Struct aws_sdk_databasemigration::types::Replication

#[non_exhaustive]
pub struct Replication {

    pub replication_config_identifier: Option<String>,
    pub replication_config_arn: Option<String>,
    pub source_endpoint_arn: Option<String>,
    pub target_endpoint_arn: Option<String>,
    pub replication_type: Option<MigrationTypeValue>,
    pub status: Option<String>,
    pub provision_data: Option<ProvisionData>,
    pub stop_reason: Option<String>,
    pub failure_messages: Option<Vec<String>>,
    pub replication_stats: Option<ReplicationStats>,
    pub start_replication_type: Option<String>,
    pub cdc_start_time: Option<DateTime>,
    pub cdc_start_position: Option<String>,
    pub cdc_stop_position: Option<String>,
    pub recovery_checkpoint: Option<String>,
    pub replication_create_time: Option<DateTime>,
    pub replication_update_time: Option<DateTime>,
    pub replication_last_stop_time: Option<DateTime>,
    pub replication_deprovision_time: Option<DateTime>,
}

Provides information that describes a serverless replication created by the CreateReplication operation.

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

replication_config_identifier: Option<String>

The identifier for the ReplicationConfig associated with the replication.

replication_config_arn: Option<String>

The Amazon Resource Name for the ReplicationConfig associated with the replication.

source_endpoint_arn: Option<String>

The Amazon Resource Name for an existing Endpoint the serverless replication uses for its data source.

target_endpoint_arn: Option<String>

The Amazon Resource Name for an existing Endpoint the serverless replication uses for its data target.

replication_type: Option<MigrationTypeValue>

The type of the serverless replication.

status: Option<String>

The current status of the serverless replication.

provision_data: Option<ProvisionData>

Information about provisioning resources for an DMS serverless replication.

stop_reason: Option<String>

The reason the replication task was stopped. This response parameter can return one of the following values:

• "Stop Reason NORMAL"

• "Stop Reason RECOVERABLE_ERROR"

• "Stop Reason FATAL_ERROR"

• "Stop Reason FULL_LOAD_ONLY_FINISHED"

• "Stop Reason STOPPED_AFTER_FULL_LOAD" – Full load completed, with cached changes not applied

• "Stop Reason STOPPED_AFTER_CACHED_EVENTS" – Full load completed, with cached changes applied

• "Stop Reason EXPRESS_LICENSE_LIMITS_REACHED"

• "Stop Reason STOPPED_AFTER_DDL_APPLY" – User-defined stop task after DDL applied

• "Stop Reason STOPPED_DUE_TO_LOW_MEMORY"

• "Stop Reason STOPPED_DUE_TO_LOW_DISK"

• "Stop Reason STOPPED_AT_SERVER_TIME" – User-defined server time for stopping task

• "Stop Reason STOPPED_AT_COMMIT_TIME" – User-defined commit time for stopping task

• "Stop Reason RECONFIGURATION_RESTART"

• "Stop Reason RECYCLE_TASK"

failure_messages: Option<Vec<String>>

Error and other information about why a serverless replication failed.

replication_stats: Option<ReplicationStats>

This object provides a collection of statistics about a serverless replication.

start_replication_type: Option<String>

The replication type.

cdc_start_time: Option<DateTime>

Indicates the start time for a change data capture (CDC) operation. Use either CdcStartTime or CdcStartPosition to specify when you want a CDC operation to start. Specifying both values results in an error.

cdc_start_position: Option<String>

Indicates the start time for a change data capture (CDC) operation. Use either CdcStartTime or CdcStartPosition to specify when you want a CDC operation to start. Specifying both values results in an error.

cdc_stop_position: Option<String>

Indicates when you want a change data capture (CDC) operation to stop. The value can be either server time or commit time.

recovery_checkpoint: Option<String>

Indicates the last checkpoint that occurred during a change data capture (CDC) operation. You can provide this value to the CdcStartPosition parameter to start a CDC operation that begins at that checkpoint.

replication_create_time: Option<DateTime>

The time the serverless replication was created.

replication_update_time: Option<DateTime>

The time the serverless replication was updated.

replication_last_stop_time: Option<DateTime>

The timestamp when replication was last stopped.

replication_deprovision_time: Option<DateTime>

The timestamp when DMS will deprovision the replication.

