NewPrivateVirtualInterfaceBuilder

aws_sdk_directconnect::types::builders

Struct NewPrivateVirtualInterfaceBuilder

#[non_exhaustive]
pub struct NewPrivateVirtualInterfaceBuilder { /* private fields */ }

Expand description

A builder for NewPrivateVirtualInterface.

Implementations§

impl NewPrivateVirtualInterfaceBuilder

pub fn virtual_interface_name(self, input: impl Into<String>) -> Self

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

This field is required.

pub fn set_virtual_interface_name(self, input: Option<String>) -> Self

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

pub fn get_virtual_interface_name(&self) -> &Option<String>

The name of the virtual interface assigned by the customer network. The name has a maximum of 100 characters. The following are valid characters: a-z, 0-9 and a hyphen (-).

pub fn vlan(self, input: i32) -> Self

The ID of the VLAN.

This field is required.

pub fn set_vlan(self, input: Option<i32>) -> Self

The ID of the VLAN.

pub fn get_vlan(&self) -> &Option<i32>

The ID of the VLAN.

pub fn asn(self, input: i32) -> Self

The autonomous system number (ASN). The valid range is from 1 to 2147483646 for Border Gateway Protocol (BGP) configuration. If you provide a number greater than the maximum, an error is returned. Use asnLong instead.

You can use asnLong or asn, but not both. We recommend using asnLong as it supports a greater pool of numbers.

The asnLong attribute accepts both ASN and long ASN ranges.
If you provide a value in the same API call for both asn and asnLong, the API will only accept the value for asnLong.

The valid values are 1-2147483646.

pub fn set_asn(self, input: Option<i32>) -> Self

The autonomous system number (ASN). The valid range is from 1 to 2147483646 for Border Gateway Protocol (BGP) configuration. If you provide a number greater than the maximum, an error is returned. Use asnLong instead.

You can use asnLong or asn, but not both. We recommend using asnLong as it supports a greater pool of numbers.

The asnLong attribute accepts both ASN and long ASN ranges.
If you provide a value in the same API call for both asn and asnLong, the API will only accept the value for asnLong.

The valid values are 1-2147483646.

pub fn get_asn(&self) -> &Option<i32>

The autonomous system number (ASN). The valid range is from 1 to 2147483646 for Border Gateway Protocol (BGP) configuration. If you provide a number greater than the maximum, an error is returned. Use asnLong instead.

You can use asnLong or asn, but not both. We recommend using asnLong as it supports a greater pool of numbers.

The asnLong attribute accepts both ASN and long ASN ranges.
If you provide a value in the same API call for both asn and asnLong, the API will only accept the value for asnLong.

The valid values are 1-2147483646.

pub fn asn_long(self, input: i64) -> Self

The long ASN for a new private virtual interface. The valid range is from 1 to 4294967294 for BGP configuration.

You can use asnLong or asn, but not both. We recommend using asnLong as it supports a greater pool of numbers.

The asnLong attribute accepts both ASN and long ASN ranges.
If you provide a value in the same API call for both asn and asnLong, the API will only accept the value for asnLong.

pub fn set_asn_long(self, input: Option<i64>) -> Self

The long ASN for a new private virtual interface. The valid range is from 1 to 4294967294 for BGP configuration.

You can use asnLong or asn, but not both. We recommend using asnLong as it supports a greater pool of numbers.

The asnLong attribute accepts both ASN and long ASN ranges.
If you provide a value in the same API call for both asn and asnLong, the API will only accept the value for asnLong.

pub fn get_asn_long(&self) -> &Option<i64>

The long ASN for a new private virtual interface. The valid range is from 1 to 4294967294 for BGP configuration.

You can use asnLong or asn, but not both. We recommend using asnLong as it supports a greater pool of numbers.

