Struct aws_sdk_directconnect::operation::delete_connection::DeleteConnectionOutput

#[non_exhaustive]
pub struct DeleteConnectionOutput {

    pub owner_account: Option<String>,
    pub connection_id: Option<String>,
    pub connection_name: Option<String>,
    pub connection_state: Option<ConnectionState>,
    pub region: Option<String>,
    pub location: Option<String>,
    pub bandwidth: Option<String>,
    pub vlan: i32,
    pub partner_name: Option<String>,
    pub loa_issue_time: Option<DateTime>,
    pub lag_id: Option<String>,
    pub aws_device: Option<String>,
    pub jumbo_frame_capable: Option<bool>,
    pub aws_device_v2: Option<String>,
    pub aws_logical_device_id: Option<String>,
    pub has_logical_redundancy: Option<HasLogicalRedundancy>,
    pub tags: Option<Vec<Tag>>,
    pub provider_name: Option<String>,
    pub mac_sec_capable: Option<bool>,
    pub port_encryption_status: Option<String>,
    pub encryption_mode: Option<String>,
    pub mac_sec_keys: Option<Vec<MacSecKey>>,
    /* private fields */
}

Information about an Direct Connect connection.

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

owner_account: Option<String>

The ID of the Amazon Web Services account that owns the connection.

connection_id: Option<String>

The ID of the connection.

connection_name: Option<String>

The name of the connection.

connection_state: Option<ConnectionState>

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

• unknown: The state of the connection is not available.

region: Option<String>

The Amazon Web Services Region where the connection is located.

location: Option<String>

The location of the connection.

bandwidth: Option<String>

The bandwidth of the connection.

vlan: i32

The ID of the VLAN.

partner_name: Option<String>

The name of the Direct Connect service provider associated with the connection.

loa_issue_time: Option<DateTime>

The time of the most recent call to DescribeLoa for this connection.

lag_id: Option<String>

The ID of the LAG.

aws_device: Option<String>

The Direct Connect endpoint on which the physical connection terminates.

jumbo_frame_capable: Option<bool>

Indicates whether jumbo frames are supported.

aws_device_v2: Option<String>

The Direct Connect endpoint that terminates the physical connection.

aws_logical_device_id: Option<String>

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

has_logical_redundancy: Option<HasLogicalRedundancy>

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

tags: Option<Vec<Tag>>

The tags associated with the connection.

provider_name: Option<String>

The name of the service provider associated with the connection.

mac_sec_capable: Option<bool>

Indicates whether the connection supports MAC Security (MACsec).

port_encryption_status: Option<String>

The MAC Security (MACsec) port link status of the connection.

The valid values are Encryption Up, which means that there is an active Connection Key Name, or Encryption Down.

encryption_mode: Option<String>

The MAC Security (MACsec) connection encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

mac_sec_keys: Option<Vec<MacSecKey>>

The MAC Security (MACsec) security keys associated with the connection.

Implementations

impl DeleteConnectionOutput

pub fn owner_account(&self) -> Option<&str>

The ID of the Amazon Web Services account that owns the connection.

pub fn connection_id(&self) -> Option<&str>

The ID of the connection.

pub fn connection_name(&self) -> Option<&str>

The name of the connection.

pub fn connection_state(&self) -> Option<&ConnectionState>

The state of the connection. The following are the possible values:

• ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.

• requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.

• pending: The connection has been approved and is being initialized.

• available: The network link is up and the connection is ready for use.

• down: The network link is down.

• deleting: The connection is being deleted.

• deleted: The connection has been deleted.

• rejected: A hosted connection in the ordering state enters the rejected state if it is deleted by the customer.

• unknown: The state of the connection is not available.

pub fn region(&self) -> Option<&str>

The Amazon Web Services Region where the connection is located.

pub fn location(&self) -> Option<&str>

The location of the connection.

pub fn bandwidth(&self) -> Option<&str>

The bandwidth of the connection.

pub fn vlan(&self) -> i32

The ID of the VLAN.

pub fn partner_name(&self) -> Option<&str>

The name of the Direct Connect service provider associated with the connection.

pub fn loa_issue_time(&self) -> Option<&DateTime>

The time of the most recent call to DescribeLoa for this connection.

pub fn lag_id(&self) -> Option<&str>

The ID of the LAG.

pub fn aws_device(&self) -> Option<&str>

The Direct Connect endpoint on which the physical connection terminates.

pub fn jumbo_frame_capable(&self) -> Option<bool>

Indicates whether jumbo frames are supported.

pub fn aws_device_v2(&self) -> Option<&str>

The Direct Connect endpoint that terminates the physical connection.

pub fn aws_logical_device_id(&self) -> Option<&str>

The Direct Connect endpoint that terminates the logical connection. This device might be different than the device that terminates the physical connection.

pub fn has_logical_redundancy(&self) -> Option<&HasLogicalRedundancy>

Indicates whether the connection supports a secondary BGP peer in the same address family (IPv4/IPv6).

pub fn tags(&self) -> &[Tag]

The tags associated with the connection.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .tags.is_none().

pub fn provider_name(&self) -> Option<&str>

The name of the service provider associated with the connection.

pub fn mac_sec_capable(&self) -> Option<bool>

Indicates whether the connection supports MAC Security (MACsec).

pub fn port_encryption_status(&self) -> Option<&str>

The MAC Security (MACsec) port link status of the connection.

The valid values are Encryption Up, which means that there is an active Connection Key Name, or Encryption Down.

pub fn encryption_mode(&self) -> Option<&str>

The MAC Security (MACsec) connection encryption mode.

The valid values are no_encrypt, should_encrypt, and must_encrypt.

pub fn mac_sec_keys(&self) -> &[MacSecKey]

The MAC Security (MACsec) security keys associated with the connection.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .mac_sec_keys.is_none().

impl DeleteConnectionOutput

pub fn builder() -> DeleteConnectionOutputBuilder

Creates a new builder-style object to manufacture DeleteConnectionOutput.

Trait Implementations

impl Clone for DeleteConnectionOutput

fn clone(&self) -> DeleteConnectionOutput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for DeleteConnectionOutput

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for DeleteConnectionOutput

fn eq(&self, other: &DeleteConnectionOutput) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl RequestId for DeleteConnectionOutput

fn request_id(&self) -> Option<&str>

Returns the request ID, or None if the service could not be reached.

impl StructuralPartialEq for DeleteConnectionOutput