Implementations

impl Replication

pub fn replication_config_identifier(&self) -> Option<&str>

The identifier for the ReplicationConfig associated with the replication.

pub fn replication_config_arn(&self) -> Option<&str>

The Amazon Resource Name for the ReplicationConfig associated with the replication.

pub fn source_endpoint_arn(&self) -> Option<&str>

The Amazon Resource Name for an existing Endpoint the serverless replication uses for its data source.

pub fn target_endpoint_arn(&self) -> Option<&str>

The Amazon Resource Name for an existing Endpoint the serverless replication uses for its data target.

pub fn replication_type(&self) -> Option<&MigrationTypeValue>

The type of the serverless replication.

pub fn status(&self) -> Option<&str>

The current status of the serverless replication.

pub fn provision_data(&self) -> Option<&ProvisionData>

Information about provisioning resources for an DMS serverless replication.

pub fn stop_reason(&self) -> Option<&str>

The reason the replication task was stopped. This response parameter can return one of the following values:

• "Stop Reason NORMAL"

• "Stop Reason RECOVERABLE_ERROR"

• "Stop Reason FATAL_ERROR"

• "Stop Reason FULL_LOAD_ONLY_FINISHED"

• "Stop Reason STOPPED_AFTER_FULL_LOAD" – Full load completed, with cached changes not applied

• "Stop Reason STOPPED_AFTER_CACHED_EVENTS" – Full load completed, with cached changes applied

• "Stop Reason EXPRESS_LICENSE_LIMITS_REACHED"

• "Stop Reason STOPPED_AFTER_DDL_APPLY" – User-defined stop task after DDL applied

• "Stop Reason STOPPED_DUE_TO_LOW_MEMORY"

• "Stop Reason STOPPED_DUE_TO_LOW_DISK"

• "Stop Reason STOPPED_AT_SERVER_TIME" – User-defined server time for stopping task

• "Stop Reason STOPPED_AT_COMMIT_TIME" – User-defined commit time for stopping task

• "Stop Reason RECONFIGURATION_RESTART"

• "Stop Reason RECYCLE_TASK"

pub fn failure_messages(&self) -> &[String]

Error and other information about why a serverless replication failed.

If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use .failure_messages.is_none().

pub fn replication_stats(&self) -> Option<&ReplicationStats>

This object provides a collection of statistics about a serverless replication.

pub fn start_replication_type(&self) -> Option<&str>

The replication type.

pub fn cdc_start_time(&self) -> Option<&DateTime>

Indicates the start time for a change data capture (CDC) operation. Use either CdcStartTime or CdcStartPosition to specify when you want a CDC operation to start. Specifying both values results in an error.

pub fn cdc_start_position(&self) -> Option<&str>

Indicates the start time for a change data capture (CDC) operation. Use either CdcStartTime or CdcStartPosition to specify when you want a CDC operation to start. Specifying both values results in an error.

pub fn cdc_stop_position(&self) -> Option<&str>

Indicates when you want a change data capture (CDC) operation to stop. The value can be either server time or commit time.

pub fn recovery_checkpoint(&self) -> Option<&str>

Indicates the last checkpoint that occurred during a change data capture (CDC) operation. You can provide this value to the CdcStartPosition parameter to start a CDC operation that begins at that checkpoint.

pub fn replication_create_time(&self) -> Option<&DateTime>

The time the serverless replication was created.

pub fn replication_update_time(&self) -> Option<&DateTime>

The time the serverless replication was updated.

pub fn replication_last_stop_time(&self) -> Option<&DateTime>

The timestamp when replication was last stopped.

pub fn replication_deprovision_time(&self) -> Option<&DateTime>

The timestamp when DMS will deprovision the replication.

impl Replication

pub fn builder() -> ReplicationBuilder

Creates a new builder-style object to manufacture Replication.

Trait Implementations

impl Clone for Replication

fn clone(&self) -> Replication

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Replication

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for Replication

fn eq(&self, other: &Replication) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for Replication