The asnLong attribute accepts both ASN and long ASN ranges.
If you provide a value in the same API call for both asn and asnLong, the API will only accept the value for asnLong.

pub fn mtu(self, input: i32) -> Self

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500.

pub fn set_mtu(self, input: Option<i32>) -> Self

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500.

pub fn get_mtu(&self) -> &Option<i32>

The maximum transmission unit (MTU), in bytes. The supported values are 1500 and 8500. The default value is 1500.

pub fn auth_key(self, input: impl Into<String>) -> Self

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

pub fn set_auth_key(self, input: Option<String>) -> Self

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

pub fn get_auth_key(&self) -> &Option<String>

The authentication key for BGP configuration. This string has a minimum length of 6 characters and and a maximun lenth of 80 characters.

pub fn amazon_address(self, input: impl Into<String>) -> Self

The IP address assigned to the Amazon interface.

pub fn set_amazon_address(self, input: Option<String>) -> Self

The IP address assigned to the Amazon interface.

pub fn get_amazon_address(&self) -> &Option<String>

The IP address assigned to the Amazon interface.

pub fn customer_address(self, input: impl Into<String>) -> Self

The IP address assigned to the customer interface.

pub fn set_customer_address(self, input: Option<String>) -> Self

The IP address assigned to the customer interface.

pub fn get_customer_address(&self) -> &Option<String>

The IP address assigned to the customer interface.

pub fn address_family(self, input: AddressFamily) -> Self

The address family for the BGP peer.

pub fn set_address_family(self, input: Option<AddressFamily>) -> Self

The address family for the BGP peer.

pub fn get_address_family(&self) -> &Option<AddressFamily>

The address family for the BGP peer.

pub fn virtual_gateway_id(self, input: impl Into<String>) -> Self

The ID of the virtual private gateway.

pub fn set_virtual_gateway_id(self, input: Option<String>) -> Self

The ID of the virtual private gateway.

pub fn get_virtual_gateway_id(&self) -> &Option<String>

The ID of the virtual private gateway.

pub fn direct_connect_gateway_id(self, input: impl Into<String>) -> Self

The ID of the Direct Connect gateway.

pub fn set_direct_connect_gateway_id(self, input: Option<String>) -> Self

The ID of the Direct Connect gateway.

pub fn get_direct_connect_gateway_id(&self) -> &Option<String>

The ID of the Direct Connect gateway.

pub fn tags(self, input: Tag) -> Self

Appends an item to tags.

To override the contents of this collection use set_tags.

The tags associated with the private virtual interface.

pub fn set_tags(self, input: Option<Vec<Tag>>) -> Self

The tags associated with the private virtual interface.

pub fn get_tags(&self) -> &Option<Vec<Tag>>

The tags associated with the private virtual interface.

pub fn enable_site_link(self, input: bool) -> Self

Indicates whether to enable or disable SiteLink.

pub fn set_enable_site_link(self, input: Option<bool>) -> Self

Indicates whether to enable or disable SiteLink.

pub fn get_enable_site_link(&self) -> &Option<bool>

Indicates whether to enable or disable SiteLink.

pub fn build(self) -> Result<NewPrivateVirtualInterface, BuildError>

Consumes the builder and constructs a NewPrivateVirtualInterface. This method will fail if any of the following fields are not set:

virtual_interface_name

Trait Implementations§

impl Clone for NewPrivateVirtualInterfaceBuilder

fn clone(&self) -> NewPrivateVirtualInterfaceBuilder

Returns a duplicate of the value. Read more

1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Debug for NewPrivateVirtualInterfaceBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Default for NewPrivateVirtualInterfaceBuilder

fn default() -> NewPrivateVirtualInterfaceBuilder

Returns the “default value” for a type. Read more

impl PartialEq for NewPrivateVirtualInterfaceBuilder

fn eq(&self, other: &NewPrivateVirtualInterfaceBuilder) -> bool

Tests for self and other values to be equal, and is used by ==.

