runtime.

For more information about expression attribute names, see Specifying Item Attributes in the Amazon DynamoDB Developer Guide.

Examples found in repository

src/client.rs (line 7998)

        pub fn expression_attribute_names(
            mut self,
            k: impl Into<std::string::String>,
            v: impl Into<std::string::String>,
        ) -> Self {
            self.inner = self.inner.expression_attribute_names(k.into(), v.into());
            self
        }

pub fn set_expression_attribute_names(
    self,
    input: Option<HashMap<String, String>>
) -> Self

One or more substitution tokens for attribute names in an expression. The following are some use cases for using ExpressionAttributeNames:

• To access an attribute whose name conflicts with a DynamoDB reserved word.

• To create a placeholder for repeating occurrences of an attribute name in an expression.

• To prevent special characters in an attribute name from being misinterpreted in an expression.

Use the # character in an expression to dereference an attribute name. For example, consider the following attribute name:

• Percentile

The name of this attribute conflicts with a reserved word, so it cannot be used directly in an expression. (For the complete list of reserved words, see Reserved Words in the Amazon DynamoDB Developer Guide.) To work around this, you could specify the following for ExpressionAttributeNames:

• {"#P":"Percentile"}

You could then use this substitution in an expression, as in this example:

• #P = :val

Tokens that begin with the : character are expression attribute values, which are placeholders for the actual value at runtime.

For more information about expression attribute names, see Specifying Item Attributes in the Amazon DynamoDB Developer Guide.

Examples found in repository

src/client.rs (line 8028)

        pub fn set_expression_attribute_names(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, std::string::String>,
            >,
        ) -> Self {
            self.inner = self.inner.set_expression_attribute_names(input);
            self
        }

pub fn expression_attribute_values(
    self,
    k: impl Into<String>,
    v: AttributeValue
) -> Self

Adds a key-value pair to expression_attribute_values.

To override the contents of this collection use set_expression_attribute_values.

One or more values that can be substituted in an expression.

Use the : (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the ProductStatus attribute was one of the following:

Available | Backordered | Discontinued

You would first need to specify ExpressionAttributeValues as follows:

{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }

You could then use these values in an expression, such as this:

ProductStatus IN (:avail, :back, :disc)

For more information on expression attribute values, see Condition Expressions in the Amazon DynamoDB Developer Guide.

Examples found in repository

src/client.rs (line 8048)

        pub fn expression_attribute_values(
            mut self,
            k: impl Into<std::string::String>,
            v: crate::model::AttributeValue,
        ) -> Self {
            self.inner = self.inner.expression_attribute_values(k.into(), v);
            self
        }

pub fn set_expression_attribute_values(
    self,
    input: Option<HashMap<String, AttributeValue>>
) -> Self

One or more values that can be substituted in an expression.

Use the : (colon) character in an expression to dereference an attribute value. For example, suppose that you wanted to check whether the value of the ProductStatus attribute was one of the following:

Available | Backordered | Discontinued

You would first need to specify ExpressionAttributeValues as follows:

{ ":avail":{"S":"Available"}, ":back":{"S":"Backordered"}, ":disc":{"S":"Discontinued"} }

You could then use these values in an expression, such as this:

ProductStatus IN (:avail, :back, :disc)

For more information on expression attribute values, see Condition Expressions in the Amazon DynamoDB Developer Guide.

Examples found in repository

src/client.rs (line 8065)

        pub fn set_expression_attribute_values(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, crate::model::AttributeValue>,
            >,
        ) -> Self {
            self.inner = self.inner.set_expression_attribute_values(input);
            self
        }

pub fn build(self) -> Result<UpdateItemInput, BuildError>

Consumes the builder and constructs a UpdateItemInput.

Examples found in repository

src/client.rs (line 7679)

        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::operation::customize::CustomizableOperation<
                crate::operation::UpdateItem,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::UpdateItemError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            Ok(crate::operation::customize::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::UpdateItemOutput,
            aws_smithy_http::result::SdkError<crate::error::UpdateItemError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&self.handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            self.handle.client.call(op).await
        }

Trait Implementations

impl Clone for Builder

fn clone(&self) -> Builder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Builder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Builder

fn default() -> Builder

Returns the “default value” for a type.

impl PartialEq<Builder> for Builder

fn eq(&self, other: &Builder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for Builder