Struct aws_sdk_datasync::client::fluent_builders::CreateLocationNfs
source · [−]pub struct CreateLocationNfs { /* private fields */ }
Expand description
Fluent builder constructing a request to CreateLocationNfs
.
Defines a file system on a Network File System (NFS) server that can be read from or written to.
Implementations
sourceimpl CreateLocationNfs
impl CreateLocationNfs
sourcepub async fn send(
self
) -> Result<CreateLocationNfsOutput, SdkError<CreateLocationNfsError>>
pub async fn send(
self
) -> Result<CreateLocationNfsOutput, SdkError<CreateLocationNfsError>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn subdirectory(self, input: impl Into<String>) -> Self
pub fn subdirectory(self, input: impl Into<String>) -> Self
The subdirectory in the NFS file system that is used to read data from the NFS source location or write data to the NFS destination. The NFS path should be a path that's exported by the NFS server, or a subdirectory of that path. The path should be such that it can be mounted by other NFS clients in your network.
To see all the paths exported by your NFS server, run "showmount -e nfs-server-name
" from an NFS client that has access to your server. You can specify any directory that appears in the results, and any subdirectory of that directory. Ensure that the NFS export is accessible without Kerberos authentication.
To transfer all the data in the folder you specified, DataSync needs to have permissions to read all the data. To ensure this, either configure the NFS export with no_root_squash,
or ensure that the permissions for all of the files that you want DataSync allow read access for all users. Doing either enables the agent to read the files. For the agent to access directories, you must additionally enable all execute access.
If you are copying data to or from your Snowcone device, see NFS Server on Snowcone for more information.
For information about NFS export configuration, see 18.7. The /etc/exports Configuration File in the Red Hat Enterprise Linux documentation.
sourcepub fn set_subdirectory(self, input: Option<String>) -> Self
pub fn set_subdirectory(self, input: Option<String>) -> Self
The subdirectory in the NFS file system that is used to read data from the NFS source location or write data to the NFS destination. The NFS path should be a path that's exported by the NFS server, or a subdirectory of that path. The path should be such that it can be mounted by other NFS clients in your network.
To see all the paths exported by your NFS server, run "showmount -e nfs-server-name
" from an NFS client that has access to your server. You can specify any directory that appears in the results, and any subdirectory of that directory. Ensure that the NFS export is accessible without Kerberos authentication.
To transfer all the data in the folder you specified, DataSync needs to have permissions to read all the data. To ensure this, either configure the NFS export with no_root_squash,
or ensure that the permissions for all of the files that you want DataSync allow read access for all users. Doing either enables the agent to read the files. For the agent to access directories, you must additionally enable all execute access.
If you are copying data to or from your Snowcone device, see NFS Server on Snowcone for more information.
For information about NFS export configuration, see 18.7. The /etc/exports Configuration File in the Red Hat Enterprise Linux documentation.
sourcepub fn server_hostname(self, input: impl Into<String>) -> Self
pub fn server_hostname(self, input: impl Into<String>) -> Self
The name of the NFS server. This value is the IP address or Domain Name Service (DNS) name of the NFS server. An agent that is installed on-premises uses this host name to mount the NFS server in a network.
If you are copying data to or from your Snowcone device, see NFS Server on Snowcone for more information.
This name must either be DNS-compliant or must be an IP version 4 (IPv4) address.
sourcepub fn set_server_hostname(self, input: Option<String>) -> Self
pub fn set_server_hostname(self, input: Option<String>) -> Self
The name of the NFS server. This value is the IP address or Domain Name Service (DNS) name of the NFS server. An agent that is installed on-premises uses this host name to mount the NFS server in a network.
If you are copying data to or from your Snowcone device, see NFS Server on Snowcone for more information.
This name must either be DNS-compliant or must be an IP version 4 (IPv4) address.
sourcepub fn on_prem_config(self, input: OnPremConfig) -> Self
pub fn on_prem_config(self, input: OnPremConfig) -> Self
Contains a list of Amazon Resource Names (ARNs) of agents that are used to connect to an NFS server.
If you are copying data to or from your Snowcone device, see NFS Server on Snowcone for more information.
sourcepub fn set_on_prem_config(self, input: Option<OnPremConfig>) -> Self
pub fn set_on_prem_config(self, input: Option<OnPremConfig>) -> Self
Contains a list of Amazon Resource Names (ARNs) of agents that are used to connect to an NFS server.
If you are copying data to or from your Snowcone device, see NFS Server on Snowcone for more information.
sourcepub fn mount_options(self, input: NfsMountOptions) -> Self
pub fn mount_options(self, input: NfsMountOptions) -> Self
The NFS mount options that DataSync can use to mount your NFS share.
sourcepub fn set_mount_options(self, input: Option<NfsMountOptions>) -> Self
pub fn set_mount_options(self, input: Option<NfsMountOptions>) -> Self
The NFS mount options that DataSync can use to mount your NFS share.
Appends an item to Tags
.
To override the contents of this collection use set_tags
.
The key-value pair that represents the tag that you want to add to the location. The value can be an empty string. We recommend using tags to name your resources.
The key-value pair that represents the tag that you want to add to the location. The value can be an empty string. We recommend using tags to name your resources.
Trait Implementations
sourceimpl Clone for CreateLocationNfs
impl Clone for CreateLocationNfs
sourcefn clone(&self) -> CreateLocationNfs
fn clone(&self) -> CreateLocationNfs
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
Auto Trait Implementations
impl !RefUnwindSafe for CreateLocationNfs
impl Send for CreateLocationNfs
impl Sync for CreateLocationNfs
impl Unpin for CreateLocationNfs
impl !UnwindSafe for CreateLocationNfs
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcepub fn borrow_mut(&mut self) -> &mut T
pub fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcepub fn to_owned(&self) -> T
pub fn to_owned(&self) -> T
Creates owned data from borrowed data, usually by cloning. Read more
sourcepub fn clone_into(&self, target: &mut T)
pub fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more