Enum CreateDBClusterError

Source
#[non_exhaustive]
pub enum CreateDBClusterError {
Show 18 variants DbClusterAlreadyExistsFault(DbClusterAlreadyExistsFault), DbClusterNotFoundFault(DbClusterNotFoundFault), DbClusterParameterGroupNotFoundFault(DbClusterParameterGroupNotFoundFault), DbClusterQuotaExceededFault(DbClusterQuotaExceededFault), DbInstanceNotFoundFault(DbInstanceNotFoundFault), DbSubnetGroupDoesNotCoverEnoughAZs(DbSubnetGroupDoesNotCoverEnoughAZs), DbSubnetGroupNotFoundFault(DbSubnetGroupNotFoundFault), GlobalClusterNotFoundFault(GlobalClusterNotFoundFault), InsufficientStorageClusterCapacityFault(InsufficientStorageClusterCapacityFault), InvalidDbClusterStateFault(InvalidDbClusterStateFault), InvalidDbInstanceStateFault(InvalidDbInstanceStateFault), InvalidDbSubnetGroupStateFault(InvalidDbSubnetGroupStateFault), InvalidGlobalClusterStateFault(InvalidGlobalClusterStateFault), InvalidSubnet(InvalidSubnet), InvalidVpcNetworkStateFault(InvalidVpcNetworkStateFault), KmsKeyNotAccessibleFault(KmsKeyNotAccessibleFault), StorageQuotaExceededFault(StorageQuotaExceededFault), Unhandled(Unhandled),
}
Expand description

Error type for the CreateDBClusterError operation.

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

DbClusterAlreadyExistsFault(DbClusterAlreadyExistsFault)

You already have a cluster with the given identifier.

§

DbClusterNotFoundFault(DbClusterNotFoundFault)

DBClusterIdentifier doesn't refer to an existing cluster.

§

DbClusterParameterGroupNotFoundFault(DbClusterParameterGroupNotFoundFault)

DBClusterParameterGroupName doesn't refer to an existing cluster parameter group.

§

DbClusterQuotaExceededFault(DbClusterQuotaExceededFault)

The cluster can't be created because you have reached the maximum allowed quota of clusters.

§

DbInstanceNotFoundFault(DbInstanceNotFoundFault)

DBInstanceIdentifier doesn't refer to an existing instance.

§

DbSubnetGroupDoesNotCoverEnoughAZs(DbSubnetGroupDoesNotCoverEnoughAZs)

Subnets in the subnet group should cover at least two Availability Zones unless there is only one Availability Zone.

§

DbSubnetGroupNotFoundFault(DbSubnetGroupNotFoundFault)

DBSubnetGroupName doesn't refer to an existing subnet group.

§

GlobalClusterNotFoundFault(GlobalClusterNotFoundFault)

The GlobalClusterIdentifier doesn't refer to an existing global cluster.

§

InsufficientStorageClusterCapacityFault(InsufficientStorageClusterCapacityFault)

There is not enough storage available for the current action. You might be able to resolve this error by updating your subnet group to use different Availability Zones that have more storage available.

§

InvalidDbClusterStateFault(InvalidDbClusterStateFault)

The cluster isn't in a valid state.

§

InvalidDbInstanceStateFault(InvalidDbInstanceStateFault)

The specified instance isn't in the available state.

§

InvalidDbSubnetGroupStateFault(InvalidDbSubnetGroupStateFault)

The subnet group can't be deleted because it's in use.

§

InvalidGlobalClusterStateFault(InvalidGlobalClusterStateFault)

The requested operation can't be performed while the cluster is in this state.

§

InvalidSubnet(InvalidSubnet)

The requested subnet is not valid, or multiple subnets were requested that are not all in a common virtual private cloud (VPC).

§

InvalidVpcNetworkStateFault(InvalidVpcNetworkStateFault)

The subnet group doesn't cover all Availability Zones after it is created because of changes that were made.

§

KmsKeyNotAccessibleFault(KmsKeyNotAccessibleFault)

An error occurred when accessing an KMS key.