1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for NewPrivateVirtualInterfaceBuilder

Auto Trait Implementations§

impl Freeze for NewPrivateVirtualInterfaceBuilder

impl RefUnwindSafe for NewPrivateVirtualInterfaceBuilder

impl Send for NewPrivateVirtualInterfaceBuilder

impl Sync for NewPrivateVirtualInterfaceBuilder

impl Unpin for NewPrivateVirtualInterfaceBuilder

impl UnwindSafe for NewPrivateVirtualInterfaceBuilder

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dest. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T> Instrument for T

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T> IntoEither for T

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more

impl<Unshared, Shared> IntoShared<Shared> for Unshared
where Shared: FromUnshared<Unshared>,

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.

impl<T> Paint for T
where T: ?Sized,

fn fg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the foreground set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like red() and green(), which have the same functionality but are pithier.

§Example

Set foreground color to white using fg():

use yansi::{Paint, Color};

painted.fg(Color::White);

Set foreground color to white using white().

use yansi::Paint;

painted.white();

fn primary(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Primary].

§Example

println!("{}", value.primary());

fn fixed(&self, color: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Fixed].

§Example

println!("{}", value.fixed(color));

fn rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the fg() set to [Color :: Rgb].

§Example

println!("{}", value.rgb(r, g, b));

fn black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Black].

§Example

println!("{}", value.black());

fn red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Red].

§Example

println!("{}", value.red());

fn green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Green].

§Example

println!("{}", value.green());

fn yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Yellow].

§Example

println!("{}", value.yellow());

fn blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Blue].

§Example

println!("{}", value.blue());

fn magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Magenta].

§Example

println!("{}", value.magenta());

fn cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: Cyan].

§Example

println!("{}", value.cyan());

fn white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: White].

§Example

println!("{}", value.white());

fn bright_black(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlack].

§Example

println!("{}", value.bright_black());

fn bright_red(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightRed].

§Example

println!("{}", value.bright_red());

fn bright_green(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightGreen].

§Example

println!("{}", value.bright_green());

fn bright_yellow(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightYellow].

§Example

println!("{}", value.bright_yellow());

fn bright_blue(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightBlue].

§Example

println!("{}", value.bright_blue());

fn bright_magenta(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightMagenta].

§Example

println!("{}", value.bright_magenta());

fn bright_cyan(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightCyan].

§Example

println!("{}", value.bright_cyan());

fn bright_white(&self) -> Painted<&T>

Returns self with the fg() set to [Color :: BrightWhite].

§Example

println!("{}", value.bright_white());

fn bg(&self, value: Color) -> Painted<&T>

Returns a styled value derived from self with the background set to value.

This method should be used rarely. Instead, prefer to use color-specific builder methods like on_red() and on_green(), which have the same functionality but are pithier.

§Example

Set background color to red using fg():

use yansi::{Paint, Color};

painted.bg(Color::Red);

Set background color to red using on_red().

use yansi::Paint;

painted.on_red();

fn on_primary(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Primary].

§Example

println!("{}", value.on_primary());

fn on_fixed(&self, color: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Fixed].

§Example

println!("{}", value.on_fixed(color));

fn on_rgb(&self, r: u8, g: u8, b: u8) -> Painted<&T>

Returns self with the bg() set to [Color :: Rgb].

§Example

println!("{}", value.on_rgb(r, g, b));

fn on_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Black].

§Example

println!("{}", value.on_black());

fn on_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Red].

§Example

println!("{}", value.on_red());

fn on_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Green].

§Example

println!("{}", value.on_green());

fn on_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Yellow].

§Example

println!("{}", value.on_yellow());

fn on_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Blue].

§Example

println!("{}", value.on_blue());

fn on_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Magenta].

§Example

println!("{}", value.on_magenta());

fn on_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: Cyan].

§Example

println!("{}", value.on_cyan());

fn on_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: White].

§Example

println!("{}", value.on_white());

fn on_bright_black(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlack].

§Example

println!("{}", value.on_bright_black());

fn on_bright_red(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightRed].

§Example

println!("{}", value.on_bright_red());

fn on_bright_green(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightGreen].