§

StorageQuotaExceededFault(StorageQuotaExceededFault)

The request would cause you to exceed the allowed amount of storage available across all instances.

§

Unhandled(Unhandled)

👎Deprecated: Matching Unhandled directly is not forwards compatible. Instead, match using a variable wildcard pattern and check .code():    err if err.code() == Some("SpecificExceptionCode") => { /* handle the error */ } See ProvideErrorMetadata for what information is available for the error.

An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).

Implementations§

Source§

impl CreateDBClusterError

Source

pub fn unhandled(err: impl Into<Box<dyn Error + Send + Sync + 'static>>) -> Self

Creates the CreateDBClusterError::Unhandled variant from any error type.

Source

pub fn generic(err: ErrorMetadata) -> Self

Creates the CreateDBClusterError::Unhandled variant from an ErrorMetadata.

Source

pub fn meta(&self) -> &ErrorMetadata

Returns error metadata, which includes the error code, message, request ID, and potentially additional information.

Source

pub fn is_db_cluster_already_exists_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::DbClusterAlreadyExistsFault.

Source

pub fn is_db_cluster_not_found_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::DbClusterNotFoundFault.

Source

pub fn is_db_cluster_parameter_group_not_found_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::DbClusterParameterGroupNotFoundFault.

Source

pub fn is_db_cluster_quota_exceeded_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::DbClusterQuotaExceededFault.

Source

pub fn is_db_instance_not_found_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::DbInstanceNotFoundFault.

Source

pub fn is_db_subnet_group_does_not_cover_enough_azs(&self) -> bool

Returns true if the error kind is CreateDBClusterError::DbSubnetGroupDoesNotCoverEnoughAZs.

Source

pub fn is_db_subnet_group_not_found_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::DbSubnetGroupNotFoundFault.

Source

pub fn is_global_cluster_not_found_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::GlobalClusterNotFoundFault.

Source

pub fn is_insufficient_storage_cluster_capacity_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::InsufficientStorageClusterCapacityFault.

Source

pub fn is_invalid_db_cluster_state_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::InvalidDbClusterStateFault.

Source

pub fn is_invalid_db_instance_state_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::InvalidDbInstanceStateFault.

Source

pub fn is_invalid_db_subnet_group_state_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::InvalidDbSubnetGroupStateFault.

Source

pub fn is_invalid_global_cluster_state_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::InvalidGlobalClusterStateFault.

Source

pub fn is_invalid_subnet(&self) -> bool

Returns true if the error kind is CreateDBClusterError::InvalidSubnet.

Source

pub fn is_invalid_vpc_network_state_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::InvalidVpcNetworkStateFault.

Source

pub fn is_kms_key_not_accessible_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::KmsKeyNotAccessibleFault.

Source

pub fn is_storage_quota_exceeded_fault(&self) -> bool

Returns true if the error kind is CreateDBClusterError::StorageQuotaExceededFault.

Trait Implementations§

Source§

impl CreateUnhandledError for CreateDBClusterError

Source§

fn create_unhandled_error( source: Box<dyn Error + Send + Sync + 'static>, meta: Option<ErrorMetadata>, ) -> Self

Creates an unhandled error variant with the given source and error metadata.
Source§

impl Debug for CreateDBClusterError

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Display for CreateDBClusterError

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Error for CreateDBClusterError

Source§

fn source(&self) -> Option<&(dyn Error + 'static)>

Returns the lower-level source of this error, if any. Read more
1.0.0 · Source§

fn description(&self) -> &str

👎Deprecated since 1.42.0: use the Display impl or to_string()
1.0.0 · Source§

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0: replaced by Error::source, which can support downcasting
Source§

fn provide<'a>(&'a self, request: &mut Request<'a>)