§Example

println!("{}", value.on_bright_green());

fn on_bright_yellow(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightYellow].

§Example

println!("{}", value.on_bright_yellow());

fn on_bright_blue(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightBlue].

§Example

println!("{}", value.on_bright_blue());

fn on_bright_magenta(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightMagenta].

§Example

println!("{}", value.on_bright_magenta());

fn on_bright_cyan(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightCyan].

§Example

println!("{}", value.on_bright_cyan());

fn on_bright_white(&self) -> Painted<&T>

Returns self with the bg() set to [Color :: BrightWhite].

§Example

println!("{}", value.on_bright_white());

fn attr(&self, value: Attribute) -> Painted<&T>

Enables the styling Attribute value.

This method should be used rarely. Instead, prefer to use attribute-specific builder methods like bold() and underline(), which have the same functionality but are pithier.

§Example

Make text bold using attr():

use yansi::{Paint, Attribute};

painted.attr(Attribute::Bold);

Make text bold using using bold().

use yansi::Paint;

painted.bold();

fn bold(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Bold].

§Example

println!("{}", value.bold());

fn dim(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Dim].

§Example

println!("{}", value.dim());

fn italic(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Italic].

§Example

println!("{}", value.italic());

fn underline(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Underline].

§Example

println!("{}", value.underline());

fn blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Blink].

§Example

println!("{}", value.blink());

fn rapid_blink(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: RapidBlink].

§Example

println!("{}", value.rapid_blink());

fn invert(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Invert].

§Example

println!("{}", value.invert());

fn conceal(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Conceal].

§Example

println!("{}", value.conceal());

fn strike(&self) -> Painted<&T>

Returns self with the attr() set to [Attribute :: Strike].

§Example

println!("{}", value.strike());

fn quirk(&self, value: Quirk) -> Painted<&T>

Enables the yansi Quirk value.

This method should be used rarely. Instead, prefer to use quirk-specific builder methods like mask() and wrap(), which have the same functionality but are pithier.

§Example

Enable wrapping using .quirk():

use yansi::{Paint, Quirk};

painted.quirk(Quirk::Wrap);

Enable wrapping using wrap().

use yansi::Paint;

painted.wrap();

fn mask(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Mask].

§Example

println!("{}", value.mask());

fn wrap(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Wrap].

§Example

println!("{}", value.wrap());

fn linger(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Linger].

§Example

println!("{}", value.linger());

fn clear(&self) -> Painted<&T>

👎Deprecated since 1.0.1: renamed to resetting() due to conflicts with Vec::clear(). The clear() method will be removed in a future release.

Returns self with the quirk() set to [Quirk :: Clear].

§Example

println!("{}", value.clear());

fn resetting(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Resetting].

§Example

println!("{}", value.resetting());

fn bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: Bright].

§Example

println!("{}", value.bright());

fn on_bright(&self) -> Painted<&T>

Returns self with the quirk() set to [Quirk :: OnBright].

§Example

println!("{}", value.on_bright());

fn whenever(&self, value: Condition) -> Painted<&T>

Conditionally enable styling based on whether the Condition value applies. Replaces any previous condition.

See the crate level docs for more details.

§Example

Enable styling painted only when both stdout and stderr are TTYs:

use yansi::{Paint, Condition};

painted.red().on_yellow().whenever(Condition::STDOUTERR_ARE_TTY);

fn new(self) -> Painted<Self>
where Self: Sized,

Create a new Painted with a default Style. Read more

fn paint<S>(&self, style: S) -> Painted<&Self>
where S: Into<Style>,

Apply a style wholesale to self. Any previous style is replaced. Read more

impl<T> Same for T

type Output = T

Should always be Self

impl<T> ToOwned for T
where T: Clone,

type Owned = T

The resulting type after obtaining ownership.

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.

impl<T> WithSubscriber for T

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more

impl<T> ErasedDestructor for T
where T: 'static,