🔬This is a nightly-only experimental API. (error_generic_member_access)
Provides type-based access to context intended for error reports. Read more
Source§

impl From<CreateDBClusterError> for Error

Source§

fn from(err: CreateDBClusterError) -> Self

Converts to this type from the input type.
Source§

impl ProvideErrorKind for CreateDBClusterError

Source§

fn code(&self) -> Option<&str>

Returns the code for this error if one exists
Source§

fn retryable_error_kind(&self) -> Option<ErrorKind>

Returns the ErrorKind when the error is modeled as retryable Read more
Source§

impl ProvideErrorMetadata for CreateDBClusterError

Source§

fn meta(&self) -> &ErrorMetadata

Returns error metadata, which includes the error code, message, request ID, and potentially additional information.
Source§

fn code(&self) -> Option<&str>

Returns the error code if it’s available.
Source§

fn message(&self) -> Option<&str>

Returns the error message, if there is one.
Source§

impl RequestId for CreateDBClusterError

Source§

fn request_id(&self) -> Option<&str>

Returns the request ID, or None if the service could not be reached.

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

Source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
Source§

impl<T> Paint for T
where T: ?Sized,

Source§

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();
Source§

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example
println!("{}", value.primary());
Source§

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example
println!("{}", value.fixed(color));
Source§

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example
println!("{}", value.rgb(r, g, b));
Source§

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example
println!("{}", value.black());
Source§

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example
println!("{}", value.red());
Source§

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example
println!("{}", value.green());
Source§

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example
println!("{}", value.yellow());
Source§

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example
println!("{}", value.blue());
Source§

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example
println!("{}", value.magenta());
Source§

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example
println!("{}", value.cyan());
Source§

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example
println!("{}", value.white());
Source§

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example
println!("{}", value.bright_black());
Source§

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example
println!("{}", value.bright_red());
Source§

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example
println!("{}", value.bright_green());
Source§

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example
println!("{}", value.bright_yellow());
Source§

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example
println!("{}", value.bright_blue());
Source§

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.bright_magenta());
Source§

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example
println!("{}", value.bright_cyan());
Source§

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example
println!("{}", value.bright_white());
Source§

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();
Source§

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example
println!("{}", value.on_primary());
Source§

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example
println!("{}", value.on_fixed(color));
Source§

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example
println!("{}", value.on_rgb(r, g, b));
Source§

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example
println!("{}", value.on_black());
Source§

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example
println!("{}", value.on_red());
Source§

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example
println!("{}", value.on_green());
Source§

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example
println!("{}", value.on_yellow());
Source§

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example
println!("{}", value.on_blue());
Source§

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example
println!("{}", value.on_magenta());
Source§

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example
println!("{}", value.on_cyan());
Source§

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example
println!("{}", value.on_white());
Source§

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example
println!("{}", value.on_bright_black());
Source§

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example
println!("{}", value.on_bright_red());
Source§

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example
println!("{}", value.on_bright_green());
Source§

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example
println!("{}", value.on_bright_yellow());
Source§

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example
println!("{}", value.on_bright_blue());
Source§

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example
println!("{}", value.on_bright_magenta());
Source§

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example
println!("{}", value.on_bright_cyan());
Source§

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example
println!("{}", value.on_bright_white());
Source§

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();
Source§

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example
println!("{}", value.bold());
Source§

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example
println!("{}", value.dim());
Source§

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example
println!("{}", value.italic());
Source§

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example
println!("{}", value.underline());

Returns self with the attr() set to [Attribute :: Blink].

§Example
println!("{}", value.blink());

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example
println!("{}", value.rapid_blink());
Source§

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example
println!("{}", value.invert());
Source§

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example
println!("{}", value.conceal());
Source§

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example
println!("{}", value.strike());
Source§

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();
Source§

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example
println!("{}", value.mask());
Source§

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example
println!("{}", value.wrap());
Source§

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example
println!("{}", value.linger());
Source§

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example
println!("{}", value.clear());
Source§

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example
println!("{}", value.resetting());
Source§

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example
println!("{}", value.bright());
Source§

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example
println!("{}", value.on_bright());
Source§

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);
Source§

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more
Source§

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToString for T
where T: Display + ?Sized,

Source§

fn to_string(&self) -> String

Converts the given value to a String. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

impl<T> ErasedDestructor for T
where T: 'static,